Shaft clamp tool for use in installation of Luftkappe & Secus

Learn More

ABS+ compression damper kit to upgrade Manitou 32 mm forks (Minute/Marvel/Machete/Drake/Circus/Tower).
Includes damper and machined aluminium knob with retainer screws.
Pro level with aluminium knobs and piston.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston; does not fit 2020+ R7 or Machete forks (ABS+ damper 141-26532-K001 fits these forks)
Tune: ABS+ production XC stack (CV-11411-03).  Fully tunable and re-valvable to fit any rider weight or terrain.

Shim kit and revalving instructions here.

Manitou Part Code: 141-26532-K013

Learn More

ABS+ Fork compression damper Minute MRD, with alloy knob.
16mm piston for lightweight MRD damper only.

Manitou Part Code: 141-26532-K005 Learn More

ABS+ damper with MILO remote lockout kit
Fits 2020+ Manitou R7 Pro, R7 Expert & Machete Comp forks
Threads M29.6x0.8mm.
Can be converted to crown adjust.

Manitou Part Code: 141-38117-K029 Learn More

ABS+ Fork compression damper kit for Minute/Marvel Expert.
Fits most 32mm Manitou forks from 2007-2019.
M30x1.0 cap threads, red aluminium piston & knob.  Easily tuned.

Manitou Part Code: 141-26532-K010

Learn More

ABS+ damper kit to upgrade Manitou Circus Comp 32 mm jump forks with steel legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Gold anodised alloy piston is 29mm OD (excluding oring) and only fits the chromed steel legs, it will not fit alloy stanchion forks.
Jump tune features a lot of compression damping.
Fitment: M30 x 1.0 mm cap threads, 29 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K006

Learn More

ABS+ damper kit for Manitou Circus Expert 32 mm jump forks with alloy legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Red alloy piston is 28mm OD (excluding oring) and fits fits the majority of Minute, Marvel, Machete and Circus Expert forks.
Fitment: M30 x 1.0 mm cap threads, 28 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K007 Learn More

ABS+ compression damper kit to fit Manitou J-Unit Machete 20" forks.
Includes damper and plastic adjuster knob with retainer screws.
Comp level with pastic knobs and damper piston.
Shorter length than usual 32mm ABS+ dampers.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: J-unit Kids.  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-36683-K009 Learn More

ABS+ compression damper kit to upgrade Manitou 32 mm forks (Minute/Marvel/Machete/Drake/Circus/Tower).
Includes damper and moulded plastic with retainer screws and index balls/springs.
Comp level with plastic knobs and piston.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: ABS+ production XC stack (CV-11411-03).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K002  Superceeded by Manitou Part Code: 141-31938-K002

Learn More

ABS+ Fork Compression Damper with HBO for Minute Pro
Has hydraulic-bottom-out (HBO) for Minute Pro/Expert forks with HBO on rebound shaft.
M30x1.0 threads, blue aluminium piston (27.2mm) for thicker wall stanchions, alloy knob.

Manitou Part Code: 141-31938-K012

Learn More

ABS+ compression damper kit for Manitou R7, M30 & Markhor forks.
Fully tunable and revalvable.
25mm green piston and M26.5x1.00mm cap threads.

Manitou Part Code: 141-26532-K001

Learn More

Shims, balls & springs for DIY tuning of Manitou ABS+ compression dampers
ABS+ tuning guide can be found here
Manitou Part Code: 141-32511-K001

Learn More

IVA: Incremental Volume Adjust A 5 position spacer system to tune positive air chamber volume and increase progression
Thread M31 x 0.8 mm
Finer thread than the Mattoc/Magnum IVA upgrade kit

Manitou Part Code: 141-35384-K006 Learn More

Vorsprung Corset air sleeve with higher volume negative
Fits Fox FLOAT and DHX Air rear shocks
Requires grease and air chamber lubricant (Float Fluid or RWC APL) to install

Learn More

Dorado IRT (Infinite Rate Tune) upgrade assembly Fits all Manitou Dorado forks 2009 onwards Easy installation in place of lower leg air cap Includes instructions & pressure guide Manitou Part Code: 141-32668-K005 Learn More

Vorsprung Fractive upgrade tuning kit for Fox FIT4 Factory-Series fork dampers 2015-2019
Fits only FIT4 factory series dampers with LSC adjuster dial in centre of the Firm-Medium-Open dial
Requires significant tools and knowledge to install
Can be installed as part of any Shockcraft complete-fork or damper-only service (book here)

Learn More

Shockcraft designed & Manufactured High Flow piston (rebound & mid valve) for Ohlins STX22 & TTX22 forks.
Fits Ohlins RXF forks with TTX 22 or STX 22 dampers with 22mm pistons.  Not compatible with 18mm dampers.
This piston greatly increases oil flow on compression and rebound to allow the fork to respond to sharp impacts in a way the stock fork cannot.
Hard anodised aluminium with PTFE glide-ring 22 mm OD.  Bundle product includes PTFE band and valving configuration drawings.

Shockcraft Part Code: SC-PISTON-OHLINS-22HF

Learn More

Replacement IFP (internal floating piston) set for DT Equalizer 2 & 3 rear shocks
Designed and Manufactured by Shockcraft
These were pull shocks fitted to Scott Genius Bikes in the mid 00's to early 10's
Originals have seals which are unservicable
These take standard O-ring seals
Sold as a pair, only available with Shockcraft Service Learn More

Spring backed IFP (internal floating piston) set for 2002-2003 Manitou Dorado
Designed and Manufactured by Shockcraft
These Dorado used a foam compensator which fall apart from age.
New IFP setup uses a coil spring and standard sized seals for future servicability

Available as a kit or installed by Shockcraft Learn More

Damper knob and plate for Manitou ABS+ and TPC dampers.
6mm internal hex
Black anodised aluminium knob and aluminium detent plate
Fits all ABS+ dampers since 2011 and TPC+ from approx 2007
No lever allows full rotation.
Used on Circus forks

Manitou part code:  141-27177-K007

Learn More

Adapter for installing 2014+ RS Pike/Lyrik Solo Air Luftkappe for A2 chassis Pike into 2018 RockShox Pike with B1 chassis.

Note 29+ Pike (2017/18) is built on the Lyrik/Yari B1 chassis and does not require this adapter.

Learn More

Vorsprung Luftkappe air piston with higher volume negative
Fits 2018+ Fox Float 34 Evol Performance & Factory Series forks
Fits 2021+ Fox 38 forks
Requires roll pin tool to install as it is pinned to the air shaft.
Can be installed as part of any Shockcraft service (book here)

Learn More

Vorsprung Luftkappe air piston and low volume sealhead for Fox 34 NA2 forks
Fits 2016-17 Fox Float 34 NA2 Performance & Factory Series forks (130+ mm only)
Requires shaft clamp to install and is threaded onto air shaft.
Included low volume sealhead increases negative volume similar to 2018 Evol spec
Can be installed as part of any Shockcraft service (book here)

Learn More

Vorsprung Luftkappe air piston with higher volume negative
Fits 2018+ Fox Float 36 Evol Performance & Factory Series forks
Requires roll pin tool to install
Can be installed as part of any Shockcraft service (book here)

Learn More

Vorsprung Luftkappe air piston with higher volume negative
Fits 2014-2017 RockShox Pike & Lyrik forks
Fits 2018+ Lyrik & Yari
Fits 2018+ Rockshox Pike with an A2 Adapter.
Not compatible with Debonair V2 or V3 shafts.
Requires 10 mm shaft clamp to install
Can be installed as part of any Shockcraft service (book here)

Learn More