WE ARE OPEN
Click here for updates on our current status.
 

Seals & Rebuild Kits

Set Descending Direction

1-25 of 78

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. 1/2" x 3/4" x 1/4" U Cup Non-Energised Oil Seal
    Polyurethane

    Shockcraft Part Code:  S-UC-0.5X0.75X0.25IN-POLY Learn More
  2. 1/2" x 7/8" x 1/4" Lip Seal Spring Energised
    Nitrile Rubber

    Shockcraft Part Code:  S-LSE-0.5X0.875X0.25IN-NBR Learn More
  3. 1 1/8" x 1.339 x 0.107 AN Wiper
    Fits vintage Manitou 3,4 & EFC forks.
    Fits several X-fusion & Specialized air shocks. Learn More
  4. Shockcraft's internal seal kit for 28.6 mm Manitou SX & Mars forks
    Fits forks 2000-2003.

    Shockcraft Part Code: KSMAN286A Learn More
  5. Shockcraft's internal seal kit for 28.6 mm Manitou Axel forks Learn More
  6. Shockcraft's internal seal kit for 30 mm Manitou Black & Minute forks Learn More
  7. Shockcraft's internal seal kit for 30 mm Manitou Xvert forks
    Fits 2000-2001 Xvert forks

    Shockcraft Part Code:  KSMAN30AX Learn More
  8. Shockcraft's internal seal kit for 30 mm Manitou Splice forks Learn More
  9. Shockcraft's internal seal kit for 32 mm Manitou Sherman, Nixon Elite & Minute forks Learn More
  10. Shockcraft's internal seal kit for 32 mm Manitou Sherman, Nixon Elite & Minute forks This kit contains additional orings for the volume adjuster in SPV forks. Learn More
  11. Fits 32 mm stanchioned Manitou forks
    Flangless type for 32 x 42 mm pocket
    Require a seal driver to install

    Kit includes 2 low friction SKFseals, 2 foam rings and Slickoleum grease
    Special compound for low friction & extreme low temperature performance

    Would suit; R7, Machete, Circus, JUNIT, Marvel, Match, Minute
    Also fit older 32 mm forks - Nixon & Shermans

    Manitou Part Code: 141-38117-K016

    This kit supersedes 85-5293
    Learn More
  12. Shockcraft's internal seal kit for 32 mm Manitou Stance & Kingpin forks Learn More
  13. T-section seal & two backup rings
    Fits 32mm fork air pistons with TS Air or ISO Air pistons.
    Approx 28mm stanchion ID.

    Manitou Part Code: 141-28131-K022

    Learn More
  14. Minute/Tower Pro MARS air piston
    27 mm OD, 18.5 mm tall
    M6 threaded puller hole on top
    Blue anodised
    Manitou Part Code: 141-30416-K023
    Replacement Seal: 141-28131-K023
    Supersedes 141-25698

    Learn More
  15. Kit includes 2 Trelleborg wiper seals and 2 inner oil seals
    Fits 36 mm stanchioned Manitou Dorado forks from 2009 to 2020
    Also available as part of the Dorado Fork Service Kit

    Manitou Part Code: 141-25239

    Learn More
  16. Full seal and o-ring kit to overhaul Dorado forks from 2009 to 2021 (36 mm) Manitou Part Code: 141-25995 Learn More
  17. Kit includes 2 Trelleborg flangeless wiper seals, 2 foam rings and 2 wire clips.
    Fits 37 mm stanchioned Manitou Dorado 2022 and Mezzer forks.

    Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals.
    A seal press tool is not essential for installation of the flanged seals but it does make the job easier.


    Manitou Part Code: 141-38380-K019 Learn More
  18. Dorado MRD Upgrade Kit (Manitou)

    US$313.06

    Special Order ex-USA

    Manitou Racing Development (MRD) Upgrade kit.
    Fits Dorado 2009-2019
    Includes Dorado Infinite Rate Tune (IRT) air spring upgrade kit, Trail Side Relief bleeder caps
    & high performance MRD wiper seals

    Manitou Part Code: 141-32409-K001

    Learn More
  19. Full configurable service & upgrade kit containing fork seal kit, fork oil, bushing lubricant, grease, tools and upgrades
    Fits all Manitou 32 mm forks from 2007-19 including Minute, Marvel, Circus (but not Circus Pro), Machete, Drake, Tower etc
    TPC, SPV, ABS+, Lockout, Coil spring, TS Air, ISO Air etc

    See Related Products for details on components of this service kit Learn More
  20. Fork service kit containing fork seal kit, fork oil, grease and oil syringe.

    Grease forks (2000-2002) have "micro-lube "grease ports on the back of the legs Learn More
  21. Fork service kit containing fork seal kit, fork oil, bushing lubricant, Slickoleum assembly grease and oil syringe.

    Semi-Bath forks (2003 onwards) have 16cc splash oil lubrication in each lower leg. Learn More
  22. Fork service kit containing fork seal kit, fork oil, grease, oil syringe and optional seal press tool.

    Grease forks (2000-2002) have "micro-lube "grease ports on the back of the legs. Learn More
  23. Fork service kit containing fork seal kit, fork oil, bushing lubricant, Slickoleum assembly grease, oil syringe and optional seal press tool.

    Semi-Bath forks (2003 onwards) have 16cc splash oil lubrication in each lower leg. Learn More
  24. Fork Service Kit for Manitou 32 mm Forks

    From: US$1.22

    To: US$425.94

    Fork service kit containing fork seal kit, fork oil, bushing lubricant, Slickoleum assembly grease and oil syringe.

    Fits all Manitou 32mm forks from the 2003 Sherman to current.  Including Minute, Marvel, Nixon, Stance, Circus (but not Circus Pro), Machete, Drake, Tower etc. Learn More
  25. Fork Service Kit for Manitou 34 mm Forks

    From: US$2.75

    To: US$432.87

    Fork service kit containing fork seal kit, internal seal kit, fork oil, bushing lubricant, Slickoleum assembly grease and oil syringe Learn More

Set Descending Direction

1-25 of 78

Page:
  1. 1
  2. 2
  3. 3
  4. 4