30.9 mm diameter & 185 mm travel version of the 2022 Manitou Jack Dropper Post

Focus on the ride, allow the Jack to hold your saddle exactly where you set it!

The 2022 Manitou Jack dropper post is available in three drop options – 185 mm, 160 mm, and 80 mm – for improved handling when you need it.
Available in 30.9 and 31.6 mm diameters, the Jack includes a Manitou under bar lever which features a cartridge bearing for smooth, precise operation.
To further the smooth operation and setup on the 185 mm and 160 mm post the included 1.1 mm cable with Manitou specific cable head negates the use of the cable clamp, allowing all the cable tension adjustment to be completed on the lever side.
80 mm post use a standard derailleur cable for its lever side adjustments.

Note: photos are of a 31.6 mm/160 mm 2022 Manitou Jack dropper post

1 only available at this special price
Learn More

Focus on the ride, allow the Jack to hold your saddle exactly where you set it!

The 2022 Manitou Jack dropper post is available in three drop options – 185 mm, 160 mm, and 80 mm – for improved handling when you need it.
Available in 30.9 and 31.6 mm diameters, the Jack includes a Manitou under bar lever which features a cartridge bearing for smooth, precise operation.
To further the smooth operation and setup on the 185 mm and 160 mm post the included 1.1 mm cable with Manitou specific cable head negates the use of the cable clamp, allowing all the cable tension adjustment to be completed on the lever side.
80 mm post use a standard derailleur cable for its lever side adjustments. Learn More

Actuator base for Manitou Jack dropper posts
Fits pre-2022 Manitou Jack
Threads into base of post and accepts cable

Manitou Part Code: 141-33419-K001

Learn More

Manitou Jack dropper post collar and bushing kit
For spares or repair of pre-2022 Manitou Jack dropper posts

Manitou Part Code:  141-35749

Learn More

Replacement actuator for Manitou Jack dropper post
Above-bar trigger
Fits pre-2022 Manitou Jack

Manitou Part Code: 141-33419-K001 Learn More

Cable bar-end and grub screw used to in Jack Revive and other posts.
Diameter 5mm, length 9.5mm.
Fits normal shifter wire.

Manitou Part Code: BARRNT

Learn More

ACE & DEUCE remotes from Manitou for control of fork, shock & dropper posts
DEUCE is the suspension lockout remote lever for fork and/or rear shock
ACE is the underbar remote for dropper posts
Levers are stackable  and can be built into the configuration that makes the most sense for the individual rider
ACE can be built above or below the DEUCE or can be used standalone
To minimise weight the levers use 3 mm housing and 0.9 mm cable
Also compatible with standard 4 mm housing and 1.2 mm cable

Manitou Part Code: 193-41336-A001 Learn More

ACE underbar remote from Manitou for control of dropper post
Stackable with DEUCE remote (purchase separately) for remote lockout of forks and/or shocks
ACE can be built above or below the DEUCE or either can be used standalone
To minimise weight the levers use 3 mm housing and 0.9 mm cable
Also compatible with standard 4 mm housing and 1.2 mm cable

Manitou Part Code: 193-41336-A101 Learn More

DEUCE remote from Manitou for suspension lockout of fork and/or shock
Stackable with ACE remote (purchased separately) for dropper posts
DEUCE can be built above or below the ACE or either can be used standalone
To minimise weight the levers use 3 mm housing and 0.9 mm cable
Also compatible with standard 4 mm housing and 1.2 mm cable

Manitou Part Code: 193-41336-A201 Learn More