Vorsprung Luftkappe extended air piston and low volume sealhead for RockShox Zeb forks
Fits 2021-22 RockShox Zeb forks, fits 2023 Zeb if 2021-22 air shaft installed
Requires 10 mm shaft clamp to install
Can be installed as part of any Shockcraft service (book here)

Learn More

Roll pin tool for use in installation of Luftkappe in Fox Float 34 Evol 2018+, 34 NA2 2016-17 & 36 Evol 2018+ forks

Learn More

Upgrade your Mattoc Expert to Mattoc Pro specification.
Requires the Mattoc Pro rebound shaft assembly
Compression damping requires either the Mattoc Pro MC2 compression assembly or convert your Expert compression damper with the Pro HBO Cup.
27" wheel size for up to 160 mm travel

Manitou Part Codes: 141-30996-K017 (Rebound Assembly) & 141-30996-K001 (Compression Damper Assembly) or 126-30377 (Mattoc Pro HBO Cup)

Learn More

IRT: Infinite Rate Tune
Adds a second air chamber for independent tuning of mid-end stroke.
Coarse thread M32x1.0mm for 2014-2019 Mattoc, Magnum, Mastodon Pro and Expert level forks.
Manitou Part Code: 141-32668-K003 Learn More

IVA: Incremental Volume Adjust
A 5 position spacer system to tune positive air chamber volume and increase progression
M32 x 1.0 mm thread

Manitou Part Code: 141-32668-K001

Learn More

King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Fits 190x 50 mm & 200 x 50 mm McLeod rear shocks Manitou Part Code: 142-31535-K030 Learn More

King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Manitou Part Code: 142-31535-K032 Learn More

King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Manitou Part Code: 142-31535-K033 Learn More

MILO (Manitou Integrated Lock Out) kit for ABS+ damper used in 2011+ forks
Kit includes 2 position handle-bar lever, cable, cable housing, fork mounted cable stop, return spring, ABS+ damper cap and screw
Will adapt any ABS+ fork damper to remote (handlebar) lockout operation
Manitou Part Code: 141-26896

Learn More

These are only available for Pike, other applications have been superseded by the Debonair C1 (V3).

Superseded by SRAM-LYRIKPIKEDEBONAIR-AIRSHAFTUPV3

Debonair name was used in Solo Air Lyrik and Yari forks in 2018.  We call this Debonair V1.
Debonair V2 was introduced for MY 2019.  It features shafts with higher negative air volume and lower friction than previous Solo-Air air spring shafts.  Visible differences are the red flat seal-head, plastic moulded grey or black piston and removable shaft foot.
This bigger negative volume and lower friction gives you better small bump response and lets you run more air pressure for more mid stroke support.  They are a bolt-in upgrade, but only fit solo-air forks.  Debonair V2 shafts are also available in different lengths if you want to change your fork travel.  Select the correct one for your forks.

These are available for self-install or can be installed as part of a Shockcraft service. Learn More

Debonair V3 (RS calls it Debonair C1) is a new design for mid 2020 release to make bikes ride higher in the travel and use travel more easily.
It is identified by a longer red shaft foot and a red base-plate which is hollow underneath.

These are available for self-install or can be installed as part of a Shockcraft service.  Sizes are specific to each model, generation and travel of fork.

All sizes ordered in from supplier upon customer order.  Usually available approx 2 days lead-time.

V3 are no longer available for Rockshox Pike A1-A2, use RockShox DebonAir V2 Air Shaft Upgrade (SRAM)

Learn More

Self contained Lyrik/Yari Charger 2.1 RC2 damper for repair or upgrade of RockShox Lyrik B1+ & Yari A1+ 2016+ forks
Fits 35 mm Lyrik 27/29, Yari 27/29 & Pike A2 29+ forks which use the Lyrik chassis
Adjustable 4 click High Speed Compression (HSC), 19 click Low Speed Compression (LSC) and Low Speed rebound (LSR)
580 mm overall length
For up to 180 mm travel
Includes adjuster knobs & foot bolt
Top cap threads 32 x 0.5 mm
Shipping dimensions:  75 x 75 x 630 mm
Charger 2.1 is a mid 2019 update with better damping circuits, lower friction and softer compression damping than Charger 2.0

SRAM Part Code: 00.4020.170.000

These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.

Shockcraft can tune this damper for you before delivery.  This improves small bump compliance and support.  Important for hard and fast riders.

Learn More

Self contained Pike Charger 2.1 RC2 damper for repair or upgrade of RockShox Pike forks
Fits 35 mm Pike B1+ 2018+ forks
Includes adjuster knobs & foot bolt
Charger 2.1 is a mid 2019 update with better damping circuits, lower friction and softer compression damping than Charger 2.0

SRAM Part Code: 00.4020.169.005

These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.

Shockcraft can tune this damper for you before delivery.  This improves small bump compliance and support.  Important for hard and fast riders.

Learn More

Damper Upgrade Kit CHARGER2.1 RC2 for Zeb A1+ 2021 (SRAM)
Self contained charger2.1 damper for repair or upgrade from sub-par Charger R/RC versions.
Adjustable 4 click High Speed Compression (HSC), 19 click Low Speed Compression (LSC) and Low Speed rebound (LSR)
2021 Zeb A1 only.  Max 200mm travel.
Includes adjuster knobs & foot bolt.

SRAM Part Code: 00.4318.048.000

Shockcraft can tune this damper for you before delivery.  This improves compliance, support and stability.  Details here for purchase of this damper tuned & modified.

Learn More

Vorsprung Smashpot coil conversion system for DVO Onyx SC 2019+ forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Vorsprung Smashpot coil conversion system for Fox 36 forks
Fits 2015+ Fox 36 forks with M33x0.8mm top-caps
2021+ Fox 36 forks require the 20 mm top cap adapter
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Will not fit E bike forks with smaller ID stanchions and caps
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Vorsprung Smashpot coil conversion system for Fox 38 mm 2021+ forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Will not fit E bike forks with smaller ID stanchions and caps
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Vorsprung Smashpot coil conversion system for Marzocchi Z1 forks
Fits 2019+ Marzocchi Z1 forks with M33x0.8mm top-caps
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Will not fit E bike forks with smaller ID stanchions and caps
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Vorsprung Smashpot coil conversion system for Öhlins RXF36 m.1 & m.2 forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Vorsprung Smashpot coil conversion system for Öhlins RXF38 forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Vorsprung Smashpot coil conversion system for RockShox Zeb 2021+ forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Vorsprung Smashpot coil conversion system for Rockshox Lyrik and Yari forks
Fits Rockshox Lyrik and Yari, some Pike & Revelation forks with 35 mm stanchions and M32.5 x0.5mm top-caps (fine thread)
M32.5x1.0 (Coarse thread) kit for Non Boost Pike is available.
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in.
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Individual coil springs for the Vorsprung Smashpot coil conversion system
Includes heat shrink as pictured and spring isolator perch (also available separately here)
Spring rates available from 30-80 lb/in in 5 lb/in increments
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

All sizes ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More