We are OPEN
Click here for updates on our current status.
 

Cane Creek

Parts to fit Cane Creek suspension.

Set Descending Direction

1-25 of 27

Page:
  1. 1
  2. 2
  1. 1/2" Low Friction Flanged Bushing Pair

    US$10.70

    Please enquire

    Flanged bushings for shock eyelets
    Installed as a pair with o-rings (not included) for new fitment or repair
    Straight replacement for similar bushings from Fox, Trelleborg etc

    Note these have a tighter ID than Fox & IGUS
    They can be reamed to size after installation if they are too tight

    Learn More
    • Out of stock

  2. X-Fusion Flanged bushings for shock eyelets
    Straight replacement for genuine Fox flanged bushings provided the pin isn't worn
    Installed as a pair with o-rings (not included) for repair

    If you have a worn pin causing a knock, then use the green versions which have a tighter ID

    Learn More
  3. Application: Cane Creek rear shock eyelets that require 12.7 mm x 14.7 mm x 12.7 mm bushings ID: 12.7 mm, OD: 14.7 mm, W: 12.7 mm Learn More
  4. 16 mm DU Bushing (Cane Creek)

    US$19.20

    In Stock

    Application: Cane Creek rear shocks that require 16 mm OD bushings ID: 12.7 mm, OD: 16 mm, W: 12.7 mm Learn More
  5. Application: Cane Creek IS42 Headsets
    36 x 45 degree ACB
    ID: 30 mm, OD: 41.8 mm, W: 6.3 mm
    Zinc coated steel Learn More
  6. ID: 40 mm, OD: 52 mm, W: 6.5 mm
    Stainless Steel Learn More
  7. Cane Creek DB Kitsuma Coil Shock

    As low as: US$755.93

    Kitsuma is a strong, gravity-first shock that allows you to go faster thanks to a more personalized tune.  With the increased ground-tracking sensitivity of a coil spring and the most damper oil of Cane Creek's entire shock family, it offers amazing downhill performance and maximum possible grip. 

    The Kitsuma shocks are available via the New Zealand supplier and lead time is usually a few days
    Other sizes also available
    Contact us to confirm availability

    Learn More
  8. Cane Creek Progressive VALT lightweight coil spring
    Designed to be as light as possible without sacrificing action or durability
    High quality steel
    Progressive-Rate
    Inner diameter 36.5 mm
    Fits all Cane Creek coil shocks as well as Manitou, Marzocchi, XFusion, BOS, and DSP
    Fox coils shocks can be fitted with these springs when installed with a spring clip adapter

    These springs are available via the New Zealand supplier and lead time is usually a few days
    Contact us to confirm availability
    Learn More
  9. Cane Creek Tigon Coil Shock

    As low as: US$879.34

    Tigon - the Air-Charged Coil Shock

    Tigon is an entirely new DB Twin Tube shock that combines the sensitivity of a coil shock with the tunable support of an air spring – to fuel your most creative and playful riding yet

    The Tigon shocks are available via the New Zealand supplier and lead time is usually a few days
    Other sizes also available
    Contact us to confirm availability Learn More
  10. Cane Creek VALT lightweight coil spring
    Designed to be as light as possible without sacrificing action or durability
    High quality steel
    Inner diameter 36.5 mm
    Fits all Cane Creek coil shocks as well as -Manitou, Marzocchi, XFusion, ELKA/MRP, BOS, and DSP
    Fox coils shocks can be fitted with these springs when installed with a spring clip adapter

    These springs are available via the New Zealand supplier and lead time is usually a few days
    Contact us to confirm availability
    Learn More
  11. DB Air Schrader Valve Kit (Cane Creek)

    US$13.82

    Available on backorder

    Cane Creek DB Air Schrader Valve Kit
    Fits Double Barrel Air shocks  M8 x 0.8 mm thread.
    Includes valve stem, valve core, o-ring and cap.

    Cane Creek Part Code: AD1010

    Learn More
  12. Damper body tube for Cane Creek Double Barrel Air
    For 216x63 and 222x75mm sizes.  102.4 mm total length
    Black anodised replaces AAD0181
    Available only with Shockcraft Service
    Shockcraft is an approved Cane Creek service agent

    Cane Creek Part Code:  AAD1687 Learn More
  13. Double Barrel Air Spring Rebuild Kit (Cane Creek)

    US$33.52

    Available on backorder

    Air spring rebuild kit for Cane Creek Double Barrel rear shocks
    Kit includes air can seals and seals & backup rings for air piston & seal head
    Available only with Shockcraft Service
    Shockcraft is an approved Cane Creek service agent
    Cane Creek Part Code: BAD0241

    Learn More
  14. Air spring rebuild kit for Cane Creek Double Barrel rear shocks
    Kit includes air can seals and seals & backup rings for air piston & seal head
    Available only with Shockcraft Service
    Shockcraft is an approved Cane Creek service agent
    Cane Creek Part Code: BAD0241

    Learn More
  15. Available only with Shockcraft Service
    Shockcraft is an approved Cane Creek service agent
    Cane Creek Part Code: AAD0054 Learn More
  16. Double Barrel Coil Seal Head Assy 9.5 mm v 2.0 (Cane Creek)

    US$34.70

    Available Ex NZ Supplier 2 Days

    Available only with Shockcraft Service
    Shockcraft is an approved Cane Creek service agent

    Cane Creek Part Code: AAD0054 Learn More
    • Out of stock

  17. Gas seal plug for Cane Creek Double Barrel rear shocks
    Available only with Shockcraft Service
    Shockcraft is an approved Cane Creek service agent
    Cane Creek Part Code: DB11115

    Learn More
  18. Oil Seal Head Assembly V2 for Cane Creek Double Barrel Inline rear shocks
    Available only with Shockcraft Service
    Shockcraft is an approved Cane Creek service agent
    Cane Creek Part Code: AAD1804

    Learn More
  19. Air spring rebuild kit for Cane Creek Double Barrel Inline Air Spring Rebuild Kit
    Available only with Shockcraft Service
    Shockcraft is an approved Cane Creek service agent
    Cane Creek Part Code: BAD1185

    Learn More
  20. Coil Damper Seal Head Assembly V2 for Cane Creek Double Barrel Inline rear shocks
    Available only with Shockcraft Service
    Shockcraft is an approved Cane Creek service agent
    Cane Creek Part Code: AAD11738

    Learn More
    • Out of stock

  21. Double Barrel Inline Diaphragm (Cane Creek)

    US$11.30

    Available on backorder

    Diaphragm for Cane Creek Double Barrel Inline rear shocks
    Available only with Shockcraft Service
    Shockcraft is an approved Cane Creek service agent
    Cane Creek Part Code: AAD1223

    Learn More
  22. Double Barrel Inline Shaft 84mm (Cane Creek)

    US$23.75

    Available on backorder

    Replacement damper shaft for Cane Creek Double Barrel Inline rear shocks
    84mm length for 200x56mm etc
    Available only with Shockcraft Service
    Shockcraft is an approved Cane Creek service agent
    Cane Creek Part Code: AAD0463

    Learn More
  23. Spring clip for Cane Creek Double Barrel rear shocks
    Available individually or with Shockcraft Service
    Shockcraft is an approved Cane Creek service agent
    Cane Creek Part Code: DB11246K

    Learn More
  24. GE8C Spherical Bearing

    US$27.90

    Last One Left

    Application: Cane Creek, Öhlins & Manitou LRS Rear Shock Eyelets
    ID: 8 mm, OD: 16 mm, Body W: 5 mm, Ball W: 8 mm

    Learn More
  25. Metal reducer bushing 15.08x16x12mm
    Reduces Ohlins & Cane Creek 16 mm eyelets to fit standard 15.08mm shock hardware

    Ohlins Part Code:  19311-01 Learn More

Set Descending Direction

1-25 of 27

Page:
  1. 1
  2. 2