We are OPEN
Click here for updates on our current status.
 

Vorsprung Upgrades

Set Descending Direction

20 Item(s)

  1. If you have a Debonair C1 air spring for RockShox Lyrik/Pike, a replacement 35 mm Debonair this B1-style sealhead is now available.
    The C1 sealhead effectively shortens the air shaft and reduces/eliminates the pneumatic topout control present in the B1/B2 air shaft assemblies.
    While the Secus can be physically attached to a C1 Debonair air shaft assembly, it will reduce your travel and may top out noticeably loudly.  We strongly recommend replacing the C1 sealhead with a B1 sealhead.
    Learn More
  2. Smashpot Top Cap (Vorpsprung)

    From: US$27.52

    To: US$34.80

    Replacement Vorsprung Smashpot top caps
    To swap a Smashpot to another fork you'll need the right top cap for the fork
    If changing between fork brands you'll also need the appropriate foot stud (see related products) Learn More
  3. Luftkappe for RockShox Zeb (Vorsprung)

    US$115.02

    Available Ex NZ Supplier 2 Days

    Vorsprung Luftkappe extended air piston and low volume sealhead for RockShox Zeb forks
    Fits 2021-22 RockShox Zeb forks, fits 2023 Zeb if 2021-22 air shaft installed
    Requires 10 mm shaft clamp to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  4. Available for use with a Vorsprung Secus RockShox A2 kit on newer RockShox forks with Buttercups. Learn More
  5. Secus RockShox A3 foot stud to fit a Secus to Rockshox forks

    This supersedes the RockShox A2 foot stud.  The RockShox A3 foot stud fits all the same forks as the A1 & A2 kits, plus more.
    The A1, A2 & A3 kits all share the same footstud part, but the A2 kit also includes spacer shims to allow for fitment on forks that the A1 kit did not fit. The A3 kit includes the spacer shims plus an adaptor for Buttercup air shafts.  Note that the Buttercups will be replaced.

    The A3 kit includes the spacer shims plus 4x o-rings. Learn More
  6. Secus Foot Nut (Vorsprung)

    US$6.90

    In Stock Now

    Spare foot nut for Vorsprung Secus. Learn More
  7. Smashpot Foot Stud Assembly for RockShox Forks (Vorsprung)

    US$64.88

    Available Ex NZ Supplier 2 Days

    Replacement Smashpot foot stud assembly to fit RockShox forks
    Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
    This foot stud assembly can be used to swap a Smashpot from a Fox, Öhlins or DVO fork to a RockShox fork
    You will also need the Smashpot top cap for your specific RockShox fork model (see related products) Learn More
  8. Vorsprung Smashpot coil conversion system for RockShox Zeb 2021+ forks
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  9. For the first time, Vorsprung has created an air spring with a truly better spring rate, everywhere in the travel, than a coil.  The Secus upgrade delivers the first and only single crown air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.

    This version of the Secus fits RockShox forks (see Compatibility info).  Also available for Fox & Marzocchi forks.
    Learn More
  10. Luftkappe for RockShox Pike/Lyrik 2014+ Solo Air (Vorsprung)

    US$100.27

    Available Ex NZ Supplier 2 Days

    Vorsprung Luftkappe air piston with higher volume negative
    Fits 2014-2017 RockShox Pike & Lyrik forks
    Fits 2018+ Lyrik & Yari
    Fits 2018+ Rockshox Pike with an A2 Adapter.
    Not compatible with Debonair V2 or V3 shafts.
    Requires 10 mm shaft clamp to install
    Can be installed as part of any Shockcraft service (book here)

    Learn More
  11. Adapter for installing 2014+ RS Pike/Lyrik Solo Air Luftkappe for A2 chassis Pike into 2018 RockShox Pike with B1 chassis.

    Note 29+ Pike (2017/18) is built on the Lyrik/Yari B1 chassis and does not require this adapter.

    Learn More
  12. HBO Revalve Kit (Shockcraft)

    As low as: US$54.27

    Shockcraft shim and drawing kit for revalving Vorsprung Smashpot HBO
    Allows revalving of the HBO circuit to be softer and allow full use of the last 30 mm of travel
    4 tunes shown on the drawing, Bypass, Soft, Medium and Firm plus Stock
    Drawing lays out the shims required for each tune (paper drawing & to scale)
    Allows full travel without hitting the wall
    Installation requires special tools and knowledge
    Recommend Motorex Supergliss 100K (warm climate), Supergliss 68K (cool climate) or Motorex 2 to 7.5 wt

    Shockcraft can revalve the HBO during service if you don't feel confident doing it yourself Learn More
  13. 10 mm Shaft Clamp (Vorsprung)

    US$29.46

    Last One Left

    Shaft clamp tool for use in installation of Luftkappe & Secus

    Learn More
  14. Smashpot Spring Isolator Perch Universal (Vorsprung)

    US$26.54

    Available Ex NZ Supplier 2 Days

    2 piece isolator system helps keep the coil spring quiet and stanchions protected internally when installing the Vorsprung Smashpot coil conversion
    Retrofittable to older Smashpot Coil Conversion kits
    Can be used in all forks instead of the older style spring perch
    Replaces the PVC liner previously used in the RockShox Zeb and Fox 38 kits

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time. Learn More
  15. Replacement heat shrink for Vorsprung Smashpot coil springs Learn More
  16. Smashpot Travel Adjust Kit (Vorsprung)

    From: US$15.60

    To: US$39.17

    Travel adjust kit for Vorsprung Smashpot
    Includes 10 mm top out travel spacers (x5, silver in picture) & spring travel spacers (2 x 2 mm, 1 x 10 mm, 2 x 20 mm black acetal spacers)
    Required for changing travel if you do not have the original parts Learn More
  17. Smashpot HBO Knob (Vorsprung)

    US$11.80

    Last One Left

    Replacement Hydraulic Bottom Out (HBO) adjuster knob for Vorsprung Smashpot Learn More
  18. Spare heat shrink for Vorsprung Smashpot cartridge tube
    Required if swapping a Smashpot when adjusting travel and/or swapping to a different fork Learn More
  19. Individual coil springs for the Vorsprung Smashpot coil conversion system
    Includes heat shrink as pictured and spring isolator perch (also available separately here)
    Spring rates available from 30-80 lb/in in 5 lb/in increments
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    All sizes ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  20. Vorsprung Smashpot coil conversion system for Rockshox Lyrik and Yari forks
    Fits Rockshox Lyrik and Yari, some Pike & Revelation forks with 35 mm stanchions and M32.5 x0.5mm top-caps (fine thread)
    M32.5x1.0 (Coarse thread) kit for Non Boost Pike is available.
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in.
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More

Set Descending Direction

20 Item(s)