Manitou's legendary 26" single-crown jump fork
Other applications include trail and cargo bikes
Travel 100 mm (internally adjustable to 80 mm)
20 x 110 mm Hex axle
ACT coil spring with air preload system
ABS+ damper with Jump Stack tune
1 1/8" straight steerer
Gloss Black

The Manitou Circus has set the benchmark for the everyday riders' jump session requirements, and delivered podium results at pro-level competitions for almost a decade.

The Circus has a firm coil spring with air preload and a firm valved ABS+ compression damper to take the impact out of hard landings.  The 20 mm axle and 26" wheel size keeps the front end stiff and strong. The firm spring and damping is also ideally suited to longtail cargo bikes, where more of the rider's weight is on the fork.  This fork can also be revalved and tuned to become an excellent trail fork for multiple use bikes.

Available for order now.  If not in stock please contact us and we can advise ETA.

Other available options for Manitou Circus Expert:
1.5" tapered steerer
Travel 130 mm  (internally adjustable to 120-140)
Gloss White Learn More

Single crown air spring fork for jump and slopestyle
This fork won the 2019 Fox US Open Clif Slopestyle under GT's David Leib
Travel 100 mm (internally adjustable to 80 mm) or 130 mm (internally adjustable 100-140 mm)
15 x 100 mm Hexlock SL tooled axle
Dorado Air spring tuned for jumping
IVA Incremental Volume Air spacer system
ABS+ damper with Jump Stack tune & hydraulic bottom out (HBO)
1.5" tapered aluminium steerer
Matte Black

Circus has set the benchmark for the everyday riders' jump session requirements, and delivered podium results at pro-level competitions for almost a decade.  The Circus Pro adds a lighter and stiffer 34 mm air spring chassis from the Mattoc to the Circus range.

The Circus Pro is Manitou's new Dirt Jump & Slope Style fork.  Based on the 34 mm Mattoc chassis it is strong, stiff and light, with a fully tunable air spring and ABS+ compression damper to take the impact out of hard landings.  The 15 mm axle and 26" wheel size keeps the front end stiff and strong. This fork can also be revalved and tuned to become an excellent trail fork for multiple use bikes.

Available for order now.  If not in stock please contact us and we can advise ETA. Learn More

Manitou's legendary 26" single-crown jump fork
Travel 100 mm (internally adjustable to 80 mm) or 130 mm (internally adjustable to 120-140 mm)
20 x 110 mm Hex axle
ACT coil spring with air preload system
ABS+ damper with Jump Stack tune
1 1/8" straight or 1.5" tapered steerer
Gloss Black or Gloss White

The Manitou Circus has set the benchmark for the everyday riders' jump session requirements, and delivered podium results at pro-level competitions for almost a decade.

The Circus has a firm coil spring with air preload and a firm valved ABS+ compression damper to take the impact out of hard landings.  The 20 mm axle and 26" wheel size keeps the front end stiff and strong. This fork can also be revalved and tuned to become an excellent trail fork for multiple use bikes.

Available for order now.  If not in stock please contact us and we can advise ETA.

Photos show 1 1/8" straight steerer version.  Also available in 1.5" tapered steerer. Learn More

Air Conversion Kit for Manitou Circus Expert forks.
Converts Circus forks from 2011 to current from coil to air spring
Ideal for lighter riders.
Replaces coil spring and compression rod with air piston and shaft
Aluminium stanchion forks only (will not fit Comp or Sport forks)

Shockcraft Part Code:  SC-CIRCUS-AIR-KIT Learn More

Shims, balls & springs for DIY tuning of Manitou ABS+ compression dampers
ABS+ tuning guide can be found here
Manitou Part Code: 141-32511-K001

Learn More

Fork service kit containing fork seal kit, internal seal kit, fork oil, bushing lubricant, Slickoleum assembly grease and oil syringe Learn More

Full configurable service & upgrade kit containing fork seal kit, fork oil, bushing lubricant, grease, tools and upgrades
Fits all Manitou 32 mm forks from 2007-19 including Minute, Marvel, Circus (but not Circus Pro), Machete, Drake, Tower etc
TPC, SPV, ABS+, Lockout, Coil spring, TS Air, ISO Air etc

See Related Products for details on components of this service kit Learn More

Manitou Part Code: 141-27220-K003 Learn More

Manitou Part Code: 141-27220-K002 Learn More

Preload adjuster & cap for Manitou Circus & Match coil sprung forks
Thread M30 x 1 mm

Manitou Part Code: 141-27181-K002 Learn More

Spring side compression rod for coil spring Manitou Circus forks Also fits Manitou Drake 2010 and Minute & Marvel coil spring forks Also works with ACT air/coil spring system Includes all necessary spacers for use in 80, 100 & 130 mm forks Includes foot bolt with M8 x 1.0 mm thread Manitou Part Code: 141-23999-K003 Learn More

ABS+ damper kit for Manitou Circus Expert 32 mm jump forks with alloy legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Red alloy piston is 28mm OD (excluding oring) and fits fits the majority of Minute, Marvel, Machete and Circus Expert forks.
Fitment: M30 x 1.0 mm cap threads, 28 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K007 Learn More

IVA: Incremental Volume Adjust A 5 position spacer system to tune positive air chamber volume and increase progression
Thread M31 x 0.8 mm
Finer thread than the Mattoc/Magnum IVA upgrade kit

Manitou Part Code: 141-35384-K006 Learn More

ABS+ damper kit to upgrade Manitou Circus Comp 32 mm jump forks with steel legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Gold anodised alloy piston is 29mm OD (excluding oring) and only fits the chromed steel legs, it will not fit alloy stanchion forks.
Jump tune features a lot of compression damping.
Fitment: M30 x 1.0 mm cap threads, 29 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K006

Learn More