Fox

Parts to fit Fox suspension.

Set Ascending Direction

1-25 of 48

Page:
  1. 1
  2. 2
  1. Vorsprung Smashpot coil conversion system for Fox 36 forks
    Fits 2015+ Fox 36 forks with M34x0.8mm top-caps.
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in.
    Will not fit E bike forks with smaller ID stanchions and caps.
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  2. Fox Rear Shock seal kit for RP23 rear shocks
    Boost-Valve and shim versions with 3/8" (9.5mm) shafts
    Available only with Shockcraft Service

    Fox Part Code: 803-00-381 Learn More
  3. The MRP Ramp Control Cartridge is a bolt in air spring modifier for selected Fox and RS forks. It divides the main air chamber into two and gives adjustable control over the flow between the two, providing more support at the twist of a dial.

    Learn More
  4. Party Pack for Fork Service

    From: $43.40

    To: $222.30

    Get Super Smooth Suspension with Supergliss, Slickoleum & SKF Seals.  Our fork service party packs include the oils, grease and tools specially selected by Shockcraft to help make your forks run smoother.

    STEP 1: Buy fork service party pack & SKF seals (select your SKF kit/s here)
    STEP 2: Get together with your riding buddies & service forks
    STEP 3 (most important): Enjoy the ride!

    Motorex fork oils & lubricants are also available at a lower price in 1 & 4 litre refilled bottles

    Learn More
  5. Vorsprung Luftkappe extended air piston and low volume sealhead for Fox 36 NA1 forks
    Fits 2015-17 Fox Float 36 NA forks with central needle in air chamber
    Requires 10 mm shaft clamp to install
    Included low volume sealhead extension increases negative volume further
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  6. Vorsprung Luftkappe air piston with higher volume negative
    Fits 2018+ Fox Float 36 Evol Performance & Factory Series forks
    Requires roll pin tool to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  7. Vorsprung Luftkappe air piston and low volume sealhead for Fox 34 NA2 forks
    Fits 2016-17 Fox Float 34 NA2 Performance & Factory Series forks (130+ mm only)
    Requires shaft clamp to install and is threaded onto air shaft.
    Included low volume sealhead increases negative volume similar to 2018 Evol spec
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  8. Vorsprung Luftkappe air piston with higher volume negative
    Fits 2018+ Fox Float 34 Evol Performance & Factory Series forks
    Requires roll pin tool to install as it is pinned to the air shaft.
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  9. Vorsprung Fractive upgrade tuning kit for Fox FIT4 Factory-Series fork dampers
    Fits only FIT4 factory series dampers with LSC adjuster dial in centre of the Firm-Medium-Open dial
    Requires significant tools and knowledge to install
    Can be installed as part of any Shockcraft complete-fork or damper-only service (book here)

    Learn More
  10. Air spring volume spacer for Fox 36 Rhythm forks with thicker wall stanchions than Factory & Performance.
    Note that E bike F36 forks have thicker wall stanchions and use F34 volume spacers
    Purple colour - Smaller diameter than Orange
    10 cc volume each
    Fox Part Code: 234-04-079 Learn More
  11. Air spring volume spacer for Fox 36 forks
    Note that E bike F36 forks have thicker wall stanchions and use F34 volume spacers
    Orange colour
    10 cc volume each
    Fox Part Code: 234-04-736

    Learn More
  12. Air spring volume spacer for Fox 34 forks
    Also E bike F36 forks have thicker wall stanchions and use F34 volume spacers
    Green colour
    10 cc volume each
    Fox Part Code: 234-04-953 Learn More
  13. Air spring volume spacer for Fox 32 forks
    Also E bike F34 forks have thicker wall stanchions and use F32 volume spacers
    Blue colour
    8 cc volume each
    Fox Part Code: 234-04-811 Learn More
  14. Contains new shaft seal, shaft wiper & shaft bushing Fits older Fox Vanilla/Vanilla R/RX/RC/TC shocks with 3/8" (9.53 mm) shafts Aftermarket kit supplied by Shockcraft Learn More
  15. Fox Part Code: 803-01-251 Learn More
  16. SKF Low Friction Flangeless Fork Seal kit for Fox 40 mm forks
    These flangeless seals have the same fork compatibility as the flanged option
    Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals

    Learn More
  17. SKF Low Friction Flanged Fork Seal kit for Fox 40 mm forks
    These flanged seals have the same fork compatibility as the flangeless option
    Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals

    Learn More
  18. SKF Low Friction Flangeless Fork Seal kit for Fox 36 mm forks
    These flangeless seals have the same fork compatibility as the flanged option
    Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals
    We recommend the use of a seal press tool for installation

    Learn More
  19. SKF Low Friction Flanged Fork Seal kit for Fox 36 mm forks
    These flanged seals have the same fork compatibility as the flangeless option
    Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals
    A seal press tool is not essential for installation of the flanged seals but it does make the job easier

    Learn More
  20. Fox 34 mm Flangeless Fork Seal Kit (SKF)

    From: $70.00

    To: $225.90

    SKF Low Friction Flangeless Fork Seal kit for Fox 34 mm forks
    These flangeless seals have the same fork compatibility as the flanged option
    Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals
    We recommend the use of a seal press tool for installation to keep flangeles seals straight and set depth correctly.
    Optional fork oil, lubricants, grease & oil syringes

    Learn More
  21. Fox 34 mm Flanged Fork Seal Kit (SKF)

    From: $70.00

    To: $225.90

    SKF Low Friction Flanged Fork Seal kit for Fox 34 mm forks
    These flanged seals have the same fork compatibility as the flangeless option
    Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals
    A seal press tool is not essential for installation of the flanged seals but it does make the job easier
    Optional fork oil, lubricants, grease, oil syringe & seal press tool

    Learn More
  22. Fox 32 mm Flangeless Fork Seal Kit (SKF)

    From: $72.50

    To: $228.40

    SKF Low Friction Flangeless Fork Seal kit for Fox 32 mm forks
    These flangeless seals have the same fork compatibility as the flanged option
    Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals
    We recommend the use of a seal press tool for installation to keep flangeles seals straight and set depth correctly.
    Optional fork oil, lubricants, grease, oil syringe & seal press tool

    Learn More
  23. Fox 32 mm Flanged Fork Seal Kit (SKF)

    From: $70.00

    To: $225.90

    SKF Low Friction Flanged Fork Seal kit for Fox 32 mm forks
    These flanged seals have the same fork compatibility as the flangeless option
    Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals
    A seal press tool is not essential for installation of the flanged seals but it does make the job easier
    Optional fork oil, lubricants, grease, oil syringe & seal press tool

    Learn More
  24. Fits all Fox Float rear shocks from model year 2000 onward
    Genuine Fox kit.
    Fox Part Number 803-00-142 Learn More
  25. Fork Service Kit Fox 40 Forks 2005-2015

    From: $114.90

    To: $144.40

    Fork service kit for F40 forks 2005-2015 using Open Bath R dampers or FIT R/RC2 dampers.
    Kit contains SKF fork seal kit, fork oil, bushing lubricant, air chamber lubricant, Slickoleum assembly grease & oil syringe.

    Learn More

Set Ascending Direction

1-25 of 48

Page:
  1. 1
  2. 2