We're excited to announce the launch of Biken Distribution.
Biken has grown from all the brands and products at Shockcraft that aren't strictly suspension, and includes a special focus on quality kids' MTB products.  Visit Biken
 

Shocks

Here at Shockcraft we service and support virtually all rear shocks regardless of age, type and model.  We can supply service kits and parts for all mainstream brands and most minor.  We offer tuning and upgrades for the most popular suspension platforms.

Set Descending Direction

1-25 of 176

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. 1 1/8" x 1.339 x 0.107 AN Wiper
    Fits vintage Manitou 3,4 & EFC forks.
    Fits several X-fusion & Specialized air shocks. Learn More
  2. Straight replacement for shock eyelets in Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide. 

    We can fit this into your shock and offer a full shock hardware manufacturing/fitting service.

    Learn More
  3. 1/2" IGUS Eyelet Bushing

    US$10.55

    In stock

    Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide.  Available with shock eyelet pressing or complete custom fitted shock hardware.

    Learn More
  4. Flanged bushings for shock eyelets
    Installed as a pair with o-rings (not included) for new fitment or repair
    Straight replacement for similar bushings from Fox, Trelleborg etc

    Note these have a tighter ID than Fox & IGUS
    They can be reamed to size after installation if they are too tight

    Learn More
  5. Fox Flanged bushings for shock eyelets
    Installed as a pair with o-rings (not included) for repair
    Straight replacement for genuine Fox flanged bushings provided the pin isn't worn

    If you have a worn pin causing a knock, then use the green versions which have a tighter ID

    Learn More
  6. Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets.
    1/2" ID x 1/2" Wide.  
    Pre-tensioned bushing to accomodate small variations in eyelet diameter and shape without binding or play Available with shock eyelet pressing or complete custom shock hardware

    Learn More
  7. 10 mm IGUS Eyelet Bushing

    US$10.55

    In stock

    Harder wearing upgrade for
    older RockShox
    Rear Shock Eyelets
    10 mm x 12 mm x 12 mm
    Available with shock eyelet pressing Learn More
  8. Straight replacement for Manitou, X-Fusion & some RockShox Rear Shock Eyelets 12 mm x 14 mm x 12 mm Available with shock eyelet pressing Learn More
  9. 12 mm IGUS Eyelet Bushing

    US$10.55

    In stock

    Harder wearing upgrade for Manitou, X-Fusion & some RockShox Rear Shock Eyelets 12 mm x 14 mm x 12 mm Available with shock eyelet pressing Learn More
  10. ID: 12 mm, OD: 14 mm, W: 12.5 mm Manitou Part Code: 85-6105 Learn More
  11. Straight replacement for Manitou Wide (14 mm) Rear Shock Eyelets 12 mm x 14 mm x 14 mm Available with shock eyelet pressing Learn More
  12. Harder wearing upgrade for Manitou, X-Fusion & some RockShox Rear Shock Eyelets 12 mm x 14 mm x 12 mm Pre-tensioned bushing to accomodate small variations in eyelet diameter and shape without binding or play Available with shock eyelet pressing Learn More
  13. 2 piece shock reducers to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)

    Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install 3 piece hardware is suitable for these shocks 

    Learn More
  14. Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later) 21.8 mm total width 6 mm bolt hole Two piece top-hat design Manitou Part Code: 142-27124-K003 Learn More
  15. Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later)
    21.8 mm total width 8 mm bolt hole
    Two piece top-hat design
    Manitou Part Code: 142-27125-K003 Learn More
  16. Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later) 22.2 mm total width 6 mm bolt hole Two piece top-hat design Manitou Part Code: 142-27124-K005 Learn More
  17. Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later) 30 mm total width 8 mm bolt hole Two piece top-hat design Manitou Part Code: 142-27125-K024 Learn More
  18. Premium sealed shock hardware for bikes that like to get wet and muddy. 21.9 mm length to fit 1/2" shock eyelets. Heavy duty stainless steel wear surfaces, IGUS pre-tensioned bushing for maximum life and Shockcraft's own sealing collars to keep contaminants out. Learn More
  19. Shock pin and collars to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)

    Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install hardware is suitable for these shocks

    Learn More
  20. Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later) 40 mm total width 8 mm bolt hole Three piece pin and collar design Manitou Part Code: 142-27125-K047 Learn More
  21. 5th Element Spherical Bearing (5th Element)

    US$11.26

    Out of stock - contact us for other solutions

    Application: 5th Element Shock Mounts ID: 3/8" (9.5 mm), OD: 16 mm, Body W: 7 mm, Ball W: 5/16" (7.9 mm) Learn More
  22. Fox Float Fluid 5cc "Pillow Pack" Learn More
    • Out of stock

  23. Normally you book your fork, shock or dropper post for a Shockcraft service and send it when you can.  We service parts in the order that they arrive.  In busy times this can mean up to a month with a bike in pieces and no riding.

    With our new Book Now, Send Later option you can keep your place in the queue and we tell you when we need your fork, shock or dropper.  Use our Carrier Kereru (Pigeon) Pickup service and we'll organise courier collection.  This can bypass much of the downtime. Learn More
  24. Fox Flanged bushings (oversize) for shock eyelets
    Installed as a pair with o-rings (not included) for repair
    Thinner wall replacement for genuine Fox flanged bushings which are overly tight with oversize pin or undersize hole. Learn More
  25. Cane Creek DB Coil Rear Shock for Giant Reign
    Trunnion Mount top (54 mm wide, M10 x 1.0 threaded holes)
    Open lower eyelet (no bushing) to fit Giant main pivot
    205 mm eye to eye length 62.5 mm stroke
    9.5 mm shaft
    Fits Giant Reign 2018+
    Spring included - select your rate (use our spring calculator to work out spring rate)

    This product is special order Learn More

Set Descending Direction

1-25 of 176

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5