We Are Open.
Detail on our current operation during NZ's Covid-19 lockdown is available
here.
 

Coil Shocks

Set Descending Direction

5 Item(s)

  1. Cane Creek DB Coil Rear Shock for Giant Reign
    Trunnion Mount top (54 mm wide, M10 x 1.0 threaded holes)
    Open lower eyelet (no bushing) to fit Giant main pivot
    205 mm eye to eye length 62.5 mm stroke
    9.5 mm shaft
    Fits Giant Reign 2018+
    Spring included - select your rate (use our spring calculator to work out spring rate)

    This product is special order Learn More
  2. Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Slash with Thru-Shaft Reaktiv
    Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
    Product includes conversion pins, modified Marzocchi Bomber CR 230 x 60 mm OR 230 x 65 mm coil shock and coil spring

    Resulting combination bolts straight in

    Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight

    Please contact us to confirm availability

    Learn More
  3. Cane Creek DB Coil shock with custom hardware to fit a Trek Slash or Remedy with Thru-Shaft Reaktiv
    Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
    Product includes Shockcraft Deaktiv conversion pins, Cane Creek DB 230 x 57.5 mm coil shock and coil spring

    Resulting combination bolts straight in

    Learn More
  4. Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Remedy 2019-21 & Slash 2018-20 in place of a Thru-Shaft Reaktiv shock.
    2019-2021 Remedy & 2018-2020 Slash Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with upper 54 mm pin and lower 50 mm offset pin.
    Product includes conversion pins, DU Bushings, Marzocchi Bomber CR 230 x 60 mm OR 230 x 65 mm coil shock and coil spring.
    We can change the stroke on this shock from 0-65 mm.

    Resulting combination bolts straight in.

    Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight.

    Please contact us to confirm availability.

    Learn More
  5. Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Slash 2021+ in place of a Thru-Shaft Reaktiv shock
    2021+ Slash uses a 230 x 62.5 mm shock with 54 mm top and 40 mm lower centred hardware
    Product includes conversion pins, DU Bushings, Marzocchi Bomber CR 230 x 60 mm OR 230 x 65 mm coil shock and coil spring

    If using a Marzocchi Bomber CR 230 x 60 mm no additional spacers/labour required to fit but you will lose some travel
    If using a Marzocchi Bomber CR 230 x 65 mm then a stroke reduction is required with shock head removal & re-gas

    We can change the stroke on this shock from 0-65 mm

    Resulting combination bolts straight in

    Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight

    Please contact us to confirm availability

    Learn More

Set Descending Direction

5 Item(s)