Can be trimmed down in length to replace the lower sliding bushing in Reverb seat-posts Learn More

Cane Creek Part Code: BAE0050 Learn More

Motorex 2.5 wt fork oil - 15 cSt @ 40°C

Available in 250 ml or 1 L bottles
Also available at a lower price in 1 & 4 litre refilled bottles

Learn More

Motorex 7.5 wt fork oil - 35 cSt @ 40°C

Available in 250 ml or 1 L bottles
Also available at a lower price in 1 & 4 litre refilled bottles

Learn More

Fits X-Fusion Hilo 100 mm seatposts with 22 mm shaft X-Fusion Part Code: 42-HILOSEAL-101 Learn More

Fits X-Fusion Hilo 100/125 mm seatposts with 25 mm shaft X-Fusion Part Code: 42-HILOSEAL-201 Learn More

10 cSt Motorex Corex Hydraulic Oil
2/3 the viscosity (thickness) of 2.5 wt fork oil
For use when low damping or faster action are required
Correct viscosity for Rockshox Reverb dropper posts & Shimano brakes.

Learn More

Jack dropper post actuator base
Threads into base of post and accepts cable.

Manitou P/N: 141-33419-K001

Learn More

Replacement cartridge for Jack Dropper Post (Manitou)
125mm version
Cartridge is servicable and rebuildable

Hayes Part Code:  141-35748-K002 Learn More

Replacement cartridge for Jack Dropper Post (Manitou)
150mm version
Cartridge is servicable and rebuildable

Hayes Part Code: 141-35748-K002 Learn More

Jack collar and bushing kit (Manitou)
For spares or repair of Jack dropper seat posts.

Manitou Part Code:  141-35749

Learn More

O-ring black nitrile rubber - sold individually.
Appearance is matte black
Standard compound for static and dynamic seals
N90 code is a harder grade
Measurements are internal diameter and cross section width.

Learn More

O-ring Polyurethane - sold individually.
Appearance is clear to light brown
Tougher than black nitrile rubber
90 is a harder compound than 70
Measurements are internal diameter and cross section width. Learn More

Quad-ring black nitrile rubber - sold individually.
Appearance is matte black
Standard compound for static and dynamic seals
Measurements are internal diameter and cross section width. Learn More

Full mineral oil bleed kit For all RockShox Reverb dropper posts Kit includes 120 ml hydraulic fluid, two syringes and tubes with M5 fittings SRAM Part Code: 00.4318.007.001 Learn More

Fits Reverb and X-Lock hoses at lever end.

SRAM Part Code: 11.6815.022.030 Learn More

Fits RockShox Reverb & Reverb Stealth B1 seatposts
Includes foam ring, inner sealhead bushing & o-rings
SRAM Part Code: 11.6818.031.000 Learn More

Fits RockShox Reverb A1 seat posts (not Reverb Stealth)
SRAM Part Code: 11.6818.003.010 Learn More

Fits Reverb A2 dropper posts
Non stealth models with external hose.
Includes new seal heads, bushings, internal seals and  upgraded IFP

SRAM Part Code: 11.6818.031.005

Learn More

Kit with seals, oil, grease, tools & lower bushing to service RockShox Reverb and Reverb Stealth seat posts

Internal seal kit includes main o-rings that need replaced during a service
Alternative to obsolete SRAM kit 11.6815.031.000
A1 Reverb uses 9.1 x 3.5 mm o-ring for main shaft seal
A2 & B1 replace 10x15 x4 mm cup seal on main shaft with 10 x 3 mm o-ring (included in kit) to reduce air intrusion

Lower bushing is either genuine RockShox glacier type or IGUS, which needs trimmed to fit

Click on related products below for detail on tools

Learn More

Rockshox Reverb & Stealth lower bushing.
Single bushing with o-ring to fit Reverb Reverb Stealth dropper posts
Installs into cartridge end-cap for service or repair.

SRAM Part Code: 11.6818.035.007 Learn More

Rockshox Reverb & Stealth cartridge end-cap.
Coarse thread version for A1 and A2 models.
Fits RockShox Reverb & Reverb Stealth up to 2016 (A1 & A2)
Includes inner and outer seals with lower bushing.

SRAM Part Code: 11.6818.017.020 Learn More

Connectamajig collar
Fits remotes for Reverb & Reverb Stealth dropper posts
SRAM Part Code: 11.4318.005.000 Learn More

Fits RockShox Reverb Stealth seat posts
Includes hose with crimped on Connectamajig fitting and barb fitting for the lever end
Hose length 2000 mm

For non Connectamajig posts use 11.6815.025.030

SRAM Part Code: 11.6815.025.030 Learn More

Fits all Reverb & Reverb Stealth dropper posts
SRAM Part Code: 11.6815.022.010 Learn More