Upgrade Parts

Set Ascending Direction

1-25 of 39

Page:
  1. 1
  2. 2
  1. Individual coil springs for the Vorsprung Smashpot coil conversion system.
    Spring rates available from 30-80 lb/in in 5 lb/in increments
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  2. Vorsprung Smashpot coil conversion system for Rockshox Lyrik & Yari forks
    Fits Rockshox Lyrik, Yari, Some Pike & Revelation forks with 35mm stanchions and M32.5 x0.5mm top-caps (fine thread)
    M32.5x1.0 (Coarse thread) kit for Non Boost Pike available on request.
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in.
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  3. Vorsprung Smashpot coil conversion system for Fox 36 forks
    Fits 2015+ Fox 36 forks with M34x0.8mm top-caps.
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in.
    Will not fit E bike forks with smaller ID stanchions and caps.
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  4. RockShox Lyrik/Yari Charger 2 Damper RCT3 (SRAM)

    $426.00

    Available on backorder

    Charger 2 RCT3 damper upgrade kit.
    Fits 35mm Lyrik, Yari & Pike A2 29+ forks which use the Lyrik chassis.
    580mm overall length. For 170mm travel.
    Includes adjuster knobs & foot bolt.
    Top cap threads 32 x 0.5 mm
    SRAM Part Code: 00.4018.783.019

    Shockcraft can tune this damper for you before delivery.

     

    Learn More
  5. Charger 2 RC2 damper upgrade kit.
    Tuned by Shockcraft and used approx 3 times for development
    Normally $816 (551 damper plus 265 for tuning)
    Tune is ideal for 70-80kg riders and larger riders can crank up the HSC.

    One only available at $551 incl GST ready to go.

    Self contained charger2 damper for repair or upgrade.
    Adjustable 4 click High Speed Compression (HSC), 19 click Low Speed Compression (LSC) and Low Speed rebound (LSR)
    Fits 35mm Lyrik 27/29, Yari 27/29 & Pike A2 29+ forks which use the Lyrik chassis.
    580mm overall length. For up to 180mm travel.
    Includes adjuster knobs & foot bolt.
    Top cap threads 32 x 0.5 mm
    Shipping dimensions:  75x75x630mm

    SRAM Name:  AM UPGRADE KIT CHARGER2 RC2 LYRIK CRN A1
    SRAM Part Code: 00.4018.783.024

    Shockcraft has tune this damper for you before delivery.

    Learn More
  6. Damper Upgrade Kit CHARGER2.1 RC2 Crown LYRIK B1+/YARI A1+ 2016+ (SRAM)
    Self contained charger2.1 damper for repair or upgrade.
    Adjustable 4 click High Speed Compression (HSC), 19 click Low Speed Compression (LSC) and Low Speed rebound (LSR)
    Fits 35mm Lyrik 27/29, Yari 27/29 & Pike A2 29+ forks which use the Lyrik chassis.
    580mm overall length. For up to 180mm travel.
    Includes adjuster knobs & foot bolt.
    Top cap threads 32 x 0.5 mm
    Shipping dimensions:  75x75x630mm
    Charger 2.1 is a mid 2019 update with better damping circuits, lower friction and softer compression damping than Charger 2.0

    SRAM Part Code: 00.4020.170.000

    Shockcraft can tune this damper for you before delivery.  This improves small bump compliance and support.  Important for hard and fast riders.

    Learn More
  7. Debonair air shafts have higher negative air volume and lower friction than previous air springs.  This gives you better small bump response and lets you run more air pressure for more mid stroke support.  They are a bolt-in upgrade, but only fit solo-air forks.  Debonair shafts are also available in different lengths if you want to change your fork travel.  Select the correct one for your forks.

    These are available for self-install or can be installed as part of a Shockcraft service.

    We stock 160 mm Debonair shafts.  Other sizes available approx 2 days lead-time. Learn More
  8. Rockshox BoXXer Damper Upgrade Charger 1 (SRAM)

    $630.00

    Available on backorder

    BoXXer Charger 1 RC damper upgrade kit Fits 35 mm BoXXer forks 2010-2018 A1/A2/B1/B2 (does not fit 2019 C1 BoXXer) 780 mm overall length For 200 mm travel Includes adjuster knobs, foot bolt, casting reducer, mid shaft support and bleed kit Top cap threads 32.5 x 1 mm SRAM Part Code: 00.4018.783.000 Shockcraft can tune this damper for you before delivery Learn More
  9. The MRP Ramp Control Cartridge is a bolt in air spring modifier for selected Fox and RS forks. It divides the main air chamber into two and gives adjustable control over the flow between the two, providing more support at the twist of a dial.

    Learn More
  10. King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Manitou Part Code: 142-31535-K033 Learn More
  11. King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Manitou Part Code: 142-31535-K032 Learn More
  12. King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Fits 190x 50 mm & 200 x 50 mm McLeod rear shocks Manitou Part Code: 142-31535-K030 Learn More
  13. IVA: Incremental Volume Adjust A 5 position spacer system to tune positive air chamber volume and increase progression Manitou Part Code: 141-32668-K001 Learn More
  14. Mattoc/Magnum IRT Upgrade Kit (Manitou)

    $153.31

    Available on backorder

    IRT: Infinite Rate Tune Adds a second individually tunable air chamber to the positive air side of Mattoc & Magnum forks Manitou Part Code: 141-32668-K003 Learn More
  15. Upgrade your Mattoc Expert to Mattoc Pro specification.
    Requires the Mattoc Pro rebound shaft assembly
    Compression damping requires either the Mattoc Pro MC2 compression assembly or convert your Expert compression damper with the Pro HBO Cup.
    27" wheel size for up to 160 mm travel

    Manitou Part Codes: 141-30996-K017 (Rebound Assembly) & 141-30996-K001 (Compression Damper Assembly) or 126-30377 (Mattoc Pro HBO Cup)

    Learn More
  16. Roll pin tool for use in installation of Luftkappe in Fox Float 34 Evol 2018+, 34 NA2 2016-17 & 36 Evol 2018+ forks

    Learn More
  17. Vorsprung Luftkappe air piston with higher volume negative
    Fits 2014-2017 RockShox Pike & Lyrik forks
    Fits 2018+ Lyrik & Yari
    Fits 2018+ Rockshox Pike with an A2 Adapter.
    Requires 10 mm shaft clamp to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  18. Vorsprung Luftkappe extended air piston and low volume sealhead for Fox 36 NA1 forks
    Fits 2015-17 Fox Float 36 NA forks with central needle in air chamber
    Requires 10 mm shaft clamp to install
    Included low volume sealhead extension increases negative volume further
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  19. Vorsprung Luftkappe air piston with higher volume negative
    Fits 2018+ Fox Float 36 Evol Performance & Factory Series forks
    Requires roll pin tool to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  20. Vorsprung Luftkappe air piston and low volume sealhead for Fox 34 NA2 forks
    Fits 2016-17 Fox Float 34 NA2 Performance & Factory Series forks (130+ mm only)
    Requires shaft clamp to install and is threaded onto air shaft.
    Included low volume sealhead increases negative volume similar to 2018 Evol spec
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  21. Vorsprung Luftkappe air piston with higher volume negative
    Fits 2018+ Fox Float 34 Evol Performance & Factory Series forks
    Requires roll pin tool to install as it is pinned to the air shaft.
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  22. Adapter for installing 2014+ RS Pike/Lyrik Solo Air Luftkappe for A2 chassis Pike into 2018 RockShox Pike with B1 chassis.

    Note 29+ Pike (2017/18) is built on the Lyrik/Yari B1 chassis and does not require this adapter.

    Learn More
  23. Shaft clamp tool for use in installation of Luftkappe in RockShox Pike, Lyrik or Yari forks

    Learn More
  24. Replacement IFP (internal floating piston) set for DT Equalizer 2 & 3 rear shocks
    Designed and Manufactured by Shockcraft
    These were pull shocks fitted to Scott Genius Bikes in the mid 00's to early 10's
    Originals have seals which are unservicable
    These take standard O-ring seals
    Sold as a pair, only available with Shockcraft Service Learn More
  25. Shockcraft modified High Flow piston (rebound & mid valve) for Pro level forks with cartridge rebound
    Fits Manitou Mattoc Pro, Magnum Pro, Mastodon Pro, Minute Pro, Machete Pro etc.
    This piston greatly increases oil flow on sharp impacts and on very rough ground at speed, increasing reaction speed, removing high speed harshness and allowing more compression damping to be run
    Blue aluminium with PTFE glide-ring 16 mm OD
    Part Code: 126-27209HF

    Exchange high flow pistons also available

    Learn More

Set Ascending Direction

1-25 of 39

Page:
  1. 1
  2. 2