Forks

Manitou MezzerHere at Shockcraft we service and support all suspension forks* regardless of age, type and model.  We can supply service kits and parts for all mainstream brands and most minor.  We offer tuning and upgrades for the most popular suspension platforms.  We are also the NZ agents for Manitou and have access to the full range of Manitou forks & parts.

*Including forks from Manitou, Rockshox, Fox, Cane Creek, Marzocchi, Ohlins, Specialized, DVO, DT, Magura, Maverick, Pace, RST, Suntour, Wren, X-Fusion, AMP Research, Noleen, Kona, Lapierre, Curnutt, DMN, BOS, Elka, Scott, Stratos and others; excluding Cannondale Headshock & Lefty.


Set Descending Direction

1-25 of 338

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. 1/2" x 3/4" x 1/4" U Cup Non-Energised Oil Seal
    Polyurethane

    Shockcraft Part Code:  S-UC-0.5X0.75X0.25IN-POLY Learn More
  2. 1/2" x 7/8" x 1/4" Lip Seal Spring Energised
    Nitrile Rubber

    Shockcraft Part Code:  S-LSE-0.5X0.875X0.25IN-NBR Learn More
  3. 1 1/8" x 1.339 x 0.107 AN Wiper
    Fits vintage Manitou 3,4 & EFC forks.
    Fits several X-fusion & Specialized air shocks. Learn More
  4. 10 ml Oil Syringe - for fork filling & brake bleeding Learn More
  5. 10 mm Shaft Clamp (Vorsprung)

    US$26.56

    In stock

    Shaft clamp tool for use in installation of Luftkappe & Secus

    Learn More
  6. 12 mm Crush Washer
    16mm OD, 2.3mm thick.
    Fits Fox, Rockshox & other forks.

    Sold indvidually. Learn More
  7. Travel spacer for Manitou forks
    C-clip design
    10 mm total height, 27.9 mm diameter, with internal recess 1 mm each side
    Fits 10 mm shafts
    Manitou Part Code: 121-29113

    Learn More
  8. Travel spacer for Manitou forks
    C-clip design
    10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
    Fits 12.7 mm shafts
    Manitou Part Code: 121-30396

    Learn More
  9. Travel spacer for Manitou forks
    C-clip design
    10 mm height change, 13.8 mm total height, 31.7 mm diameter, with internal recess and external snout
    Fits 10 mm damper shafts
    Manitou Part Code: 121-32318

    note photo is of 12.7mm shaft version: 121-30396

    Learn More
  10. 15x100 Through Axle Hexlock SL Tooled (Manitou)

    US$60.54

    Available on backorder

    A simpler, lighter and more compact axle to replace the QR15 hexlock in Manitou Magnum, Machete, Mattoc, Minute or Marvel QR15 forks. Axle can be tensioned and removed with a single 6 mm hex key. Manitou Part Code: 141-33147-K001
    Current model is Black. Learn More
  11. QR 15 mm Hex Lock Through Axle to fit all 15 mm x 100 mm Manitou forks, including Minute, Marvel & Mattoc
    Manitou Part Code: 141-28131-K016

    Alternative:
    15x100 Through Axle Hexlock SL Tooled

    Learn More
  12. A simpler, lighter and more compact axle to replace the QR15 hexlock in Manitou Mattoc, Magnum & Machete QR15 Boost forks. Axle can be tensioned and removed with a single 6 mm hex key. Manitou Part Code: 141-33147-K002

    Learn More
  13. QR15 hex-lock axle Fits 110 mm wide hubs on Mattoc, Magnum & Machete Boost forks
    Manitou Part Code: 141-32155-K011

    Alternative:
    15x110 Through Axle Hexlock SL Tooled Boost

    Learn More
    • Out of stock

  14. Hexlock SL Axle 150mm (Manitou)
    Fits Manitou Mastodon Fat Fork

    Manitou Part Code: 141-33147-K004 Learn More
  15. 20 ml Oil Syringe - for fork filling & brake bleeding Learn More
  16. 20 mm Hex-lock through axle for Sherman/Nixon/Gold-Label/Stance 2003+, Minute 2006 & Dorado 2003-2008
    Hex measures 22.8 mm A/F non-disc side and 18.4 mm A/F disc side
    Black Colour
    Manitou Part Code: 85-5070

    Learn More
  17. 20 mm Hex-lock through axle for 2006+ Manitou Travis
    Also fits 2008+ Minute/Drake/Circus 2009+ Dorado
    Interchangable with 141-23995
    Hex measures 21.7 mm A/F non-disc side and 18.3 mm A/F disc side
    Cap thread M11 x 1.25mm
    Black Colour

    Manitou Part Code: 83-2966

    Learn More
  18. 20x110 mm Through Axle 2008+ (Manitou)

    US$31.81

    Available on backorder

    20 mm Hex-lock through axle for Minute/Drake/Circus 2008+, Dorado 2009+
    Also fits 2006+ Manitou Travis
    Interchangable with 83-2966
    Hex measures 21.7mm A/F non-disc side and 18.3mm A/F disc side.
    Cap thread M14 x 1.0mm
    Silver Colour with Black cap.

    Manitou Part Code: 141-23995

    Learn More
  19. Shockcraft's internal seal kit for 28.6 mm Manitou SX & Mars forks Learn More
  20. Shockcraft's internal seal kit for 28.6 mm Manitou Axel forks Learn More
  21. 30 ml Oil Syringe - for fork filling & brake bleeding Learn More
  22. Shockcraft's internal seal kit for 30 mm Manitou Black & Minute forks Learn More
  23. Shockcraft's internal seal kit for 30 mm Manitou Xvert forks Learn More
  24. Shockcraft's internal seal kit for 30 mm Manitou Splice forks Learn More
  25. 30mm Dust Wiper Seal
    Fits approx 38mm seal pocket
    Fits XCR XCM and NRX forks etc
    Sold individually

    SUNTOUR Part Number: FAA070-10 Learn More

Set Descending Direction

1-25 of 338

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5