Custom 8 mm deep socket to fit compression rod in Manitou Mattoc/Magnum 2015 & Later forks Chrome Vanadium 1/4'' drive fitting 49 mm length Learn More

Tool for easy removal of bearing cups, without damage, from Fox Float DPS & DPX2 rear shocks fitted with first generation 30 x 8 mm ball bearing cups
No more screwdrivers! Learn More

Clamp block for servicing Fox & RockShox Micro Brain rear shocks
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
4 clamp sizes - 12 to 27 mm

Shockcraft Part Code: SC-CLAMP-SPEC-MICROBRAIN-V1 Learn More

Clamp block for servicing Specialized Command Post dropper posts
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
2 clamp sizes - 24.4 & 36.3 mm

Shockcraft Part Code:  SC-CLAMP-SPEC-COMMAND-V1 Learn More

Clamp block for servicing RockShox Reverb dropper Posts
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
4 clamp sizes - 7 to 31.6 mm

Shockcraft Part Code:  SC-CLAMP-RS-REVERB-V1 Learn More

Clamp block for servicing Manitou single crown fork dampers
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
5 clamp sizes - 8 to 22.2 mm

Shockcraft Part Code:  SC-CLAMP-MAN-SC-V1 Learn More

Clamp block for servicing Fox Float & DPS inline rear shocks
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
4 clamp sizes - 9 to 40.4 mm for air-can and damper.

Shockcraft Part Code:  SC-CLAMP-FOX-FLOAT-V1 Learn More

Clamp block for servicing Fox FIT4, GRIP & GRIP 2 fork dampers
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
5 clamp sizes - 8 to 22.5 mm

Shockcraft Part Code:  SC-CLAMP-FOX-FITGRIP-V1 Learn More

Clamp block universal for suspension servicing
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
7 clamp sizes - 8 mm, 9 mm, 3/8", 10 mm, 12 mm, 1/2" and 14 mm

Shockcraft Part Code:  SC-CLAMP-UNIVERSAL-8-14-V1

Learn More

Clamp block for servicing RockShox Charger 1-2.1 fork dampers
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
6 clamp sizes - 9 to 22.2 mm

Shockcraft Part Code:  SC-CLAMP-RS-CHARGER-1-2.1-V1 Learn More

Shockcraft designed Dyno Probe Mount for 3D printing
Fits Roehrig or CTW dyno with 31.8mm stanchion and 19mm probe casing.
Product is one 3D STL geometry file for use with 3D printers.
Mounts with o-rings for fast and easy repositioning

Shockcraft Part Code: SC-DD-PROBEMOUNT-31.8X19

Learn More

Shockcraft designed & Manufactured Dyno Probe Mounting Clip
Fits Roehrig & CTW dyno with 31.8mm (1.25") stanchion and 19mm (3/4") probe casing.
Product is one 3D printed clip in green.
Mounts with o-rings for fast and easy repositioniong

Shockcraft Part Code: SC-PROBEMOUNT-31.8X19

Learn More

Shockcraft designed & Manufactured Dyno Probe Mounting Clip
Fits Laba 7 dyno with 40mm stanchion and 25mm probe casing.
Product is one 3D printed clip in green.
Mounts with o-rings for fast and easy repositioniong

Shockcraft Part Code: SC-PROBEMOUNT-40X25

Learn More

Shockcraft designed & manufactured fork mounting clips
Fits all forks with straight or tapered 1.125" (28.6mm) steerer tubes
Does not fit Giant 1.25" (31.8 mm) forks
Product is one set of 3D printed clips in black
Mounts with 3 x 8 gauge (4.2 mm) 50 mm CSK screws from the front or 12 gauge (5.6 mm) self tapping screws from the back (Screws not included in set)

Shockcraft Part Code: SC-FORKMOUNT-BLK Learn More

Shockcraft designed Dyno Probe Mount for 3D printing
Fits Laba 7 dyno with 40mm stanchion and 25mm probe casing.
Product is one 3D STL geometry file for use with 3D printers.
Mounts with o-rings for fast and easy repositioniong

Shockcraft Part Code: SC-DD-PROBEMOUNT-40X25

Learn More

Shockcraft designed Fork Mounting System for 3D printing
Fits all forks with straight or tapered 1.125" (28.6mm) steerer tubes.  Does not fit Giant 1.25" (31.8mm) forks
Product is one pair of 3D STL geometry files for use with 3D printers.
Mounts with 3x 8 gauge (4.2mm) 50mm CSK screws from the front or 12 gauge (5.6mm) self tapping screws from the back.

Shockcraft Part Code: SC-DD-FORKMOUNT

Learn More

Clamp block for servicing Manitou Dorado 2009+ forks
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
5 clamp sizes - 8 to 26.5 mm

Shockcraft Part Code:  SC-CLAMP-MAN-DORADO-V1 Learn More