Fork RL2 Damper seal kit 2 Pieces Damper for X-Fusion 32 mm stanchioned forks

X-Fusion 2022 Part Code: 42-XFKCVTRL-DMP-301
X-Fusion Old Part Code: 42-SSFCVTRL-DMP-301 Learn More

Rebound knob with screw for RL2 32 mm X-Fusion forks with the C-type damper, including Streat, Slide and Velvet

X-Fusion 2022 Part Code: 42-XFKSDR0-KNOB-601
X-Fusion Old Part Code: 42-SSFSDR0-KNOB-601 Learn More

ABS+ compression damper kit to upgrade Manitou 32 mm forks (Minute/Marvel/Machete/Drake/Circus/Tower).
Includes damper and machined aluminium knob with retainer screws.
Pro level with aluminium knobs and piston.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston; does not fit 2020+ R7 or Machete forks (ABS+ damper 141-38117-K029 fits these forks)
Tune: ABS+ production XC stack (CV-11411-03).  Fully tunable and re-valvable to fit any rider weight or terrain.

Shim kit and revalving instructions here.

Manitou Part Code: 141-26532-K013

Learn More

Platform compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated platform with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3294

NOTE:  This is not ABS+.  It does not use shim stacks and is not revalvable.

Learn More

Lockout compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3144

Learn More

Minute/Marvel/Tower/Machete Pro 120 mm cartridge rebound damper
Cartridge rebound damper assembly with 16 mm piston and reduced oil volume/weight
Used in Pro models
100-120mm travel only
29" wheel only
Manitou Part Code: 141-29090-K006

Learn More

32mm Pro 29" 140 mm Cartridge Rebound Damper (Manitou)
Fits Manitou Minute Pro forks with 140mm travel 29" wheel.


Manitou Part Code: 141-29090-K007 Learn More

32mm rebound damper assembly 100-145mm.
Fits Machete JUNIT 24" 2019+, R7 Expert & Machete Comp 2021+

Manitou Part Code: 141-36683-K008 Learn More

32mm RL Damper Upper & Lower Half(2018 VT/ST/SD/X32)

X-Fusion 2022 Part Code: 42-XFKDSTRL-140-601
X-Fusion Old Part Code: 42-SSFDSTRL-140-601 Learn More

TPC compression damper assembly for 2008+ Minute/Tower/Drake etc
Shim stack piston with adjustable LSC (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3143

Learn More

Rebound knob with screw for RL 34 mm X-Fusion forks

X-Fusion 2022 Part Code: 42-XFKSWR0-KNOB-601
X-Fusion Old Part Code: 42-SSFSWR0-KNOB-601 Learn More

34 mm RL damper cartridge for X-Fusion Slant, Sweep, Trace and McQueen forks

X-Fusion 2022 Part Code: 42-XFKDSWRL-160-801
X-Fusion Old Part Code: 42-SSFDSWRL-160-801 Learn More

Fork Roughcut HLR Damper Bladder Rubber kit for X-Fusion 34 mm stanchioned forks

X-Fusion 2022 Part Code: 42-XFKSWHLR-DMP-601
X-Fusion Old Part Code: 42-SSFSWHLR-DMP-601 Learn More

34 mm Roughcut HLR Damper Cartridge (X-Fusion)

X-Fusion 2022 Part Code: 42-XFKDSWHLR-160-601
X-Fusion Old Part Code: 42-SSFDSWHLR-160-601 Learn More

High and low speed compression adjuster knobs & screws for X-Fusion Vengeance HLR forks

X-Fusion 2022 Part Code: 42-XFKVGHLR-KNOB-301
X-Fusion Old Part Code: 42-SSFVGHLR-KNOB-301 Learn More

Fork Roughcut HLR Damper Bladder Rubber kit for X-Fusion 36 mm stanchioned forks X-Fusion 2022 Part Code: 42-XFKDMTHLR-DMP-601 X-Fusion Old Part Code: 42-SSFDMTHLR-DMP-601 Learn More

36 mm Roughcut HLR Damper Cartridge for Metric (X-Fusion)

X-Fusion 2022 Part Code: 42-XFKDMTHLR-180-601
X-Fusion Old Part Code: 42-SSFDMTHLR-180-601 Learn More

36 mm Roughcut HLR Damper Cartridge for RV1 (X-Fusion)

X-Fusion 2022 Part Code: 42-XFKDRVHLR-200-601
X-Fusion Old Part Code: 42-SSFDRVHLR-200-601 Learn More

ABS+ Fork compression damper Minute MRD, with alloy knob.
16mm piston for lightweight MRD damper only.

Manitou Part Code: 141-26532-K005 Learn More

ABS+ Fork compression damper kit for Minute/Marvel Expert.
Fits most 32mm Manitou forks from 2007-2019.
M30x1.0 cap threads, red aluminium piston & knob.  Easily tuned.

Manitou Part Code: 141-26532-K010

Learn More

ABS+ damper kit to upgrade Manitou Circus Comp 32 mm jump forks with steel legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Gold anodised alloy piston is 29mm OD (excluding oring) and only fits the chromed steel legs, it will not fit alloy stanchion forks.
Jump tune features a lot of compression damping.
Fitment: M30 x 1.0 mm cap threads, 29 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K006

Learn More

ABS+ damper kit for Manitou Circus Expert 32 mm jump forks with alloy legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Red alloy piston is 28mm OD (excluding oring) and fits fits the majority of Minute, Marvel, Machete and Circus Expert forks.
Fitment: M30 x 1.0 mm cap threads, 28 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K007 Learn More

ABS+ Compression damper kit for Manitou M30 & Markhor forks.  Also fits R7 and some BLACK models.
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Lower priced alternative to R7 ABS+

Manitou Part Code: HB-141-32556-K001

Learn More

ABS+ compression damper kit to fit Manitou J-Unit Machete 20" forks.
Includes damper and plastic adjuster knob with retainer screws.
Comp level with pastic knobs and damper piston.
Shorter length than usual 32mm ABS+ dampers.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: J-unit Kids.  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-36683-K009 Learn More

ABS+ compression damper kit to upgrade Manitou 32 mm forks (Minute/Marvel/Machete/Drake/Circus/Tower).
Includes damper and moulded plastic with retainer screws and index balls/springs.
Comp level with plastic knobs and piston.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: ABS+ production XC stack (CV-11411-03).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K002  Superceded by Manitou Part Code: 141-31938-K002

Learn More