Clamp block for Manitou Dorado 36 mm forks
4 holes, 8 mm, 10 mm, 22.23 mm & 26.50 diameter

Manitou Part Code: 172-25077 Learn More

Fork and shock shaft clamp block
Etched part code:  172-31242
Sizes 16.3, 14, 12.6, 12, 10 & 8mm
For most Manitou forks and shocks

Manitou Part Code:  172-31464 Learn More

Clamp block for servicing Manitou Dorado 2009+ forks
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
5 clamp sizes - 8 to 26.5 mm

Shockcraft Part Code:  SC-CLAMP-MAN-DORADO-V1 Learn More

Clamp block for servicing Manitou single crown fork dampers
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
5 clamp sizes - 8 to 22.2 mm

Shockcraft Part Code:  SC-CLAMP-MAN-SC-V1 Learn More

Cartridge damper bleeding tool kit
For bleeding cartridge fork and rear shock dampers.  Including Mezzer, Dorado, Mara Pro etc.
Can also fit other brands mineral oil brakes, dropper posts etc.
Contains bleed syringes, M5 point fitting, M5 o-ring fittings, M8 o-ring fittings, tube and a torx driver.
For use with mineral oil only (no DOT fluid).
Packaged in a clip top plastic tub.

Manitou Part Code 141-30694-K020

Learn More

Tool for installing and removing captive bolt retainer on Manitou Hexlock SL equipped forks
Fits 1/4" driver

Manitou Part Code: 141-33397 Learn More

Keychain tool for rear shock service Manitou Part Code: 83-2694 Learn More

Manitou SPV Valve Stem Kit by Shockcraft
Replaces Manitou 83-2233 SPV Shock & Fork valve stems.
M7x0.75mm thread, fits with a 5mm hex key,

Shockcraft Part Code:  SC-SPV-M7-VALVE-KIT Learn More

Specialty three piece tool kit for servicing all Manitou 34 and 37 mm forks

Manitou Part Code: 172-31133 Learn More

Custom 8 mm deep socket to fit compression rod in Manitou Mattoc/Magnum 2015 & Later forks Chrome Vanadium 1/4'' drive fitting 49 mm length Learn More

Five-sided tool for removal of damper plugs in Swinger X4 & ISX rear shocks New Old Stock (NOS) Manitou Part Code: 83-3236 Learn More

Manitou Part Code: 142-37512-K037 Learn More

Tool for pressing wiper seals into 30 mm stanchioned forks
Manitou Part Code: 172-31121

Learn More

Double ended tool for pressing wiper seals into 32 or 34 mm stanchioned forks
Works with both flanged and flangeless wiper seals
Designed & tested to work with SKF flangeless seals
Keeps seals straight and sets depth flush with top of fork casting in one hit
Prevents damage to seals and forks
Manufactured by Real World Cycling (RWC) Learn More

Tool for pressing wiper seals into 32 mm stanchioned forks Manitou Part Code: 172-31122 Learn More

Manitou dust wiper seal press for 34 mm and 37 mm stanchioned forks
Compatible with Manitou Mattoc, Mastodon, Mezzer, Dorado and Circus Pro forks

Manitou Part Code: 172-37540-K002 Learn More

Tool for pressing wiper seals into 34 mm stanchioned forks Manitou Part Code: 172-31123 Learn More

Manitou dust wiper seal press for 2009-2020 Dorado with 36 mm stanchions
Double ended to press oil seals and external wipers

Manitou Part Code: 172-29862 Learn More

0 to 300 psi Manitou Part Code: 85-4162 Learn More