Comprehensive service kit for Manitou Swinger Air 3 way shocks from 2004-2007
Includes air and damper seal kit, wipers, bumpers, grease, oil & tools to make the job easier.

Learn More

Comprehensive service kit for Manitou Swinger Air 4 & 6 way shocks from 2004-2007
Includes air and damper seal kit, wipers, bumpers, grease, oil & tools to make the job easier

PDF showing contents of o-ring kit is available here

Learn More

Comprehensive service kit for Manitou Swinger Air 4 & 6 way shocks from 2008-2015
Also fits Evolver ISX4 and ISX6, Swinger AIr Expert and Swinger Air Pro from the sime time period.
Includes air and damper seal kit, wipers, bumpers, grease, oil & tools to make the job easier.

Learn More

Configurable service kit for Rockshox Monarch RC3 air shocks from 2011 onwards.
These are piggyback shocks with a 3 position compression lever on the branch.
Also fits Monarch Plus which is piggyback without the compression lever.

Learn More

Air seal kit for RockShox Deluxe & Super Deluxe rear shocks from 2016 onwards
Includes o-rings, quad rings, wiper seal and grease for air can service
Excludes backup rings
Backup rings only need replaced if dirty or excessively worn
Air can service kit including backup rings is available here
We recommend using Slickoleum grease in place of air chamber lube as the air chamber lube tends to migrate away from where it is needed

We've made this kit easy to install by shipping with a full build sheet
The build sheet is printed to scale and shows the contents of the kit and locations for seal install
Seals can be laid out on top of the drawing to check confirm size and location

PDF Build Sheet showing contents of kit is available here Learn More

Premium sealed 1/2" shock hardware for bikes that like to get wet and muddy Custom made to fit your shock eyelet and frame Includes stainless steel pin with Shockcraft's own sealing collars to keep contaminants out, and pre-tensioned IGUS bushing for best fit For pin widths 25 mm and greater both sealing collars and spacers are used Allow 7 days lead time after order confirmation Learn More

Heavy duty stainless steel shock pivot pin with two plastic collars and pre-tensioned IGUS bushing for best fit Custom made to fit your shock eyelet and frame Allow 7 days lead time after order confirmation Learn More

M3 set screw with 8 mm length and half reduced to 2 mm diameter
Part Code: 01-29693

Learn More

Shock conversion kit to replace an eyelet mounted Reaktiv shock on a Trek Fuel, Remedy or Slash with a metric eyelet shock.
Kit contains a pair of pins (one custom manufactured) which use the original 10 mm bolts and spacers.
60 mm Upper pin is 10 mm ID, 15mm OD and duplicates the original pressed in pin with no bushing.
50 mm Lower pin is 10 mm ID, 12.7mm OD and offset to one side.
Both require use of the original 10 mm mounting bolts and spacers.

Fuel requires a 210 x 55 mm shock.
Slash & Remedy require a 230 x 57.5 or 230 x 60 mm shock.

Learn More

Shock conversion kit to replace a trunnion mount Reaktiv shock on a Trek Fuel, Remedy or Slash with a metric eyelet shock.
Kit contains a pair of custom manufactured pins which use the original trunnion bolts and spacers.
54mm Upper pin duplicates the original trunnion shock dimensions and threads.
50mm Lower pin with offset collars for MY2018-2020
40mm Lower pin for MY2021+ Slash

All feature an internal hex to allow easy removal of stuck bolts.

Fuel requires a 210x55mm shock.
Slash & Remedy require a 230x57.5 or 230x60mm shock.
Slash MY2021+ require a 230x62.5mm shock.

Learn More

Shock conversion kit to replace a trunnion mount Reaktiv shock on a Trek Rail with a metric eyelet shock.
Kit contains a pair of custom manufactured pins which use the original trunnion bolts and spacers.
54mm Upper pin duplicates the original trunnion shock dimensions and threads.
40mm Lower pin is centered.
Both feature an internal hex to allow easy removal of stuck bolts.

Rail requires a 230x57.5mm shock and clearance is tight.  You likely need a custom build shock to fit 60mm.

Learn More

Shockcraft air can seal kit for Specialized 2008 Enduro AFR shocks Learn More

Shockcraft complete shock o-ring kit to fit Specialized Seatstay Brain rear shocks from 2007-2008
Installation requires specialised tooling, knowledge and a vacuum bleeder.
Complete rebuild kit also available.

Shockcraft Part Code:  KSI-SPEC-AFR-SEATSTAY-BRAIN-2007-08-ORING
Learn More

Shockcraft complete air and oil seal kit to fit Specialized Fox Micro Brain rear shocks from 2010-17.

PDF showing contents of kit is available here.  Installation requires specialised tooling, knowledge and a vacuum bleeder.

We can service these shocks for you.  Details on service costs are over here.

Shockcraft Part Code: KS-SPEC-MICRO-BRAIN Learn More

Custom Hardware for fitting a Manitou Mara Inline Air shock to a Trek Rail with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes conversion pins and Manitou Mara Inline 230 x 60 mm

Resulting combination bolts straight in.  The Manitou Mara Inline in stock form has firm 4 stage compression damping and is suited to XC style riding.  We recommend a piggy back shock for more aggressive riders (Mara Pro).  Tuning for your weight and riding style is also available.

Please contact us to confirm availability

Learn More

Custom Hardware for fitting a Manitou Mara Pro Air shock to a Trek Rail with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes conversion pins and a Trek Specific Manitou Mara Pro 230 x 60 mm with a short snout conversion

Resulting combination bolts straight in.  The Manitou Mara Pro has adjustable HS & LS comprssion and is suited to all riding styles.  Tuning for your weight and riding style is also available - details here

Please contact us to confirm availability

Learn More

Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Rail with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes conversion pins, modified Marzocchi Bomber CR 230 x 60 mm OR 230 x 65 mm coil shock and coil spring

Resulting combination bolts straight in

Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight.  Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.

Please contact us to confirm availability

Tuning for your weight and riding style is also available - details here

Learn More

Cane Creek Kisuma Coil shock with custom hardware to fit a Trek Slash or Remedy with Thru-Shaft Reaktiv
2018-2020 Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes Shockcraft Deaktiv conversion pins, Cane Creek Kitsuma 230 x 57.5 mm coil shock and coil spring

Resulting combination bolts straight in

Learn More

Special size Manitou Mara Pro Air shock with custom shock pin to fit a Trek Slash or Remedy with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes Shockcraft Deaktiv conversion lower pin and Manitou Mara Pro piggy back shock.
Choose travel from 230 x 60 mm (stock Mara), 230 x 57.5 mm (stock trek ) to 230x65mm if you have clearance to do so.

Resulting combination bolts straight in

Learn More

Custom Hardware and shock stroke modification to fit a Manitou Mara Inline to a Trek Remedy or Slash with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
This conversion allows fitment of a Manitou Mara Inline 230 x 60 or 65 mm air shock
Optional travel reduction on the shock to 57.5 mm and fitting custom shock pins.

Resulting combination bolts straight in.

Learn More

Custom shock modifications and optional hardware to fit a Super Deluxe Coil to Trek Remedy or Slash with Thru-Shaft Reaktiv.
Thru Shaft Reaktiv shocks are 230x 57.5mm air spring with lower hardware offset to one side.
Requires a Rockshox Super Deluxe 230x60mm coil with ball bearing lower mount.
A 230 x 65mm shock can be used with a travel reducing spacer to give 57.5 or 60mm stroke.
Modification service involves removing and modifying the ball bearing shaft head to fit custom shock pins.

Pricing options cover customer supplied pins (from non-thru-shaft air shock) or Shockcraft manufacture.  De-select Shockcraft Manufactured Pins if not required.

Learn More

Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Remedy 2019-21 & Slash 2018-20 in place of a Thru-Shaft Reaktiv shock.
2019-2021 Remedy & 2018-2020 Slash Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with upper 54 mm pin and lower 50 mm offset pin.
Product includes conversion pins, DU Bushings, Marzocchi Bomber CR 230 x 60 mm OR 230 x 65 mm coil shock and coil spring.
We can change the stroke on this shock from 0-65 mm.

Resulting combination bolts straight in.

Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight.  Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.

Please contact us to confirm availability.

Tuning for your weight and riding style is also available - details here

Learn More

Black valve cap to fit schrader valves on forks and rear shocks. Anodised aluminium, o-ring sealed. Learn More

Deep blue valve cap to fit schrader valves on forks and rear shocks. Anodised aluminium, o-ring sealed. Learn More

Red valve cap to fit schrader valves on forks and rear shocks. Anodised aluminium, o-ring sealed. Learn More