You have no items in your shopping cart.
Air Shocks
We supply the full range of Manitou air shocks but sometimes you just want coil or you need a shock for a particular fitment. We are able to order in shocks from various brands, including Ohlins, Cane Creek, Marzocchi, Fox, RockShox, DT Swiss, X-Fusion and more. We can provide recommendations on which shocks are better for your application, are more tuneable or set and forget, which are the most awesome and which fit your budget. As we service and tune all brands of suspension we have very good knowledge of what works and what doesn't. And we'll be honest about it.
Use our Rear Shock Enquiry Form to tell us what you're after and we'll come back with options and pricing.
Use our Rear Shock Enquiry Form to tell us what you're after and we'll come back with options and pricing.
-
Manitou Mara GEN 1 Pro Rear Shock
US$372.40The Mara Pro is Manitou's piggy back heavy duty air shock
Imperial, Metric Eyelet and Metric Trunnion versions available
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable
Note on Shock Availability:
The Mara Pro Generation 1 shocks are on run-out pricing. Sizes available as shown.
Shock Stroke Change
There is no charge for stroke change for stock Mara Inline stroke sizes. e.g. if we have a 210 x 50 mm shock in stock but you need a 210 x 55 mm shock there is no charge to change the stroke.
Shock Length Modification
We also change shock length of new Mara Inlines at no additional charge. e.g. we can change a 190 x 50 mm to 185 mm x 45 mm. Learn More -
Manitou Mara GEN 1 Pro Shock Metric Eyelet 190 x 45 mm Ex-Demo
US$372.40Last One Left
This is a lightly used, ex-demo shock in great condition.
Comes with the Shockcraft Warranty.
Manitou Mara Pro Shock Metric Eyelet 190 x 45 mm Ex-Demo
Can be reduced to 40 mm stroke
The Mara Pro is Manitou's piggy back heavy duty air shock
Metric eyelet version (not trunnion mount)
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable.
Manitou Part Code: 192-36851-A020 Learn More -
Manitou Mara GEN 1 Pro Shock Metric Eyelet 210 x 50 mm Ex-Demo
US$372.40Last One Left
This is a lightly used, ex-demo shock in great condition.
Comes with the Shockcraft Warranty.
Manitou Mara Pro Shock Metric Eyelet 210 x 50 mm Ex-Demo
Can be increased to 55 mm stroke
The Mara Pro is Manitou's piggy back heavy duty air shock
Metric eyelet version (not trunnion mount)
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable.
Manitou Part Code: 192-36851-A021 Learn More -
Manitou Mara GEN 2 Comp Inline Rear Shock
From: US$430.87
To: US$643.23
Manitou Mara Pro GEN 2 Comp Inline rear shock
Inline design allows shock to shed weight while still offering support and performance for the majority of riding styles
Trail specific tune designed for maximum shock responsiveness, making it perfect for aggressive riding
This tune gives the best feel in open small bump sensitivity; increases compression across the adjuster range to a mid-firm platform that is great for pedalling up technical climbs where traction is balance with pedalling efficiency
Mara Comp Inline has simplified arcitecture compared to the Mara Pro Inline
It lacks rebound detents and different materials have been used, meaning a lower price point
All versions apart from XC versions are configured with a new King Can with an active positive/negative system called Balance Groove Technology
XC versions are fitted with a XC Shim Stack & Lite Can
The Lite Can also utilises the same Balance Groove Technology but with a reduction in overall volume for riders looking for a less linear feel to the shock
Ready Mix Tune - Targeted Tuning
Available with optional Shockcraft Ready Mix Tune. The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you. With the Ready Mix Tune you will get the right combination of playfulness, poppiness and plantedness. The shock will be stable, supportive and suck up the bumps. You'll notice huge changes in feel, speed and confidence. There is also a choice of Trail tune for incremental compression or XC tune with firm lockout.
Note on Shock Availability:
Most sizes are in stock with Manitou USA. Place your order now to reserve a Mara Inline in our next order from Manitou USA.
Shock Stroke Change
There is no charge for stroke change for stock Mara stroke sizes. e.g. if we have a 210 x 50 mm shock in stock but you need a 210 x 55 mm shock there is no charge to change the stroke. Learn More -
Manitou Mara GEN 2 Pro Inline Rear Shock
From: US$584.75
To: US$797.11
Manitou Mara Pro GEN 2 Pro Inline rear shock
Inline design allows shock to shed weight while still offering support and performance for the majority of riding styles
Trail specific tune designed for maximum shock responsiveness, making it perfect for aggressive riding
This tune gives the best feel in open small bump sensitivity; increases compression across the adjuster range to a mid-firm platform that is great for pedalling up technical climbs where traction is balance with pedalling efficiency
All versions apart from XC versions are configured with a new King Can with an active positive/negative system called Balance Groove Technology
XC versions are fitted with a XC Shim Stack & Lite Can
The Lite Can also utilises the same Balance Groove Technology but with a reduction in overall volume for riders looking for a less linear feel to the shock
Ready Mix Tune - Targeted Tuning
Available with optional Shockcraft Ready Mix Tune. The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you. With the Ready Mix Tune you will get the right combination of playfulness, poppiness and plantedness. The shock will be stable, supportive and suck up the bumps. You'll notice huge changes in feel, speed and confidence. There is also a choice of Trail tune for incremental compression or XC tune with firm lockout.
Note on Shock Availability:
Most sizes are in stock with Manitou USA. Place your order now to reserve a Mara Inline in our next order from Manitou USA.
Shock Stroke Change
There is no charge for stroke change for stock Mara stroke sizes. e.g. if we have a 210 x 50 mm shock in stock but you need a 210 x 55 mm shock there is no charge to change the stroke. Learn More -
Manitou Mara Pro GEN 2 Pro Piggyback rear shock
Gravity-orientated with piggyback design
Shorter reservoir and lower profile Work/Party lever, to improve compatibility with the widest offering of frames possible
Two separate damping circuits that can be activated or bypassed by the Work/Party mode lever
Having two separate circuits allows the rider to have two no-compromise options, for climbing and descending
Word mode is a preset, independent damping circuit designed for climbing
Party mode is an externally adjustable high and low speed compression circuit that offers a large range of tuning for a variety of riders and conditions
A new compression piston and updated shim stacks have been designed in conjunction with the Gen 2 Balance Groove Air Cans
Together these provide improved small bump compliance along with support that can be tuned with the external compression adjusters and internal air volume adjustment
DH versionis based off the exact same core build but removes the unnecessary Work/Party levers, eliminating the possibility for inadvertent actioning of platform
All versions are configured with a new King Can with an active positive/negative system called Balance Groove Technology
Note on Shock Availability:
Most sizes are in stock with Manitou USA. Place your order now to reserve a Mara Inline in our next order from Manitou USA.
Shock Stroke Change
There is no charge for stroke change for stock Mara stroke sizes. e.g. if we have a 210 x 50 mm shock in stock but you need a 210 x 55 mm shock there is no charge to change the stroke. Learn More -
Manitou Mara Inline Rear Shock
From: US$287.76
To: US$787.88
Designed for the riders that do everything, the Mara is ready for anything
Manitou's IPA damper features four different compression positions ranging from an open mode ready to smash rocks to a firm platform mode for those hard climbs and all out sprints
Made with 7050 aerospace-grade aluminum the chassis is both lightweight and durable
Imperial Eyelet, Metric & Trunnion sizes available up to 65mm stroke.
Ready Mix Tune - Targeted Tuning
Available with optional Shockcraft Ready Mix Tune. The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you. With the Ready Mix Tune you will get the right combination of playfulness, poppiness and plantedness. The shock will be stable, supportive and suck up the bumps. You'll notice huge changes in feel, speed and confidence. There is also a choice of Trail tune for incremental compression or XC tune with firm lockout.
Note on Shock Availability:
The Mara Inline Generation 1 shocks (excluding Imperial sizes) are on run-out pricing. Sizes available as shown.
Shock Stroke Change
There is no charge for stroke change for stock Mara Inline stroke sizes. e.g. if we have a 210 x 50 mm shock in stock but you need a 210 x 55 mm shock there is no charge to change the stroke.
Shock Length Modification
We also change shock length of new Mara Inlines at no additional charge. e.g. we can change a 190 x 50 mm to 185 mm x 45 mm. Learn More -
Trek Rail Manitou Mara Inline Conversion (Shockcraft)
From: US$349.31
To: US$872.51
Custom Hardware for fitting a Manitou Mara Inline Air shock to a Trek Rail with Thru-Shaft Reaktiv
Learn More
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes conversion pins and Manitou Mara Inline 230 x 60 mm
Resulting combination bolts straight in. The Manitou Mara Inline in stock form has firm 4 stage compression damping and is suited to XC style riding. We recommend a piggy back shock for more aggressive riders (Mara Pro). Tuning for your weight and riding style is also available.
Please contact us to confirm availability -
Trek Rail Manitou Mara Pro Conversion (Shockcraft)
From: US$803.27
To: US$1,480.35
Manitou Mara Pro Gen2 Air shock with conversion kit to fit a Trek Rail with Thru-Shaft Reaktiv
Learn More
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes Mara Pro Shock, Shockraft Lift Kit with conversion pin.
Optional tuning and heavy duty bolt kit.
Resulting combination bolts straight in. The Manitou Mara Pro has adjustable HS & LS comprssion and is suited to all riding styles. Tuning for your weight and riding style is also available - details here
Please contact us to confirm availability -
Trek Remedy & Slash Manitou Mara Pro Air Conversion (Shockcraft)
From: US$61.55
To: US$252.37
Special size Manitou Mara Pro Air shock with custom shock pin to fit a Trek Slash or Remedy with Thru-Shaft Reaktiv
Learn More
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes Shockcraft Deaktiv conversion lower pin and Manitou Mara Pro piggy back shock.
Choose travel from 230 x 60 mm (stock Mara), 230 x 57.5 mm (stock trek ) to 230x65mm if you have clearance to do so.
Resulting combination bolts straight inOut of stock
Shop By
Shopping Options
- Fork Model
- Rear Shock Model
- Activity
- Shock Length
- Shock Stroke
- Shock Head Style
- Shock Type
- Climb Switch/Lockout
Recent Posts
-
Good suspension should be stable and supportive while being planted, y... -
Deans Bank 6 Hour, Wanaka Bike Wanaka is back with their Deans Bank r... -
Bike of the Month, October 2023 Transition Smuggler with Ready Mix Tu...
Categories
Instagram
