Marzocchi

Parts to fit Marzocchi suspension.

Set Descending Direction

25 Item(s)

  1. 1/2" DU Bushing (Monocrome)

    US$3.46

    In stock

    Straight replacement for shock eyelets in Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide. 

    Learn More
  2. 1/2" IGUS Eyelet Bushing

    US$10.38

    In stock

    Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide.  Available with shock eyelet pressing or complete custom fitted shock hardware.

    Learn More
  3. 1/2" Low Friction Flanged Bushing Pair

    US$12.43

    Available on backorder

    Flanged bushings for shock eyelets
    Installed as a pair with o-rings (not included) for new fitment or repair
    Straight replacement for similar bushings from Fox, Trelleborg etc

    Note these have a tighter ID than Fox & IGUS
    They can be reamed to size after installation if they are too tight

    Learn More
  4. Fox Flanged bushings for shock eyelets
    Installed as a pair with o-rings (not included) for repair
    Straight replacement for genuine Fox flanged bushings provided the pin isn't worn

    If you have a worn pin causing a knock, then use the green versions which have a tighter ID

    Learn More
  5. Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets.
    1/2" ID x 1/2" Wide.  
    Pre-tensioned bushing to accomodate small variations in eyelet diameter and shape without binding or play Available with shock eyelet pressing or complete custom shock hardware

    Learn More
  6. Fork service & upgrade kit containing fork seal kit, fork oil, Slickoleum assembly grease & oil syringe.
    Service kit works for all internals (air, coil, TTX22, STX22, TTX18 etc etc).
    Optional high flow piston kit works for TTX22 and STX22 versions only.

    Learn More
  7. Fork service kit containing fork seal kit, fork oil, Slickoleum assembly grease & oil syringe.
    Kit fits Marzocchi 30 mm Bomber forks 1996-2002

    Learn More
  8. Fork Service Kit for Marzocchi 32 mm Forks

    From: US$44.18

    To: US$189.97

    Fork service kit containing fork seal kit, fork oil, Slickoleum assembly grease & oil syringe.

    Learn More
  9. Marzocchi 30 mm Fork Seal Kit (ARIETE) Learn More
  10. Marzocchi 32 mm Fork Seal Kit (ARIETE) Learn More
  11. Marzocchi 32 mm Fork Seal Kit (Enduro)

    US$48.39

    Currently Unavailable

    This part has been superseded by Marzocchi 32 mm Fork Seal Kit (ARIETE)

    Fits all Marzocchi 32 mm forks Learn More
    • Out of stock

  12. Marzocchi 35 mm Fork Seal Kit (ARIETE) Learn More
  13. Marzocchi 38 mm Fork Seal Kit (ARIETE)

    Fits 66 & 888 forks from 2008 Learn More
  14. Marzocchi 38 mm Fork Seal Kit (Enduro)

    US$28.25

    Currently Unavailable

    New alternative product: Marzocchi 38 mm Fork Seal Kit (ARIETE)

    Fits 66 & 888 forks from 2008 Learn More
    • Out of stock

  15. For all Monster T forks Learn More
  16. Marzocchi R380 20 mm Axle Cap (Shockcraft)

    US$69.23

    Custom made to order

    Shockcraft manufactured 20 mm axle cap for Marzocchi R380 forks
    M16 fine thread.
    Stronger version with thicker flange to replace original which can crack the flange off Learn More
  17. Party Pack for Fork Service

    From: US$22.85

    To: US$187.20

    Get Super Smooth Suspension with Supergliss, Slickoleum & SKF Seals.  Our fork service party packs include the oils, grease and tools specially selected by Shockcraft to help make your forks run smoother.

    STEP 1: Buy fork service party pack & SKF seals (select your SKF kit/s here)
    STEP 2: Get together with your riding buddies & service forks
    STEP 3 (most important): Enjoy the ride!

    Motorex fork oils & lubricants are also available at a lower price in 1 & 4 litre refilled bottles

    Learn More
  18. For the first time, Vorsprung has created an air spring with a truly better spring rate, everywhere in the travel, than a coil.  The Secus upgrade delivers the first and only single crown air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.

    This version of the Secus fits Fox 32, 34 & 36 mm stanchioned forks & Marzocchi Z1 2019+ forks (see Compatibility info).  Also available for RockShox & Fox 38/40 mm forks.
    Learn More
  19. For the first time, Vorsprung has created an air spring with a truly better spring rate, everywhere in the travel, than a coil.  The Secus upgrade delivers the first and only single crown air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.

    This version of the Secus fits Fox 38 mm stanchioned forks (see Compatibility info).  Also available for RockShox, Fox 32/34/36/40 mm & Marzocchi forks.
    Learn More
  20. For the first time, Vorsprung has created an air spring with a truly better spring rate, everywhere in the travel, than a coil.  The Secus upgrade delivers the first and only single crown air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.

    This version of the Secus fits Fox 40 mm stanchioned forks (see Compatibility info).  Also available for RockShox, Fox 32/34/36/38 mm & Marzocchi forks.
    Learn More
  21. For the first time, Vorsprung has created an air spring with a truly better spring rate, everywhere in the travel, than a coil.  The Secus upgrade delivers the first and only single crown air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.

    This version of the Secus fits RockShox forks (see Compatibility info).  Also available for Fox & Marzocchi forks.
    Learn More
  22. Vorsprung Smashpot coil conversion system for Fox 36 forks
    Fits 2015+ Fox 36 forks with M33x0.8mm top-caps
    2021+ Fox 36 forks require the 20 mm top cap adapter
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Will not fit E bike forks with smaller ID stanchions and caps
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  23. Vorsprung Smashpot coil conversion system for Marzocchi Z1 forks
    Fits 2019+ Marzocchi Z1 forks with M33x0.8mm top-caps
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Will not fit E bike forks with smaller ID stanchions and caps
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  24. Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Slash with Thru-Shaft Reaktiv
    Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
    Product includes conversion pins, modified Marzocchi Bomber CR 230 x 60 mm coil shock and coil spring

    Resulting combination bolts straight in

    Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight

    Please contact us to confirm availability

    Learn More
  25. Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Slash with Thru-Shaft Reaktiv.
    2018-2020 Remdy & Slash Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower 50mm hardware offset to one side
    2021+ Slash uses a 230x62.5mm shock with 40mm centred hardware.
    Product includes conversion pins, DU Bushings, Marzocchi Bomber CR 230 x 60 mm coil shock and coil spring. 
    We can changed the stroke on this shock from 0-65mm.

    Resulting combination bolts straight in.

    Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight

    Please contact us to confirm availability

    Learn More

Set Descending Direction

25 Item(s)