We are OPEN
Click here for updates on our current status.
 

Rear Shock Tools

Set Descending Direction

22 Item(s)

  1. Shock Pump 300 psi (Manitou)

    US$65.34

    In Stock

    0 to 300 psi Manitou Part Code: 85-4162 Learn More
  2. This single RockShox pick tool helps you to carefully remove O-rings during service.
    Pick tool is 140 mm length.
    Made from a non-scratch composite (fibreglass reinforced nylon) material.

    SRAM Part Code: 00.4318.012.013 (for a set of 5) Learn More
  3. Digital Shock Drive (Lezyne)

    US$91.79

    Backorder ex-NZ Supplier

    Compact, lightweight & highly accurate digital shock pump
    Up to 350 psi
    Low profile digital strip gauge built into side
    Integrated hose threads into the handle when not in use
    Zero-loss chuck design unthreads from shock after valve pin seals
    Digital display rounds PSI to nearest whole number Learn More
  4. Clamp block for servicing Fox & RockShox Micro Brain rear shocks
    Designed and manufactured by Shockcraft
    CNC machined from aluminium for a solid clamp with no scratching
    4 clamp sizes - 12 to 27 mm

    Shockcraft Part Code: SC-CLAMP-SPEC-MICROBRAIN-V1 Learn More
  5. Clamp block for servicing Fox Float & DPS inline rear shocks
    Designed and manufactured by Shockcraft
    CNC machined from aluminium for a solid clamp with no scratching
    4 clamp sizes - 9 to 40.4 mm for air-can and damper.

    Shockcraft Part Code:  SC-CLAMP-FOX-FLOAT-V1 Learn More
  6. Clamp block universal for suspension servicing
    Designed and manufactured by Shockcraft
    CNC machined from aluminium for a solid clamp with no scratching
    7 clamp sizes - 8 mm, 9 mm, 3/8", 10 mm, 12 mm, 1/2" and 14 mm

    Shockcraft Part Code:  SC-CLAMP-UNIVERSAL-8-14-V1

    Learn More
  7. Tool for easy removal of bearing cups, without damage, from Fox Float DPS & DPX2 rear shocks fitted with first generation 30 x 8 mm ball bearing cups
    No more screwdrivers! Learn More
  8. Rockshox Schrader Valve Removal Tool Learn More
    • Out of stock

  9. Clamp Block Forks & Shocks (Manitou)

    US$215.47

    Available on backorder

    Fork and shock shaft clamp block
    Etched part code:  172-31242
    Sizes 16.3, 14, 12.6, 12, 10 & 8mm
    For most Manitou forks and shocks

    Manitou Part Code:  172-31464 Learn More
  10. Manitou Part Code: 142-37512-K037 Learn More
  11. Keychain tool for rear shock service Manitou Part Code: 83-2694 Learn More
  12. Rear Shock ISX-X4 SVR Tool (Manitou)

    US$12.01

    No Longer Available

    Five-sided tool for removal of damper plugs in Swinger X4 & ISX rear shocks New Old Stock (NOS) Manitou Part Code: 83-3236 Learn More
    • Out of stock

  13. Valve Adapter Tool (SRAM)

    US$17.14

    In Stock

    SRAM valve adapter to fit Schrader cores in certain Rockshox forks & shocks SRAM Part Code: 00.4315.027.010 Learn More
  14. Rockshox Shock Pump 600 psi (SRAM)

    US$70.39

    Available on backorder

    Rockshox fork & shock pump 600 psi max (SRAM)

    SRAM Part Code:  00.4315.023.030 Learn More
  15. Shock Bushing Extractor Set 12 & 12.7mm (Unior)

    US$38.27

    Available on backorder

    Unior shock bushing extractor
    For easy removal of bushings from rear shocks
    Fits shock bushings with diameter 12 mm and 12.7 mm (1/2")

    Unior Part Code: 623006 Learn More
  16. Valve Core Removal Tool

    US$4.60

    In Stock

    Valve Core Removal Tool
    Screwdriver type for removing schrader valve cores.
    Works on forks, shocks and schrader tyre valves.

    Shockcraft part code:  T-SCHRADER-CORE Learn More
  17. This is a complex spring rate calculator to determine front and rear spring rates for Trail and Enduro MTB.

    Enter rider weight, bike weight and unsprung weights as well as bike geometry numbers to get the most accurate starting point for bike setup.

    Learn More
  18. Rockshox Shock Pump 300 psi (SRAM)

    US$51.42

    Available on backorder

    Rockshox fork & shock pump 300 psi max (SRAM)

    SRAM Part Code:  00.4315.023.010 Learn More
  19. This is a complex frequency based spring rate calculator to determine rear spring rates for Trail and Enduro MTB.

    Enter rider weight, bike weight and unsprung weights as well as bike geometry numbers to get the most accurate starting point for bike setup.

    Learn More
  20. This is a simple spring rate calculator to ball-park bike setup and provide a front spring rate.

    It makes several assumptions to reduce the user input down to just one variable (rider weight).  If you want a more accurate calculator and/or one that calculates rear shock spring rate then use one of our Advanced Bike Spring Rate Calculators here.

    Learn More
  21. A calculator to find the spring rate (in lb/in), maximum travel (mm), force at bottom-out and material stress (MPa) of an unindentified spring.

    Enter wire diameter (mm), diameter inside the coils (mm), the number of coils that are free to move and the travel required.

    You must purchase a voucher code to use this calculator.  The voucher code will be emailed to you after purchase and can only be used once.  Simply click add to cart and proceed through the checkout process.

    Also available: Simplified Coil Spring Calculator - find spring rate (in lb/in) of an unindentified spring.

    Learn More
  22. A calculator to find the spring rate (in lb/in) of an unindentified spring.

    Enter wire diameter (mm), diameter inside the coils (mm) and the number of coils that are free to move.

    You must purchase a voucher code to use this calculator.  The voucher code will be emailed to you after purchase and can only be used once.  Simply click add to cart and proceed through the checkout process.

    Also available: Detailed Coil Spring Calculator - find spring rate (in lb/in), maximum travel (mm), force at bottom-out and material stress (MPa) of an unindentified spring.

    Learn More

Set Descending Direction

22 Item(s)