For 8 to 25 mm ID cartridge bearings. Learn More

10 ml Oil Syringe - for fork filling & brake bleeding Learn More

Shaft clamp tool for use in installation of Luftkappe & Secus

Learn More

Heavy duty tool for installing and removing all eight-notch bottom bracket cups, including Monocrome SF41 & SF46, Shimano, ISIS Drive, ISIS Overdrive
Also fits Shimano crankset lockrings
Fits a 32 mm hex socket so a torque wrench can be used

Learn More

3 ml Oil Syringe - for fork filling & brake bleeding Learn More

30 ml Oil Syringe - for fork filling & brake bleeding Learn More

Shockcraft designed Fork Mounting System for 3D printing
Fits all forks with straight or tapered 1.125" (28.6mm) steerer tubes.  Does not fit Giant 1.25" (31.8mm) forks
Product is one pair of 3D STL geometry files for use with 3D printers.
Mounts with 3x 8 gauge (4.2mm) 50mm CSK screws from the front or 12 gauge (5.6mm) self tapping screws from the back.

Shockcraft Part Code: SC-DD-FORKMOUNT

Learn More

Shockcraft designed Dyno Probe Mount for 3D printing
Fits Roehrig or CTW dyno with 31.8mm stanchion and 19mm probe casing.
Product is one 3D STL geometry file for use with 3D printers.
Mounts with o-rings for fast and easy repositioning

Shockcraft Part Code: SC-DD-PROBEMOUNT-31.8X19

Learn More

Shockcraft designed Dyno Probe Mount for 3D printing
Fits Laba 7 dyno with 40mm stanchion and 25mm probe casing.
Product is one 3D STL geometry file for use with 3D printers.
Mounts with o-rings for fast and easy repositioniong

Shockcraft Part Code: SC-DD-PROBEMOUNT-40X25

Learn More

Shockcraft designed & manufactured fork mounting clips
Fits all forks with straight or tapered 1.125" (28.6mm) steerer tubes
Does not fit Giant 1.25" (31.8 mm) forks
Product is one set of 3D printed clips in black
Mounts with 3 x 8 gauge (4.2 mm) 50 mm CSK screws from the front or 12 gauge (5.6 mm) self tapping screws from the back (Screws not included in set)

Shockcraft Part Code: SC-FORKMOUNT-BLK Learn More

Shockcraft designed & Manufactured Dyno Probe Mounting Clip
Fits Roehrig & CTW dyno with 31.8mm (1.25") stanchion and 19mm (3/4") probe casing.
Product is one 3D printed clip in green.
Mounts with o-rings for fast and easy repositioniong

Shockcraft Part Code: SC-PROBEMOUNT-31.8X19

Learn More

Shockcraft designed & Manufactured Dyno Probe Mounting Clip
Fits Laba 7 dyno with 40mm stanchion and 25mm probe casing.
Product is one 3D printed clip in green.
Mounts with o-rings for fast and easy repositioniong

Shockcraft Part Code: SC-PROBEMOUNT-40X25

Learn More

60 ml Oil Syringe - for fork filling & brake bleeding Learn More

To fit M2 (mm) grub screws Learn More

To fit M2.5 (mm) grub screws Learn More

Heavy duty tool for installing and removing all eight-notch bottom bracket cups, including Monocrome SF41 & SF46, Shimano, ISIS Drive, ISIS Overdrive

Learn More

This is a complex spring rate calculator to determine front and rear spring rates for Trail and Enduro MTB.

Enter rider weight, bike weight and unsprung weights as well as bike geometry numbers to get the most accurate starting point for bike setup.

Learn More

This is a complex frequency based spring rate calculator to determine rear spring rates for Trail and Enduro MTB.

Enter rider weight, bike weight and unsprung weights as well as bike geometry numbers to get the most accurate starting point for bike setup.

Learn More

This is a simple spring rate calculator to ball-park bike setup and provide a front spring rate.

It makes several assumptions to reduce the user input down to just one variable (rider weight).  If you want a more accurate calculator and/or one that calculates rear shock spring rate then use one of our Advanced Bike Spring Rate Calculators here.

Learn More

Feeler gauge tool for brake setup
Accurately sets caliper alignment to rotor
Folds away for storage

Hayes Part Code: 98-23972

Learn More

Kit for bleeding charger 1 dampers in 2014-2017 RockShox, Pike, Lyrik & Boxxer forks

Learn More

A calculator to find the spring rate (in lb/in), maximum travel (mm), force at bottom-out and material stress (MPa) of an unindentified spring.

Enter wire diameter (mm), diameter inside the coils (mm), the number of coils that are free to move and the travel required.

You must purchase a voucher code to use this calculator.  The voucher code will be emailed to you after purchase and can only be used once.  Simply click add to cart and proceed through the checkout process.

Also available: Simplified Coil Spring Calculator - find spring rate (in lb/in) of an unindentified spring.

Learn More

A calculator to find the spring rate (in lb/in) of an unindentified spring.

Enter wire diameter (mm), diameter inside the coils (mm) and the number of coils that are free to move.

You must purchase a voucher code to use this calculator.  The voucher code will be emailed to you after purchase and can only be used once.  Simply click add to cart and proceed through the checkout process.

Also available: Detailed Coil Spring Calculator - find spring rate (in lb/in), maximum travel (mm), force at bottom-out and material stress (MPa) of an unindentified spring.

Learn More

Tool for easy removal of bearing cups, without damage, from Fox Float DPS & DPX2 rear shocks fitted with first generation 30 x 8 mm ball bearing cups
No more screwdrivers! Learn More

Cartridge damper bleeding tool kit
For bleeding cartridge fork and rear shock dampers.  Including Mezzer, Dorado, Mara Pro etc.
Can also fit other brands mineral oil brakes, dropper posts etc.
Contains bleed syringes, M5 point fitting, M5 o-ring fittings, M8 o-ring fittings, tube and a torx driver.
For use with mineral oil only (no DOT fluid).
Packaged in a clip top plastic tub.

Manitou Part Code 141-30694-K020

Learn More