1/2" x 7/8" x 1/4" Lip Seal Spring Energised
Nitrile Rubber

Shockcraft Part Code:  S-LSE-0.5X0.875X0.25IN-NBR Learn More

Shockcraft's internal seal kit for 28.6 mm Manitou SX & Mars forks Learn More

Shockcraft's internal seal kit for 28.6 mm Manitou Axel forks Learn More

Shockcraft's internal seal kit for 30 mm Manitou Black & Minute forks Learn More

Shockcraft's internal seal kit for 30 mm Manitou Xvert forks Learn More

Shockcraft's internal seal kit for 30 mm Manitou Splice forks Learn More

Shockcraft's internal seal kit for 32 mm Manitou Sherman, Nixon Elite & Minute forks Learn More

Shockcraft's internal seal kit for 32 mm Manitou Sherman, Nixon Elite & Minute forks This kit contains additional orings for the volume adjuster in SPV forks. Learn More

Shockcraft's internal seal kit for 32 mm Manitou Stance & Kingpin forks Learn More

SKF seal head upgrade/replacement for RockShox charger 1 dampers
Fits Pike, Lyrik & Boxxer forks, both RC & RCT3 with Charger 1
Upgrade for early Pike forks built with Trelleborg seal head.
Replacement part for seal head on later model Pike, Lyrik & Boxxer forks

SRAM Part Code: 11.4015.353.030 Learn More

Spare Pair of crush washer retainers for RockShox forks. Fits with 8mm crush washers Learn More

Full seal and o-ring kit to overhaul Dorado forks from 2009 onwards Manitou Part Code: 141-25995 Learn More

Seal kit (air) for Specialized 120 forks Kit includes all seals necessary for rebuild New Old Stock (NOS) Specialized Part Code: S202-0093 Learn More

Elastomer spring rod for repair of old school suspension forks.
Cut to length and drill if required.
Grade PU75A (comparable to Manitou 4 firm).
14.7mm diameter, 275mm minimum length.

Learn More

Elastomer spring rod for repair of old school suspension forks.
Cut to length and drill if required.
Grade PU60A (comparable to Manitou 4 medium).
14.7mm diameter, 310mm minimum length.

Learn More

FIT-CTD cartridge damper rebuild kit
Fits 2013-2015 FIT-CTD dampers in F32 and F34 forks with 8 mm shafts
Includes oring seals, replacement bladder and seal-head

Fox Part Code: 803-00-807 Learn More

FIT4 cartridge damper rebuild kit
Fits FIT4 dampers in F32 and F34 forks
Includes oring seals, replacement bladder and seal-head.

Fox Part Code: 803-00-960 Learn More

Shockcraft replacement seal kit for Manitou fork 27mm air pistons.
These are found in Manitou Nixon and Minute MARS forks.
Replacement for out of production seal kit 141-28131-K023
Fits pistons 141-25698 & 141-30416-K023

Shockcraft Part Code:  KS-MAN-27mm-AIRSEAL
Learn More

Application: Manitou DORADO forks 2008-2020
Kit includes o-rings & quad rings for TPC+ damper, Dorado Air Spring, IRT Air Spring O-rings and a travel check o-ring
Does not include wiper seals, fluids, valve core seal etc.  These are all available in our Dorado Fork Service Kit

PDF showing contents of kit is available here Learn More

Application: Manitou MARS forks 2001-2002
Kit includes o-rings & quad rings for TPC, Anti-Bob, Air side O-rings and a travel check o-ring
Does not include wiper seals, air piston, damper shaft seal etc.  They are all available in the bundle (available separately here for Mattoc/Mastodon/Magnum forks)

PDF showing contents of kit is available here Learn More

Application: Manitou Mattoc Expert
Kit includes o-rings & quad rings for MC2 dampers & Dorado Air springs, and a travel check o-ring
Does not include foot seals (available separately here for Mattoc/Mastodon/Magnum forks)

PDF showing contents of kit is available here

Learn More

Application: Manitou Mattoc Pro, Mastodon Pro, Magnum Pro
Kit includes o-rings & quad rings for MC2 dampers & Dorado Air spring (with IRT), and a travel check o-ring
Does not include foot seals (available separately here for Mattoc/Mastodon/Magnum forks)

PDF showing contents of kit is available here Learn More

Damper internal seal kit for Manitou EFC forks 1995 only
1996 EFC uses a different kit

Learn More

Damper internal seal kit for Manitou EFC, SX, SX-Ti, FS & FS-Ti forks 1996 to 1997 including Palmer Stroker

Learn More

Rebuild kit for Manitou Mezzer Pro 2020+
200H service for Pro version with cartridge MC^2 damper.
Includes wiper, damper and air seals.

Manitou Part Code:  141-36713-K026 Learn More