Historic Manitou Forks

29" 120 mm Manitou Machete Pro
15 x 100 mm Hexlock SL axle
ISO Air spring with negative coil
ABS+ fully tuneable compression damper
1.5" tapered steerer

The Machete supersedes the Manitou Marvel and Minute forks, maintaining strong performance, impressive reliability and upgradability in Manitou's 32 mm chassis.

Learn More

Discontinued fork. Contact us for parts and service.

Fits officially 27 x 2.6" tyres (unofficially many people are running 2.8")
1.5" tapered steerer.
15 x 110 mm Boost front axle with single tool removal (6 mm hex key)
180 mm post mount brake fitting
MC^2 damper with adjustable HSC, LSC &  LSR
Externally adjustable hydraulic bottom out
IRT dual positive chamber air spring with self balancing negative
Bolt on front and rear facing mud-guard (photo is 2018 version).
Stealth stickers included in box.

Updates From 2018:
Stronger crown with thicker wall steerer and stanchions to prevent noise.
New fender (mud guard) which extends forwards under the arch

Shockcraft Options:
170mm travel (no cost internal configuration).
Travel reduction (requires purchase of spacers).
High flow damper piston for better rock eating performance.
Shockcraft Hot Ois for better high temp and cold weather use.

Magazine Review:
Check out NZMTBR's review of the Mattoc Pro Boost.

Learn More

Machete CSA Boost 27.5+/29" 130-140 1.5T MB (Manitou)
Boost 32mm tubes 340  mm long with M30x1.0 threads top and bottom.
Comp level with 6000 series tapered stanchions and hollow crown
1.5" tapered steerer and all black

Manitou Part Code: 141-33396-K002 Learn More

Machete CSA Boost 27.5+/29" 90-120 1.5T MB (Manitou)
Boost 32mm tubes 320 mm long with M30x1.0 threads top and bottom.
Comp level with 6000 series tapered stanchions and hollow crown
1.5" tapered steerer and all black

Manitou Part Code: 141-33396-K001

Learn More

Discontinued fork. Contact us for parts and service.

Manitou Dorado - updated for 2020
27" or 29" 203 mm travel (adjustable to 180 mm internally)
36 mm stanchions on an upside down chassis
Boost 20 x 110 mm Hexlock axle (tooled)
TPC+ Cartridge Damper with external HSC, LSC and LSR adjusters
Dorado Air spring with travel internally configurable 203-180 mm

Manitou Part Code: 191-35787-A001

Learn More

Discontinued fork. Contact us for parts and service.

27+ 120-140 mm Manitou Magnum Pro forks
15 x 110 mm QR Hexlock axle (Boost)
Dorado Air spring system
MC² Cartridge Damper
1.5" tapered steerer

The Manitou Magnum takes all that is good from the groundbreaking Manitou Mattoc and packages it in an oversized form.

Learn More

Discontinued fork. Contact us for parts and service.

26", 27" or 29" 80-120 mm Manitou Marvel Pro forks
15 x 100 mm QR axle (9 x 100 mm QR axle available through Shockcraft custom fork programme)
ISO Air spring system
TPC Cartridge Damper with ABS+ XC tune compression damper
1 1/8" aluminium or 1.5" taper steerer

It’s a tough name to live up to. When it comes to XC - it’s all about efficiency. The hole shot, cleaning lines with precision, climbing like a goat and descending like a river. Not to mention being able to custom tune the thing with as little effort as possible.

The Marvel - is a marvel.  Rebound, damping and lockout is all external, and the stiffness will point the front wheel where you need it to go.

Learn More

Discontinued fork. Contact us for parts and service.

29+ 120 mm Manitou Magnum Pro forks
15 x110 mm QR Hexlock axle (Boost)
Dorado Air spring system
MC² Cartridge Damper
1.5" tapered steerer

The Manitou Magnum takes all that is good from the groundbreaking Manitou Mattoc and packages it in an oversized form.

Learn More

29+ 120-140 mm Manitou Machete forks
15 x 110 mm Hexlock SL tooled axle (Boost)
TS Air spring
Kwik Toggle 2 Position On/Off Damper
1.5" tapered steerer

Machete is Manitou's answer to the call for a lightweight, cost-conscious performance Boost fork.  Incorporating the versatile Manitou Absolute+ compression damping, tried-and-true TPC rebound, Hexlock SL 15mm axle and patented Manitou hollow crown technology, a Machete is all you need to survive in the wild.

Learn More

27.5" 180-203 mm Manitou Dorado Pro
20 mm hex axle
Dorado Air spring system
TPC+ Cartridge Damper
Dual Crown 1 1/8" aluminium steerer

The legendary World Cup downhill and big mountain fork, now with standard Incremental Volume Adjust (IVA) and Trail Side Relief (TSR) pressure release. Welcome to glory!

The Dorado Pro is an engineering masterpiece. 7050 legs, inverted construction, dual-chamber air spring, TPC+ damping (with independent high- and low-speed compression), hydraulic bottom-out and top-out, and Manitou’s patented HexLock 20 mm thru-axle add up to the most advanced downhill fork ever.

Available direct from Shockcraft or via your local bike shop

Learn More

Discontinued fork. Contact us for parts and service.

27" 160 mm Manitou Mattoc Pro 2 forks
15 x 100 mm Hexlock SL tooled axle
DH Air (Dorado) spring
MC² Cartridge Damper
IVA (Incremental Volume Adjust) spacer system
1.5" tapered steerer
Internally convertible to 26" and 170 mm travel
Available in matte red, matte black or gloss white

Learn More

OEM Only

27" 160 mm Manitou Mattoc Comp forks
QR15 x 100 mm Hexlock axle
DH Air (Dorado) spring
ABS+ Trail Tuned Damper
1.5" tapered steerer
Internally convertible to 26" and 170 mm travel
Colours depend on bike brand

Only available bolted to a brand new bike

Learn More

27" 180-203 mm Manitou Dorado Expert
20 mm hex axle
Dorado Air spring system
TPC+ Cartridge Damper
Dual Crown 1 1/8" aluminium steerer

The legendary World Cup downhill and big mountain fork, now with standard Incremental Volume Adjust (IVA) and Trail Side Relief (TSR) pressure release. Welcome to glory!

The Dorado's inverted construction, dual-chamber air spring, TPC+ damping (with independent high- and low-speed compression), hydraulic bottom-out and top-out, and Manitou’s patented HexLock 20mm thru-axle add up to the most advanced downhill fork ever. The Dorado Expert has the same specifications as the Dorado Pro, except with Aluminium legs instead of the Pro's stiffer and stronger 7050 Aluminium.

Learn More

Discontinued fork. Contact us for parts and service.

2018 Manitou Mattoc Pro forks
27" 160 mm
15 x 100 mm Hexlock SL tooled axle
DH Air (Dorado) spring with IRT (Infinite Rate Tune) Dual Chamber factory installed
MC² Cartridge Damper with external HSC & LSC rebound & HBO adjusters
1.5" tapered steerer
Internally convertible to 26" and 170 mm travel
Matte red or matte black

Learn More

Discontinued fork. Contact us for parts and service.

2018 Manitou Mattoc Pro Boost forks
27+/29" 140 mm
15 x 110 mm Hexlock SL tooled axle
DH Air (Dorado) spring with IRT (Infinite Rate Tune) Dual Chamber factory installed
MC² Cartridge Damper with external HSC & LSC rebound & HBO adjusters
1.5" tapered steerer
Travel Internally reducable in 10 mm increments
Matte black

Learn More

Discontinued fork. Contact us for parts and service.

2018 Manitou Mattoc Pro Boost forks
29+ 120 mm
15 x 110 mm Hexlock SL tooled axle
DH Air (Dorado) spring with IRT (Infinite Rate Tune) Dual Chamber factory installed
MC² Cartridge Damper with external HSC & LSC rebound & HBO adjusters
1.5" tapered steerer
Travel Internally reducable in 10 mm increments
Matte black

Learn More

27" (27.5" 650B) 100-120 mm Manitou Machete Comp
9 x 100 mm QR axle
TS Air spring with negative coil
Kwik Toggle 2 Position On/Off Damper
1 1/8" straight or 1.5" tapered steerer options

The Machete supersedes the Manitou Marvel and Minute forks, maintaining strong performance, impressive reliability and upgradability in Manitou's 32 mm chassis.

Learn More

29" 100-120 mm Manitou Machete Comp
9 x 100 mm QR axle
TS Air spring with negative coil
Kwik Toggle 2 Position On/Off Damper
1 1/8" straight or 1.5" tapered steerer options

The Machete supersedes the Manitou Marvel and Minute forks, maintaining strong performance, impressive reliability and upgradability in Manitou's 32 mm chassis.

Learn More

29" 100-120 mm Manitou Machete Pro
15 x 100 mm Hexlock SL axle
ISO Air spring with negative coil
ABS+ fully tuneable compression damper
1.5" tapered steerer only

The Machete supersedes the Manitou Marvel and Minute forks, maintaining strong performance, impressive reliability and upgradability in Manitou's 32 mm chassis.

Learn More

27" (27.5" 650B) 100-120 mm Manitou Machete Pro
15 x 100 mm Hexlock SL axle
ISO Air spring with negative coil
ABS+ fully tuneable compression damper
1.5" tapered steerer only

The Machete supersedes the Manitou Marvel and Minute forks, maintaining strong performance, impressive reliability and upgradability in Manitou's 32 mm chassis.

Learn More

Discontinued fork. Contact us for parts and service.

26" 160 mm Mattoc Pro (top of the line) in black
Internally convertable from 140-170 mm (26") and 140-160 mm (27")
1.5" tapered steerer
15 mm QR Hexlock axle

The most tunable and best performing single crown fork on the market
External HSC, LSC, LSR, HBO and air pressure

Learn More

Rebirth of an Icon

The Manitou R7 has a vast history of combining a lightweight chassis with performance and reliability. And this latest incarnation of the icon is no different. The new R7 Expert pairs superior damping thanks to Manitou's 3 position dual piston VTT damper with a lightweight and stiff 32 mm chassis. Learn More

Down-for-Whatever

Light enough to please the weight weenies, stiff enough to smash the jump lines, and reliable enough to do it every day of the week.

The all new Manitou R7 Pro is down for whatever.

This is the 27.5" 37 mm offset version of the R7 Pro.

Available for order ex-USA.  Contact us for availability. Learn More

The Machete JUnit Expert is a high performance suspension fork for 20" and 24" wheeled bikes, bringing performance, speed and safety to younger riders.

Both 20" and 24" fork sizes have air springs and dampers tuned for lightweight riders with infinitely tunable air springs and fully revalvable ABS+ dampers.

The JUnit Expert features a 1.5” tapered alloy steerer tube and a forged hollow crown. Thirty-two millimeter, 6000 series black anodized stanchions are completed with Manitou’s signature Reverse Arch.  Lightweight riders benefit from the easily adjustable Expert Air spring system, adjustable rebound, and Manitou's proven ABS+ damper.

20" Machete JUnit Expert is also available for fitment to cargo bikes (details here).

Available for order now.  If not in stock please contact us and we can advise ETA.

1.5" headset lower cup assembly available to adapt Scott Roxter, Trek Roscoe, Avanti Montari and other bikes to fit the tapered steerer of the Manitou JUnit Machete.
Choose either the Premium version of the 1.5" headset lower cup assembly (with stainless steel bearings) or non-premium (chromium bearings)

Learn More

27+/29" 120-140 mm Manitou Machete forks
15 x 110 mm Hexlock SL tooled axle (Boost)
TS Air spring
Kwik Toggle 2 Position On/Off Damper
1.5" tapered steerer

Machete is Manitou's answer to the call for a lightweight, cost-conscious performance Boost fork.  Incorporating the versatile Manitou Absolute+ compression damping, tried-and-true TPC rebound, Hexlock SL 15mm axle and patented Manitou hollow crown technology, a Machete is all you need to survive in the wild.

Learn More