We are OPEN
Click here for updates on our current status.
 

RockShox

Parts, service and tuning for RockShox suspension and dropper posts.

Set Descending Direction

126-150 of 223

  1. Full service kit for RockShox Monarch RL (B1), R/RT/RT3 (C1) & RT3 (D1) 2014+ rear shocks

    SRAM Part Code: 11.4118.038.000 Learn More
  2. Service kit for RockShox Monarch RT3 2013 rear shocks Kit includes seals, backup rings, bushings & schrader valves SRAM Part Code: 11.4118.015.000 Learn More
  3. RockShox Monarch RT3/RT/R 2011 Service Kit (SRAM)

    NZ$94.30

    Available on backorder

    Full service kit for Monarch RT3/RT/R 2011 rear shocks

    SRAM Part Code: 11.4115.113.010 Learn More
  4. Full service kit for RockShox Monarch XX 2014-19 rear shocks

    SRAM Part Code: 11.4118.038.001 Learn More
  5. Seal kit to fit RockShox Monarch/Monarch Plus high volume air cans (has a different glide ring to the kit for the Debonair)
    SRAM Part Code: 00.4315.032.250 Learn More
  6. Seal kit to fit RockShox Monarch/Monarch Plus single layer air cans SRAM Part Code: 00.4315.032.240 Learn More
  7. This single RockShox pick tool helps you to carefully remove O-rings during service.
    Pick tool is 140 mm length.
    Made from a non-scratch composite (fibreglass reinforced nylon) material.

    SRAM Part Code: 00.4318.012.013 (for a set of 5) Learn More
  8. Rockshox Oil Height Tool (SRAM)

    NZ$115.20

    Available on backorder

    Oil level adjuster (for checking and adjusting oil level). For Reverb, Motion Control Dampers and Turnkey Dampers. Learn More
  9. RockShox Pike B1+ 2018+ Charger 2.1 Damper RC2 (SRAM)

    NZ$812.00

    Available Ex NZ Supplier 2 Days

    Self contained Pike Charger 2.1 RC2 damper for repair or upgrade of RockShox Pike forks
    Fits 35 mm Pike B1+ 2018+ forks
    Includes adjuster knobs & foot bolt
    Charger 2.1 is a mid 2019 update with better damping circuits, lower friction and softer compression damping than Charger 2.0

    SRAM Part Code: 00.4020.169.005

    These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.

    Shockcraft can tune this damper for you before delivery.  This improves small bump compliance and support.  Important for hard and fast riders.

    Learn More
  10. RockShox Pike C1+ 2023+ Charger 3 RC2 Damper (SRAM)

    NZ$757.00

    Available Ex NZ Supplier 2 Days

    Self contained Pike Charger 3 RC2 damper for repair or upgrade of RockShox Pike forks
    Fits 35 mm Pike C1+ 2023+ forks
    Includes adjuster knobs, butter cup & foot bolt
    Charger 3 is a 2023+ design which performs best with Shockcraft modifications and tuning.

    SRAM Part Code: 00.4018.063.000

    These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.

    Shockcraft can tune this damper for you before delivery.  This improves small bump compliance and support.  Important for hard and fast riders.

    Learn More
    • Out of stock

  11. Purchase a new Pike B1+ 2018+ Charger 2.1 RC2 damper with Shockcraft Matrix Tune to upgrade your RockShox 35 mm Pike forks

    Our Matrix Tune & Unharsh Modifications for these dampers are for your weight, bike geometry and riding style.  We remove harshness, increase support and compliance, while providing a lively playful feel.

    Pricing & Availability
    This product is a new RockShox Pike B1+ 2018+ Charger 2.1 Damper RC2 with modifications & tuning, which includes labour, machining, new parts, consumables and fluids

    These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.
    Damper SRAM Part Code: 00.4020.169.005

    Rockeater Tune
    We also have our Rockeater Tuned Pike Charger 2.1 RC2 dampers, info here.

    Want your existing Charger damper tuned?
    You can also send us your existing Lyrik Charger damper or fork for tuning.  We have both Matrix Tune & Rockeater Tune options. Learn More
  12. Purchase a new Pike B1+ 2018+ Charger 2.1 RC2 damper with Shockcraft Rockeater Tune to upgrade your RockShox 35 mm Pike fork

    The Rockeater Tune is a preconfigured set of modifications and internal tuning which is targeted at 70-80 kg riders who like to ride rough stuff fast without getting beaten
    They have enough range to also work great for riders from 60-90 kg
    But even outside those limits they're better than anything you'll find factory

    The Rockeater Tunes are based on our Matrix & Custom Tune series, incorporating Unharsh Modifications where needed.  But it's simpler.  There are no calculations or data needed.  We will service, install and dyno test to make sure it's running perfectly.

    As the Rockeater Tunes are a one-size-fits-all upgrade, they provide the same performance and improvements for any future owners, preserving your investment.

    Pricing & Availability
    This product is a new RockShox Pike B1+ 2018+ Charger 2.1 RC2 damper with a Rockeater Tune, which includes labour, machining, new parts, consumables and fluids

    The dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.
    Damper SRAM Part Code: 00.4020.169.005

    Matrix Tune
    If you want the full experience of a Matrix Tuned RockShox Pike B1+ 2018+ Charger 2.1 RC2 damper we still have these too.  Information and pricing is here.

    Want your existing Charger damper tuned?
    You can also send us your existing Lyrik Charger damper or fork for tuning.  We have both Matrix Tune & Rockeater Tune options. Learn More
  13. Replacement and updated air seal head assembly for RS Pike A1-A2 and Pike Boost from 2014-2017
    Solo Air forks only
    SRAM Part Code: 11.4018.037.000

    Learn More
  14. Service kit for 35 mm RockShox Pike A1/A2 forks 2014-2017 with Solo Air spring.
    Will not fit first generation 32 mm Pike forks
    SRAM Part Code: 11.4018.027.003

    Learn More
  15. Rockshox Pike Service Kit Dual Position Air (SRAM)

    NZ$128.25

    Available on backorder

    Service kit for 35 mm RockShox Pike A1/A2 forks 2014-2017 with Dual Position air spring. Will not fit first generation 32 mm Pike forks. SRAM Part Code: 00.4315.032.618 Learn More
  16. Service, tuning & upgrade pricing for RockShox Pike or Lyrik forks
    Includes labour, consumables and fluids, with optional wiper seals
    Excludes repairs & repair parts

    For a full fork service select Complicated Fork Service for the Solo Air, Super Complicated for the Dual Position Air (DPA)
    Lower leg & air spring only or damper only service also available

    See Related Products for tuning options Learn More
  17. Application: 2014-18 RockShox 35 mm Pike/Lyrik/Boxxer forks with Charger RC or RCT3 dampers.

    PDF showing contents of kit is available here Learn More
  18. Application: 2018+ RockShox 35 mm Pike/Lyrik/Boxxer forks with Charger 2 or 2.1 RC, Charger RCT3 or RC2 dampers.
    Includes o-ring upgrade to replace the cup seal that leaks out the top knobs.

    PDF showing contents of kit is available here Learn More
  19. Purchase a new Pike C1+, Lyrik D1+, Zeb A1+ & Boxxer D1 Charger 3 RC2 damper with Shockcraft Rockeater Tune to upgrade your RockShox Pike, Lyrik, Zeb or Boxxer.

    The Rockeater Tune is a preconfigured set of modifications and internal tuning which is targeted at 70-80 kg riders who like to ride rough stuff fast without getting beaten
    They have enough range to also work great for riders from 60-90 kg
    But even outside those limits they're better than anything you'll find factory

    The Rockeater Tunes are based on our Matrix & Custom Tune series, incorporating Unharsh & other Modifications where needed.  But it's simpler.  There are no calculations or data needed.  We will service, install and dyno test to make sure it's running perfectly.

    As the Rockeater Tunes are a one-size-fits-all upgrade, they provide the same performance and improvements for any future owners, preserving your investment.

    Pricing & Availability
    This product is a new RockShox Pike C1+, Lyrik D1+, Zeb A1+, Boxxer D1+ Charger 3 RC2 damper with a Rockeater Tune, which includes labour, machining, new parts, consumables and fluids

    The dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.
    Pike Damper SRAM Part Code: 00.4318.063.000
    Lyrik Damper SRAM Part Code: 00.4318.063.001
    Zeb Damper SRAM Part Code: 00.4318.063.002
    Boxxer Damper SRAM Part Code: 00.4318.063.009

    Want your existing Charger damper tuned?
    You can also send us your existing Lyrik Charger damper or fork for tuning.  We have both Matrix Tune & Rockeater Tune options.


    Learn More
  20. RockShox Reba 2009 Service Kit (SRAM)

    NZ$60.40

    No Longer Available

    2009 Rockshox Reba service kit
    Dual Air
    Motion Control

    Includes compression damper seals, dual air seals and bumpers, lower air seal-head, shaft bolt and valve cores
    Kit does not contain wiper seals
    SRAM Part Code: 11.4015.320.000

    Learn More
    • Out of stock

  21. RockShox Rebound Adjuster Lyrik RC Knob Only (SRAM)

    NZ$35.00

    Please contact us if showing out of stock

    Rebound knob only for RockShox Lyrik RC, Pike and BoXXer.

    SRAM Part Code: 11.4015.404.028 Learn More
    • Out of stock

  22. Rockshox Recon Gold service kit
    Contains wiper seals, foam rings, assortment of orings, crush washers and crush washer retainers
    SRAM Part Code: 00.4315.032.290

    Learn More
  23. RockShox Recon Gold Service Kit (SRAM)

    NZ$37.10

    Available on backorder

    Rockshox Recon Gold Solo Air service kit
    Contains wiper seals, foam rings, assortment of orings, crush washers and crush washer retainers
    SRAM Part Code: 00.4315.032.040

    Learn More
  24. Rockshox Recon RL Boost Solo Air A1 Service Kit 200H/1 YR (SRAM) Learn More
  25. Fits RockShox Recon Silver (steel stanchions) with turnkey compression damper Parts from this kit will also fit RockShox Tora & XC32 with steel stanchions & turnkey damper SRAM Part Code: 00.4315.032.020 Learn More

Set Descending Direction

126-150 of 223