Shockcraft complete air seal kit to fit Fox FLOAT air shocks from 2000 onward This kit has been designed for a longer life Learn More

Replacement Internal Floating Piston (IFP) for Manitou McLeod rear shocks
Red version from 2016 Fits all Manitou McLeod dampers
Includes quad-ring seal (-116)
Manitou Part Code: 126-29522

Learn More

Complete seal kit (air sleeve and damper) for Manitou radium rear shocks
This version is for 43 mm ID air-cans, measuring 46 mm OD
Kit contains wiper seal, air-can quad ring, air can to cap oring, travel check oring damper shaft and cap seals, rebound knob seal and detent ball

Learn More

Complete seal kit (air sleeve and damper) for Manitou radium LRS rear shocks used on Merida bikes
35 mm ID air-can, both SPV and remote lockout versions
Kit contains wiper seal, air-can quad ring, air can to cap oring, travel check oring damper shaft and cap seals, rebound knob seal and detent ball

Learn More

Complete seal kit (air sleeve and damper) for Manitou radium rear shocks with lockout lever
This version is for 40 mm ID air-cans, measuring 43 mm OD
Kit contains air can seals, damper seals, rebound knob seals & detent ball plus lockout lever seals & detent ball

Learn More

Complete seal kit (air sleeve and damper) for Manitou radium rear shocks with lockout lever
This version is for 43 mm ID air-cans, measuring 46 mm OD
Kit contains air can seals, damper seals, lockout lever seals and detent balls for rebound and lockout

Learn More

SRAM Part Code: 00.4315.032.370 Learn More

200 Hour service kit for Rockshox Super Deluxe A1 shock SRAM Part Code: 00.4315.032.617 Learn More

RockShox SVC KI AUTOSAG Can Seal Kit (SRAM)

Air-can service kit to fit RockShox Monarch shocks with Autosag fitted to Specialized bikes.
Includes backup rings, quad-rings, o-rings and assembly lubrication.

SRAM Part Code: 00.4315.032.480 Learn More

Air spring rebuild kit for Cane Creek Double Barrel rear shocks
Kit includes air can seals and seals & backup rings for air piston & seal head
Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent
Cane Creek Part Code: BAD0241

Learn More

Includes air can seals, spacer & grease for air can service SRAM Part Code: 00.4315.032.220 Learn More

50 Hour service kit for RockShox Deluxe and Super Deluxe A1 shocks
Contains air can seals, air can wiper seals, assembly grease and oil sachet
SRAM Part Code: 00.4315.032.615

Learn More

Fits DT Swiss M210 rear shocks Learn More

Air spring rebuild kit for Cane Creek Double Barrel rear shocks
Kit includes air can seals and seals & backup rings for air piston & seal head
Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent
Cane Creek Part Code: BAD0241

Learn More

Complete seal kit (air sleeve and damper) for Manitou radium rear shocks without lockout lever
This version is for 40 mm ID air-cans, measuring 43 mm OD
Kit contains air can seals, damper seals, rebound knob seals and rebound knob detent ball

Learn More

Air spring rebuild kit for Cane Creek Double Barrel Inline Air Spring Rebuild Kit
Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent
Cane Creek Part Code: BAD1185

Learn More

Contains new shaft seal, shaft wiper & shaft bushing Fits older Fox Vanilla/Vanilla R/RX/RC/TC shocks with 3/8" (9.53 mm) shafts Aftermarket kit supplied by Shockcraft Learn More

Air can seals for Manitou McLeod rear shocks
Fit single and dual (king) can
Kit includes quad ring, wiper seal, top-out bumper, glide rings and backup ring
Manitou Part Code: 142-31535-K002
Additional static seals for the outer layer of the dual (king) can are available here

Learn More

Shockcraft air can seal kit for Specialized 2008 Enduro AFR shocks Learn More

Fits DT Swiss M212 & X313 rear shocks Learn More

27.3 x 35 x 3.5/5 mm Wiper seal (Manitou)
Fits Manitou Swinger Air, Radium, LRS, S-Type, etc rear shocks
Also fits some DT, Kona and Lapierre branded rear shocks.

Manitou P/N 83-2720

Learn More

Fits all Fox Float rear shocks from model year 2000 onward
Genuine Fox kit.
Fox Part Number 803-00-142 Learn More

Complete rebuild seal kit for Manitou McLeod rear shocks Fits single-can and king-can (dual can) Manitou Part Code: 142-31535-K001 Learn More

Replacement seals for Manitou McLeod rear shock dual air can This is a secondary kit with seals for outer sleeve only and does not include main air seals Manitou Part Code: 142-31535-K035 Learn More

Revox coil shock (14 mm shaft) seal kit with bumper & glide ring Manitou Part Code: 142-27330 Learn More