We are OPEN
Click here for updates on our current status.
 

Slideshow

Set Descending Direction

1-25 of 27

Page:
  1. 1
  2. 2
  1. High quality aluminium headset with cartridge bearings for standard 1 1/8" (1.125 inch) frames and forks Learn More
  2. Premium sealed shock hardware for bikes that like to get wet and muddy. 21.9 mm width to fit 1/2" shock eyelets. Heavy duty stainless steel wear surfaces, IGUS pre-tensioned bushing for maximum life and Shockcraft's own sealing collars to keep contaminants out. Learn More
  3. Application: Monocrome, Raceface X-Type & FSA MegaExo Bottom Brackets ID: 25 mm, OD: 37 mm, W: 7 mm Stainless steel balls and races Available with Bearing Press Service & CNC Storm Drains Learn More
  4. Application: Campagnolo Ultra-Torque, some FSA MegaExo Road BB's, Shimano HT2 Bottom Brackets for Mountain and Road (including internal BB91-41, internal BB91-42, external HT2 and road HT2)
    ID: 25 mm, OD: 37 mm, W: 6 mm
    Bearing materials: stainless steel cage and ceramic balls
    Lubricant, factory fill with Shockcraft Lightning Grease
    (Narrow version of 6805 Caged Bearing)
    Special Monocrome 6 Month Guarantee Learn More
  5. Coloured stem cap available in 6 colours to fit bike with 1 1/8" steerer Learn More
  6. Corset for Fox FLOAT Rear Shocks (Vorsprung)

    Regular Price: US$119.75

    Special Price US$59.88

    Vorsprung Corset air sleeve with higher volume negative
    Fits Fox FLOAT and DHX Air rear shocks
    Requires grease and air chamber lubricant (Float Fluid or RWC APL) to install

    Learn More
  7. Additional air-can seals for dual layer air-cans.
    Kit contains two o-rings.
    Only required for 2000-2016 shocks with the second layer can.

    Part Code:  KS-FAUXFLO-DUALCAN Learn More
  8. Valve stem seals for Fox FLOAT shocks.
    Larger seal for 2000-2008 shocks, smaller for 2009+

    Part Code:  KS-FAUXFLO-AIRVALVE Learn More
  9. Additional air-can seals for 2016-2017 Evol dual layer air-cans.
    Kit contains two o-rings.
    Only required for 2016-17 shocks with the second layer negative Evol can.

    Part Code:  KS-FAUXFLO-EVOLCAN Learn More
  10. Heart Stem Cap 1 1/8" (Shockcraft)

    US$9.03

    Limited Stock

    CNC machined heart stem-caps to fit bikes with 1 1/8" steerers
    Only red, pewter and black left
    Comes with star washer, bolt & rubber cap

    Learn More
    • Out of stock

  11. Luftkappe for RockShox Pike/Lyrik 2014+ Solo Air (Vorsprung)

    US$102.30

    Available Ex NZ Supplier 2 Days

    Vorsprung Luftkappe air piston with higher volume negative
    Fits 2014-2017 RockShox Pike & Lyrik forks
    Fits 2018+ Lyrik & Yari
    Fits 2018+ Rockshox Pike with an A2 Adapter.
    Not compatible with Debonair V2 or V3 shafts.
    Requires 10 mm shaft clamp to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  12. Shockcraft replacement seal kit for Manitou fork 27mm air pistons.
    These are found in Manitou Nixon and Minute MARS forks.
    Replacement for out of production seal kit 141-28131-K023
    Fits pistons 141-25698 & 141-30416-K023

    Shockcraft Part Code:  KS-MAN-27mm-AIRSEAL
    Learn More
  13. Manitou Mara Pro Rear Shock - Imperial Eyelet

    Regular Price: US$728.15

    Special Price US$580.72

    Limited - Some Sizes In Stock Now

    The Mara Pro is Manitou's new piggy back heavy duty air shock
    Imperial eyelet version (not trunnion mount)
    Rebound adjust
    High Speed Compression (HSC) adjust
    Low Speed Compression (LSC) adjust
    Selectable platform (work/party) switch
    Fully tunable

    Manitou Part Codes: 192-36851-A015 to 192-36851-A017

    Learn More
  14. Manitou Mara Pro Rear Shock - Metric Eyelet

    Regular Price: US$728.15

    Special Price US$580.72

    Limited - Some Sizes In Stock Now

    The Mara Pro is Manitou's new piggy back heavy duty air shock
    Metric eyelet version (not trunnion mount)
    Rebound adjust
    High Speed Compression (HSC) adjust
    Low Speed Compression (LSC) adjust
    Selectable platform (work/party) switch
    Fully tunable.

    Manitou Part Codes: 192-36851-A021 to 192-36851-A026

    Learn More
  15. Manitou Mara Pro Rear Shock - Metric Eyelet Trunnion

    Regular Price: US$728.15

    Special Price US$580.72

    Limited - Some Sizes In Stock Now

    The Mara Pro is Manitou's new piggy back heavy duty air shock
    Metric trunnion version (trunnion top, eyelet bottom)
    Rebound adjust
    High Speed Compression (HSC) adjust
    Low Speed Compression (LSC) adjust
    Selectable platform (work/party) switch
    Fully tunable

    Manitou Part Codes: 192-36852-A013 to 192-36852-A020

    Learn More
  16. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel or stainless bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with MTB Shimano HT2, Raceface X type and FSA MegaExo cranksets (24 mm)

    Learn More
  17. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel or stainless bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with MTB Shimano HT2, Raceface X type and FSA MegaExo cranksets (24 mm)

    Learn More
  18. High Quality BSA Threaded external bottom bracket
    Using standard, replaceable, 6805 bearings
    Fully rebuildable
    Steel or stainless bearing options
    CNC Storm Drain options for extreme wet conditions
    Compatible with MTB SRAM/Truvativ GXP cranksets (24-22 mm)

    Available in red or gold (pewter no longer available)

    Learn More
  19. Party Pack for Fork Service

    From: US$32.01

    To: US$204.15

    Get Super Smooth Suspension with Supergliss, Slickoleum & SKF Seals.  Our fork service party packs include the oils, grease and tools specially selected by Shockcraft to help make your forks run smoother.

    STEP 1: Buy fork service party pack & SKF seals (select your SKF kit/s here)
    STEP 2: Get together with your riding buddies & service forks
    STEP 3 (most important): Enjoy the ride!

    Motorex fork oils & lubricants are also available at a lower price in 1 & 4 litre refilled bottles

    Learn More
    • Out of stock

  20. Presta to Schrader valve adapter. CNC aluminium with o-ring seal. Learn More
  21. Monocrome Screw-Fit 41 mm Bottom Bracket for replacement and upgrade of press-fit BB86 and BB92 bottom brackets.  Designed and engineered by Shockcraft to solve fitment, creaking and bearing life issues.

    Fits Shimano, RaceFace, FSA etc 24 mm crank spindles.
    Fits SRAM/Truvative GXP with optional "Engagement Ring" adapter set.
    FIts Mountain Bike frames with 92 mm BB Shell width (incl 89.5 mm with 2.5 mm spacer - purchase spacer separately here).
    Fits Road & Cyclocross frames with 86 mm BB Shell width by removing internal spacer.

    Installs and removes with an IceToolz 11D3 tool, Park BBT-18 tool or equivalent used for ISIS bottom brackets and crank spiders.

    Optional extras (purchased separately):
    Installation tools - IceToolz 11D3 tool or Park BBT-18 tool
    2.5 mm spacer (for MTB frames with 89.5 mm shell width)

    Learn More
  22. Monocrome Screw-Fit 46 mm Bottom Bracket for replacement and upgrade of press-fit 30 mm (PF30) bottom brackets.  Designed and engineered by Shockcraft's engineer to solve fitment, creaking and bearing life issues.

    FIts Mountain Bike frames with 73 mm BB Shell width.
    Fits Road & Cyclocross frames with 68 mm BB Shell width by removing internal spacer.

    Installs and removes with an IceToolz 11D3 tool, Park BBT-18 tool or equivalent used for ISIS bottom brackets and crank spiders.

    Learn More
  23. Seal Press Tool 32 & 34 mm (RWC)

    US$100.62

    Last One Left

    Double ended tool for pressing wiper seals into 32 or 34 mm stanchioned forks
    Works with both flanged and flangeless wiper seals
    Designed & tested to work with SKF flangeless seals
    Keeps seals straight and sets depth flush with top of fork casting in one hit
    Prevents damage to seals and forks
    Manufactured by Real World Cycling (RWC) Learn More
  24. Seal Press Tool 35 & 36 mm (RWC)

    US$114.94

    Last One Left

    Double ended tool for pressing wiper seals into 35 or 36 mm stanchioned forks
    Works with both flanged and flangeless wiper seals
    Designed & tested to work with SKF flangeless seals
    Keeps seals straight and sets depth flush with top of fork casting in one hit
    Prevents damage to seals and forks

    Manufactured by Real World Cycling (RWC) Learn More
  25. Shockcraft complete shock o-ring kit to fit Specialized Seatstay Brain rear shocks from 2007-2008
    Installation requires specialised tooling, knowledge and a vacuum bleeder.
    Complete rebuild kit also available.

    Shockcraft Part Code:  KSI-SPEC-AFR-SEATSTAY-BRAIN-2007-08-ORING
    Learn More

Set Descending Direction

1-25 of 27

Page:
  1. 1
  2. 2