Can be trimmed down in length to replace the lower sliding bushing in Reverb seat-posts Learn More

Normally you book your fork, shock or dropper post for a Shockcraft service and send it when you can.  We service parts in the order that they arrive.  In busy times this can mean up to two weeks with a bike in pieces and no riding.

With our new Book Now, Send Later option you can keep your place in the queue and we tell you when we need your fork, shock or dropper.  Use our Carrier Kereru (Pigeon) Pickup service and we'll organise courier collection.  This can bypass much of the downtime. Learn More

The nature and cost of service depends on the specific dropper post model, it's unique issues and prior maintenance schedule.

If you're not sure what type of service is required please contact us or we can make a recommendation after inspection of the dropper post.  Repair work is additional to a normal service.  We will always call and discuss before proceeding with any repair work.

These rates are for labour only and exclude repair.
Parts, oil & freight are additional and vary depending on the brand & model and the problems found.

Learn More

Cane Creek Part Code: BAE0050 Learn More

Fits X-Fusion Hilo 100 mm seatposts with 22 mm shaft X-Fusion Part Code: 42-HILOSEAL-101 Learn More

Fits X-Fusion Hilo 100/125 mm seatposts with 25 mm shaft X-Fusion Part Code: 42-HILOSEAL-201 Learn More

O-ring black nitrile rubber - sold individually.
Appearance is matte black
Standard compound for static and dynamic seals
N90 code is a harder grade
Measurements are internal diameter and cross section width.

Learn More

O-ring Polyurethane - sold individually.
Appearance is clear to light brown
Tougher than black nitrile rubber
90 is a harder compound than 70
Measurements are internal diameter and cross section width. Learn More

Quad-ring black nitrile rubber - sold individually.
Appearance is matte black
Standard compound for static and dynamic seals
Measurements are internal diameter and cross section width. Learn More

Full mineral oil bleed kit For all RockShox Reverb dropper posts Kit includes 120 ml hydraulic fluid, two syringes and tubes with M5 fittings SRAM Part Code: 00.4318.007.001 Learn More

Fits Reverb and X-Lock hoses at lever end.

SRAM Part Code: 11.6815.022.030 Learn More

Fits RockShox Reverb & Reverb Stealth B1 seatposts
Includes foam ring, inner sealhead bushing & o-rings
SRAM Part Code: 11.6818.031.000 Learn More

Fits RockShox Reverb A1 seat posts (not Reverb Stealth)
SRAM Part Code: 11.6818.003.010 Learn More

Fits Reverb A2 dropper posts
Non stealth models with external hose.
Includes new seal heads, bushings, internal seals and  upgraded IFP

SRAM Part Code: 11.6818.031.005

Learn More

Kit with seals, oil, grease, tools & lower bushing to service RockShox Reverb and Reverb Stealth seat posts

Internal seal kit includes main o-rings that need replaced during a service
Alternative to obsolete SRAM kit 11.6815.031.000
A1 Reverb uses 9.1 x 3.5 mm o-ring for main shaft seal
A2 & B1 replace 10x15 x4 mm cup seal on main shaft with 10 x 3 mm o-ring (included in kit) to reduce air intrusion

Lower bushing is either genuine RockShox glacier type or IGUS, which needs trimmed to fit

Click on related products below for detail on tools

Learn More

Rockshox Reverb & Stealth lower bushing.
Single bushing with o-ring to fit Reverb Reverb Stealth dropper posts
Installs into cartridge end-cap for service or repair.

SRAM Part Code: 11.6818.035.007 Learn More

Rockshox Reverb & Stealth cartridge end-cap.
Coarse thread version for A1 and A2 models.
Fits RockShox Reverb & Reverb Stealth up to 2016 (A1 & A2)
Includes inner and outer seals with lower bushing.

SRAM Part Code: 11.6818.017.020 Learn More

Connectamajig collar
Fits remotes for Reverb & Reverb Stealth dropper posts
SRAM Part Code: 11.4318.005.000 Learn More

Fits RockShox Reverb Stealth seat posts
Includes hose with crimped on Connectamajig fitting and barb fitting for the lever end
Hose length 2000 mm

For non Connectamajig posts use 11.6815.025.030

SRAM Part Code: 11.6815.025.030 Learn More

Fits all Reverb & Reverb Stealth dropper posts
SRAM Part Code: 11.6815.022.010 Learn More

Rockshox Reverb Hose Kit.
Fits all RockShox Reverb & Reverb Stealth dropper posts
Includes new hose, strain relief & barb end fittings
Hose length 2000 mm

For Connectamajig use 11.6815.025.030

SRAM Part Code: 11.6815.025.010 Learn More

SRAM Part Code: 00.6815.066.040 Learn More

Replacement IFP for Rockshox Reverb dropper posts.
Backwards compatible to all Reverb models, A1, A2, B1 and C1/AXS

SRAM Part Code:  11.6818.053.001 Learn More

Rockshox Reverb & Reverb Stealth hydraulic hose and lever.
Includes push button remote & spare hose barb fittings.

Hose end not compatible with Connectamajig.

SRAM Part Code: 11.6815.026.050 Learn More

Bleed fitting for Rockshox Reverb Seat Posts.
Fits Stealth and Non-Stealth (external hose) versions
Used for bleeding & setting oil depth for the internal hydraulics.

SRAM Part Code: 00.6815.066.020

Learn More