We are OPEN
Click here for updates on our current status.

 

Manitou Magnum

Click on your Manitou Magnum model for information on your fork along with service, tuning & upgrade options and replacement/service parts.

We can service, tune or upgrade your Manitou Magnum fork - book it in here.

Set Descending Direction

1-25 of 26

Page:
  1. 1
  2. 2
  1. Clamp block for servicing Manitou single crown fork dampers
    Designed and manufactured by Shockcraft
    CNC machined from aluminium for a solid clamp with no scratching
    5 clamp sizes - 8 to 22.2 mm

    Shockcraft Part Code:  SC-CLAMP-MAN-SC-V1 Learn More
  2. Fork Bushing Burnishing (Shockcraft)

    From: US$28.46

    To: US$41.11

    Final sizing and tolerancing of fork bushings to ensure minimal friction and maximum performance.  Cures issue of friction and stiction to improve small bump control.  Also reduces break-in time of a new fork to zero.
    Burnish sizes are carefully chosen to provide maximum oil film thickness without any knocking or noticable play.

    Available immediately for 30 mm, 32 mm, 34 mm, 35 mm and 36 mm forks.  Other sizes will have a slight delay as we manufacture tooling.

    Learn More
  3. Motorex 2.5 wt fork oil - 15 cSt @ 40°C

    Available in 250 ml or 1 L bottles
    Also available at a lower price in 1 & 4 litre refilled bottles

    Learn More
  4. Motorex 4 wt fork oil
    16 cSt @ 40°C

    Fox Racing Shox use Motorex 4wt oil in its MY21 DHX2 and FLOAT X2 shocks

    Available in 250 ml or 1 L bottles

    Learn More
  5. Try our simple fork oil selection charts to find out which oil you need for your brand of fork, terrain, climate and riding. Learn More
  6. Fork Service Kit for Manitou 34 mm Forks

    From: US$1.90

    To: US$399.99

    Fork service kit containing fork seal kit, internal seal kit, fork oil, bushing lubricant, Slickoleum assembly grease and oil syringe Learn More
  7. Motorex Fully Synthetic lubricating oil for air pistons and suspension forks lower leg bushings.
    Manitou use this exact oil as Semi-Bath fork lubrication.

    Specifications:
    5W40 grade
    88 cSt @ 40C
    Pour Point <-50C

    This is a slightly less awesome lubricant than Motorex Supergliss but works over a wider temperature range and is better in the cold.

    Learn More
  8. Hexlock SL Installation Tool (Manitou)

    US$59.60

    Available on backorder

    Tool for installing and removing captive bolt retainer on Manitou Hexlock SL equipped forks Fits 1/4" driver Manitou Part Code: 141-33397 Learn More
  9. Exchange Shockcraft modified High Flow piston
    Only choose this option if you are buying a new rebound damper assembly, fork or have your fork in for service at Shockcraft
    It is lower cost as you already own the piston

    Fits Manitou Mattoc Pro, Magnum Pro, Mastodon Pro, Minute Pro, Machete Pro etc.
    This piston greatly increases oil flow on sharp impacts and on very rough ground at speed, increasing reaction speed, removing high speed harshness and allowing more compression damping to be run
    Blue aluminium with PTFE glide-ring 16 mm OD
    Part Code: 126-27209HF-EX

    Click here if you would like to buy a High Flow piston outright (i.e. don't have one to exchange)

    Learn More
  10. Shockcraft modified High Flow piston (rebound & mid valve) for Pro level forks with cartridge rebound
    Fits Manitou Mattoc Pro, Magnum Pro, Mastodon Pro, Minute Pro, Machete Pro etc.
    This piston greatly increases oil flow on sharp impacts and on very rough ground at speed, increasing reaction speed, removing high speed harshness and allowing more compression damping to be run
    Blue aluminium with PTFE glide-ring 16 mm OD
    Part Code: 126-27209HF

    Exchange high flow pistons also available

    Learn More
  11. Hot Oil Pink 250 cc for rear shocks and fork cartridge dampers
    14 cSt @ 40°C

    Learn More
  12. Manitou Part Code: 141-32155-K002 Learn More
  13. Kit includes 2 high quality Trelleborg seals, 2 foam rings and Slickoleum grease.
    Fits 34 mm stanchioned Manitou forks from 2006 to present.
    Flanged type for 44mm pocket.
    Special compound for low friction & extreme low temperature performance

    Manitou Part Code: 141-34000
    Replaces Part Numbers 141-30996-K007 & 83-2969

    Learn More
  14. Lower leg & air spring service pricing for Manitou Magnum 2017
    Includes labour, consumables and fluids
    Excludes wiper seals, repairs & repair parts

    Select special service & upgrade options to view pricing Learn More
  15. Full service pricing for Manitou Magnum 2017
    Includes labour, consumables and fluids
    Excludes wiper seals, repairs & repair parts

    Select special service, upgrade & tuning options to view pricing Learn More
  16. Application: Manitou Mattoc Pro, Mastodon Pro, Magnum Pro
    Kit includes o-rings & quad rings for MC2 dampers & Dorado Air spring (with IRT), and a travel check o-ring
    Does not include foot seals (available separately here for Mattoc/Mastodon/Magnum forks)

    PDF showing contents of kit is available here Learn More
  17. 31 mm Pro and Expert piston assembly with seal and Slickoleum assembly grease
    Replacement air piston for Manitou Mattoc, Magnum (2015-17) & Mastodon forks with Dorado Air spring system (valve underneath by axle)
    Upgrade air piston for 2014 Mattoc forks which had the piston with the single white glide-ring
    Manitou Part Code: 141-30996-K023

    Learn More
  18. Mattoc/Magnum IRT Upgrade Kit (Manitou)

    US$117.79

    Last One Left

    IRT: Infinite Rate Tune
    Adds a second air chamber for independent tuning of mid-end stroke.
    Coarse thread M32x1.0mm for 2014-2019 Mattoc, Magnum, Mastodon Pro and Expert level forks.
    Manitou Part Code: 141-32668-K003 Learn More
  19. Three piece tool kit for servicing all Manitou Mattoc & Magnum forks
    Manitou Part Code: 172-31133 Learn More
  20. Replacement rebound knob & air cap for Manitou Mezzer, Mattoc or Magnum Pro forks
    Includes rebound knob mounting screw
    Manitou Part Code: 141-32155-K016

    Learn More
  21. Modified 8 mm Socket

    US$19.57

    In stock

    Custom 8 mm deep socket to fit compression rod in Manitou Mattoc/Magnum 2015 & Later forks Chrome Vanadium 1/4'' drive fitting 49 mm length Learn More
  22. Seal Press Tool 32 & 34 mm (RWC)

    US$105.74

    Last One Left

    Double ended tool for pressing wiper seals into 32 or 34 mm stanchioned forks
    Works with both flanged and flangeless wiper seals
    Designed & tested to work with SKF flangeless seals
    Keeps seals straight and sets depth flush with top of fork casting in one hit
    Prevents damage to seals and forks
    Manufactured by Real World Cycling (RWC) Learn More
  23. 15 ounce tub of Slickoleum assembly grease Learn More
  24. 4 ounce tube of Slickoleum assembly grease Learn More
  25. 5 g squeeze tube of Slickoleum assembly grease Learn More

Set Descending Direction

1-25 of 26

Page:
  1. 1
  2. 2