You have no items in your shopping cart.
Available Ex NZ Supplier 2 Days
Vorsprung Luftkappe extended air piston and low volume sealhead for RockShox Zeb forks
Fits 2021-22 RockShox Zeb forks, fits 2023 Zeb if 2021-22 air shaft installed
Requires 10 mm shaft clamp to install
Can be installed as part of any Shockcraft service (book here)
Last One Left
Roll pin tool for use in installation of Luftkappe in Fox Float 34 Evol 2018+, 34 NA2 2016-17 & 36 Evol 2018+ forks
Learn MoreStarting at: US$10.29
Upgrade your Mattoc Expert to Mattoc Pro specification.
Requires the Mattoc Pro rebound shaft assembly
Compression damping requires either the Mattoc Pro MC2 compression assembly or convert your Expert compression damper with the Pro HBO Cup.
27" wheel size for up to 160 mm travel
Manitou Part Codes: 141-30996-K017 (Rebound Assembly) & 141-30996-K001 (Compression Damper Assembly) or 126-30377 (Mattoc Pro HBO Cup)
Learn MoreLast One Left
Last One Left
IVA: Incremental Volume Adjust
A 5 position spacer system to tune positive air chamber volume and increase progression
M32 x 1.0 mm thread
Manitou Part Code: 141-32668-K001
Last One Left
Backorder ex-USA
Last One Left
Last One Left
MILO (Manitou Integrated Lock Out) kit for ABS+ damper used in 2011+ forks
Kit includes 2 position handle-bar lever, cable, cable housing, fork mounted cable stop, return spring, ABS+ damper cap and screw
Will adapt any ABS+ fork damper to remote (handlebar) lockout operation
Manitou Part Code: 141-26896
Available Ex NZ Supplier 2 Days
Self contained Lyrik/Yari Charger 2.1 RC2 damper for repair or upgrade of RockShox Lyrik B1+ & Yari A1+ 2016+ forks
Fits 35 mm Lyrik 27/29, Yari 27/29 & Pike A2 29+ forks which use the Lyrik chassis
Adjustable 4 click High Speed Compression (HSC), 19 click Low Speed Compression (LSC) and Low Speed rebound (LSR)
580 mm overall length
For up to 180 mm travel
Includes adjuster knobs & foot bolt
Top cap threads 32 x 0.5 mm
Shipping dimensions: 75 x 75 x 630 mm
Charger 2.1 is a mid 2019 update with better damping circuits, lower friction and softer compression damping than Charger 2.0
SRAM Part Code: 00.4020.170.000
These dampers are ordered in from the NZ Supplier as required. Lead time is usually 2 days.
Shockcraft can tune this damper for you before delivery. This improves small bump compliance and support. Important for hard and fast riders.
Available Ex NZ Supplier 2 Days
Self contained Pike Charger 2.1 RC2 damper for repair or upgrade of RockShox Pike forks
Fits 35 mm Pike B1+ 2018+ forks
Includes adjuster knobs & foot bolt
Charger 2.1 is a mid 2019 update with better damping circuits, lower friction and softer compression damping than Charger 2.0
SRAM Part Code: 00.4020.169.005
These dampers are ordered in from the NZ Supplier as required. Lead time is usually 2 days.
Shockcraft can tune this damper for you before delivery. This improves small bump compliance and support. Important for hard and fast riders.
Available Ex NZ Supplier 2 Days
Damper Upgrade Kit CHARGER2.1 RC2 for Zeb A1+ 2021 (SRAM)
Self contained charger2.1 damper for repair or upgrade from sub-par Charger R/RC versions.
Adjustable 4 click High Speed Compression (HSC), 19 click Low Speed Compression (LSC) and Low Speed rebound (LSR)
2021 Zeb A1 only. Max 200mm travel.
Includes adjuster knobs & foot bolt.
SRAM Part Code: 00.4318.048.000
Shockcraft can tune this damper for you before delivery. This improves compliance, support and stability. Details here for purchase of this damper tuned & modified.
Learn MoreFrom: US$380.45
To: US$389.53
Vorsprung Smashpot coil conversion system for DVO Onyx SC 2019+ forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.
From: US$380.45
To: US$405.04
Vorsprung Smashpot coil conversion system for Fox 36 forks
Fits 2015+ Fox 36 forks with M33x0.8mm top-caps
2021+ Fox 36 forks require the 20 mm top cap adapter
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Will not fit E bike forks with smaller ID stanchions and caps
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.
From: US$380.45
To: US$389.53
Vorsprung Smashpot coil conversion system for Fox 38 mm 2021+ forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Will not fit E bike forks with smaller ID stanchions and caps
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.
From: US$380.45
To: US$389.53
Vorsprung Smashpot coil conversion system for Marzocchi Z1 forks
Fits 2019+ Marzocchi Z1 forks with M33x0.8mm top-caps
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Will not fit E bike forks with smaller ID stanchions and caps
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.
From: US$380.45
To: US$389.53
Vorsprung Smashpot coil conversion system for Öhlins RXF36 m.1 & m.2 forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.
From: US$380.45
To: US$389.53
Vorsprung Smashpot coil conversion system for Öhlins RXF38 forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.
From: US$380.45
To: US$389.53
Vorsprung Smashpot coil conversion system for RockShox Zeb 2021+ forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.
From: US$380.45
To: US$389.53
Vorsprung Smashpot coil conversion system for Rockshox Lyrik and Yari forks
Fits Rockshox Lyrik and Yari, some Pike & Revelation forks with 35 mm stanchions and M32.5 x0.5mm top-caps (fine thread)
M32.5x1.0 (Coarse thread) kit for Non Boost Pike is available.
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in.
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
Ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.
Individual coil springs for the Vorsprung Smashpot coil conversion system
Includes heat shrink as pictured and spring isolator perch (also available separately here)
Spring rates available from 30-80 lb/in in 5 lb/in increments
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)
All sizes ordered in from NZ supplier upon customer order. Usually available approx 2 days lead-time.