Rebound Piston for all Pro Cartridge rebound forks
Blue aluminium 14.3 mm OD, 7 mm tall
18 holes
Manitou Part Code: 126-27209

PTFE Glide Ring not included (Manitou Part Code: 129-27542-L150)

Shockcraft modified High Flow pistons (rebound & mid valve) are also available
The High Flow pistons greatly increase oil flow on sharp impacts and on very rough ground at speed, increasing reaction speed, removing high speed harshness and allowing more compression damping to be run.

Shaft foot for Air Shaft in Manitou 34 mm forks up to 2020 with the Dorado Air system (incl Mattoc/Magnum 2015-20, Mastodon Pro)
Black aluminium 17 mm OD, 35 mm tall
M8 x 1.0 upper thread with slotted side
M12 x 1.5 lower thread with 8 mm external hex & schrader thread
Manitou Part Code: 121-27478

Piston Band glide ring for all Pro Cartridge rebound forks
White PTFE 16 mm OD, 2.8 mm tall
Manitou Part Code: 129-27542-L150

Piston not included (Manitou Part Code: 126-27209)

Shaft foot for rebound damper in 34 mm Comp & Expert forks
Fits Magnum/Mattoc/Mastodon etc 34 mm forks with 12.7 mm aluminium rebound shaft
Black aluminium 19 mm OD, 31 mm tall
M10 x 1.25 upper thread
M12 x 1.5 lower thread with 8 mm internal hex
Manitou Part Code: 125-29191

Shaft foot for rebound damper in Pro forks
Fits Minute/Machete/Magnum/Mattoc/Mastodon etc forks with 10 mm aluminium rebound shaft
Black aluminium 19 mm OD, 26 mm tall
M8 x 0.5 upper thread
M12 x 1.5 lower thread with 8 mm internal hex
Manitou Part Code: 125-30786

Mattoc/Magnum HBO check spring
Spare part for loss repair.  Located behind HBO cup on compression assembly.
7mm long, 4.2mm OD.

Manitou Part Code: 06-30829

Mattoc/Magnum HBO knob detent spring
Spare part for loss repair.  Located inside HBO knob on top of compression assembly.
3.8mm long, 2mm OD
Sold individually, 2 used in each knob.

Manitou Part Code: 06-29643

Mattoc/Magnum/Mastodon Pro knob kit
For MC² compression damper in Pro level forks
LSC, HSC and HBO knobs with detent balls/springs and fixing nut/screw
Manitou Part Code: 141-32155-K015

Mattoc/Magnum/Mastodon Pro MC² compression damper assembly
Adjustable LSC, HSC and HBO
Comes with knobs, springs and detent balls as shown
Pro version has smaller diameter HBO cup than Expert version
Manitou Part Code: 141-30996-K001

Upgrade your Mattoc Expert to Mattoc Pro specification.
Requires the Mattoc Pro rebound shaft assembly
Compression damping requires either the Mattoc Pro MC2 compression assembly or convert your Expert compression damper with the Pro HBO Cup.
27" wheel size for up to 160 mm travel

Manitou Part Codes: 141-30996-K017 (Rebound Assembly) & 141-30996-K001 (Compression Damper Assembly) or 126-30377 (Mattoc Pro HBO Cup)

Rebound Piston with PTFE Glide Ring for all Pro Cartridge rebound forks.
Blue aluminium 14.3 mm OD, 7 mm tall
18 holes
Manitou Part Code: 126-27209

PTFE Glide Ring
Manitou Part Code: 129-27542-L150