1/2" x 7/8" x 1/4" Lip Seal Spring Energised
Nitrile Rubber

Shockcraft Part Code:  S-LSE-0.5X0.875X0.25IN-NBR Learn More

Travel spacer for Manitou forks
C-clip design
10 mm total height, 27.9 mm diameter, with internal recess 1 mm each side
Fits 10 mm shafts
Manitou Part Code: 121-29113

Learn More

Travel spacer for Manitou forks
C-clip design
10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
Fits 12.7 mm shafts
Manitou Part Code: 121-30396

Learn More

Travel spacer for Manitou forks
C-clip design
10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
Fits 10 mm damper shafts
Manitou Part Code: 121-32318

note photo is of 12.7mm shaft version: 121-30396

Learn More

32 mm Nixon Spring Cap 2007 (Manitou)

Manitou Part Code: 83-3235 Learn More

ABS+ & TPC compression knob detent ball
3.2mm diameter.
Sold individually.

Manitou Part Code: 141-26930-K042

Learn More

ABS+ & TPC compression knob detent spring
Spare part for loss repair.  Located on top of compression assembly under knob.
Fits 3.5mm pocket
6.3mm long, 3mm OD
Sold individually, 2 used in each knob.

Manitou Part Code: 141-26930-K041

Learn More

Brake line clamp for MY20+ forks (Manitou)
Fits J-Unit Machete, Mezzer, R7 (2021+), Machete Comp (2021+) etc.
Includes mounting screw.

Manitou Part Code:  141-36103-K003

Learn More

Dorado 37 mm Mud-guard, Crown, Drop Out Bolt Kit (Manitou)

Manitou Part Code: 141-38380-K028 Learn More

Bolt kit for Manitou Dorado 2022 (37mm)

Manitou Part Code: 141-36521 Learn More

Dorado sag & hose guide with screws kit.
Suitable for all 37mm Dorado 2022 onwards.

Manitou Part Code: 141-38380-K043 Learn More

M10 foot bolt with o-ring
Fits a range of Manitou forks from 2003 Sherman to current day
Included PU O-ring size -610 (-010 also fits)

Manitou Part Code: 065371

Learn More

M8 Flanged foot bolt with o-ring
Fits a range of Manitou forks from 2008 Minute to current day
Included PU O-ring size -010

Manitou Part Code: 067892

Learn More

Damper knob and plate for Manitou ABS+ and TPC dampers.
6mm internal hex
Black anodised aluminium knob and aluminium detent plate
Fits all ABS+ dampers since 2011 and TPC+ from approx 2007
No lever allows full rotation.
Used on Circus forks

Manitou part code:  141-27177-K007

Learn More

Air Preload Cap for Manitou Minute 2005

Manitou Part Code: 85-5873 Learn More

Manitou Minute Rapid Travel Wind Down (RTWD) coil spring top cap assembly 2005.

Manitou Part Code: 85-5950 Learn More

Mattoc/Magnum HBO check spring
Spare part for loss repair.  Located behind HBO cup on compression assembly.
7mm long, 4.2mm OD.

Manitou Part Code: 06-30829

Learn More

Mattoc/Magnum HBO knob detent spring
Spare part for loss repair.  Located inside HBO knob on top of compression assembly.
3.8mm long, 2mm OD
Sold individually, 2 used in each knob.

Manitou Part Code: 06-29643

Learn More

Mattoc/Magnum Pro MC² compression damper HBO Cup
Spare part for repair or upgrading Mattoc Expert to Mattoc Pro damper
Pro HBO cup is smaller diameter than Expert version and must be used only with matching HBO cone.

Manitou Part Code: 126-30377

Learn More

Nixon IT Cable Guide Assembly 2005

Manitou Part Code 83-2318 Learn More

Piston Band glide ring for Dorado 2009-2018
Blue turcite
16 mm OD
2.8 mm tall
Manitou Part Code: 072334

Piston not included (Manitou Part Code: 072331-F002)

Learn More

Piston Band glide ring for all Pro Cartridge rebound forks
White PTFE 16 mm OD, 2.8 mm tall
Manitou Part Code: 129-27542-L150

Piston not included (Manitou Part Code: 126-27209)

Learn More

Rebound Piston with PTFE Glide Ring for all Pro Cartridge rebound forks.
Blue aluminium 14.3 mm OD, 7 mm tall
18 holes
Manitou Part Code: 126-27209

PTFE Glide Ring
Manitou Part Code: 129-27542-L150

Learn More

1/2" damper shaft seal for 2018+ Manitou forks
12.6 x 21 x 8 mm dimensions.  Fits 1/2" damper shafts
Fits inside damper side stanchion end-cap for service or repair

Manitou Part Code:  08-33203 Learn More

Generation 2 fender mudguard to fit all Manitou forks with existing mount holes
Used from MY2020 onwards.  Same shape as MY2019 but softer and more flexible material.
Bolt on fitment by 3x screws (included) to rear of arch.castings
Backwards compatible to MY2018+ Mattoc Pro Boost forks

Manitou Part Code: 141-36103-K001 Learn More