Rebound assembly for Manitou Mattoc Pro and Magnum Pro 27+/29"
Cartridge rebound tube with 16mm piston.  Can be upgraded with High Flow piston.

Manitou Part Code: 141-30996-K025

Learn More

Minute MRD 2008 rebound damper assembly 100-130 mm
193 mm overall length, 163 mm aluminium shaft (8mm)
16 mm piston for use with reduced diameter MRD damper only.
Aluminium End-Cap with M30 x 1mm thread
Manitou Part Code: 83-3283

Learn More

TPC compression damper assembly for 2008 Minute MRD with 16mm damper.
Shim stack piston with adjustable LSC (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 16 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3281

Learn More

Nixon 2006 Cartridge 145 mm rebound damper assembly
Works with TPC+ or CID compression dampers
LSR Rebound adjustable via bottom knob
19 mm piston diameter M20x0.7mm cap threads, 10mm shaft diameter
233 mm overall length
Oil depth 95-100 mm
Manitou Part Code: 83-2813 Learn More

Nixon 2006 Cartridge TPC+ compression damper assembly
Twin piston TPC+ for position sensitive damping
LSC compression adjustable via top knob
19 mm piston diameter 1.125" 18 TPI cap threads
149 mm overall length
Oil depth 95-100 mm
Manitou Part Code: 83-2814

Learn More

Nixon 2007 Cartridge TPC+ compression damper assembly for 145 & 160mm
Twin piston TPC+ for position sensitive damping
LSC compression adjustable via top knob
19 mm piston diameter M30 x 1mm cap threads
149 mm overall length
Oil depth 95-100 mm
Manitou Part Code: 83-3191 Learn More

Nixon 2007 Cartridge TPC+ complete damper assembly for 145mm
TPC+ Twin Piston position sensitive damping (shim stack damper)
LSC compression adjustable via top knob, rebound by lower knob (knobs not included)
19 mm piston diameter M30 x 1mm cap threads fits 2007-2008 Forks
555 mm overall length, 525mm from cap flange over shaft flange

Manitou Part Code: 83-3189 Learn More

Nixon 2007 Cartridge TPC+ complete damper assembly for 160mm (also fits 145mm)
TPC+ Twin Piston position sensitive damping (shim stack damper)
LSC compression adjustable via top knob, rebound by lower knob (knobs not included)
19 mm piston diameter M30 x 1mm cap threads fits 2007-2008 Forks
580 mm overall length, 555mm from cap flange over shaft flange

Manitou Part Code: 83-3193 Learn More

R7 2008 TPC rebound assembly 80-100 mm
198 mm overall length, 163 mm steel tube
27 mm piston
067840 End-Cap with 1.125" 18 TPI thread
Manitou Part Code: 83-3254

Shaft can be used in other 80-100 mm forks (Skareb etc) by changing end-cap and piston with existing

Learn More

TPC compression damper assembly for 2008 R7 MRD with 16mm damper.
Shim stack piston with adjustable LSC (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 16 mm
Cap threads M28.5 x .75 mm
Manitou Part Code: 83-3265

Learn More

R7 SPV damper shaft assembly
227 mm overall length, 163 mm steel tube, 27 mm piston
067840 End-Cap with 1.125 x 18 TPI thread
Evolve type with bleed hole through rebound check valve & blue piston glide ring.
Direct fit into Manitou Minute 2004-5 forks to replace P/N 85-5872

Manitou Part Code: 83-3255

Learn More

Sherman / Nixon SPV damper shaft assembly 110-150 mm
256 mm overall length, 193 mm steel tube, 27.3 mm piston
068159 End-Cap with 1.125" 18 TPI thread
Evolve type with bleed hole through rebound check valve & blue piston glide ring.
Manitou Part Code: 85-5900

Also fits Manitou Minute 2004-2005 in place of 85-5872

Learn More

Rebound damper assembly with shaft, piston, end cap & bottom out bumper Fits Manitou Sherman, most Nixons & Minute (2006 only) Shaft length 192 mm (measured stainless steel sleeve, excludes aluminium ends) Piston approximately 27 mm diameter End cap threads 1.125" x 18 TPI Manitou Part Code: 85-5126 Learn More

Sherman Slider TPC+ compression damper assembly
Twin piston TPC+ for position sensitive damping
LSC compression adjustable via top knob
Float adjustable via circlip position
Includes adjuster knob and retaining screw
26.6 mm piston diameter 1.125" 18 TPI cap threads
335 mm overall length
Oil depth 95 mm
Manitou Part Code: 85-5129

Learn More

Sherman SPV damper shaft assembly 170 mm
276 mm overall length, 213 mm steel tube, 27.3 mm piston
068159 End-Cap with 1.125" 18 TPI thread
Evolve type with bleed hole through rebound check valve & blue piston glide ring.
Manitou Part Code: 85-5901

Learn More

TPC compression damper assembly for 2003-5 Sherman & Gold Label, 2005-6 Nixon & 2006 Minute forks
Shim stack piston with adjustable LSC (predecessor to ABS+)
Comes with knob and knob retention spring as shown
Piston diameter approx 27 mm
Cap threads 1.125" x 18 TPI
Manitou Part Code: 85-5897 Learn More

South rebound damper assembly 60-75 mm Non Adjustable
Fits other forks with end-cap and piston swapped with existing
198 mm overall length, 163 mm steel tube
Piston approximately 25 mm diameter
End cap threads 28.5 x 1 mm
New Old Stock (NOS)
Manitou Part Code: 85-5319

Learn More

Splice & Split TPC rebound damper assembly 80-130 mm Adjustable
Fits other forks with end-cap and piston swapped with existing
198 mm overall length, 163 mm steel tube
Piston approximately 27 mm diameter
End cap threads 28.5 x 1 mm
New Old Stock (NOS)
Manitou Part Code: 83-2176

Learn More

Splice & Split TPC rebound damper assembly 80-130 mm Non Adjustable
Fits other forks with end-cap and piston swapped with existing
198 mm overall length, 163 mm steel tube
Piston approximately 27 mm diameter
End cap threads 28.5 x 1 mm
New Old Stock (NOS)
Manitou Part Code: 83-2175

Adjustable version is 83-2176

Learn More

Stance Kingpin (Dual Crown) TPC+ compression damper assembly
Twin piston TPC+ for position sensitive damping
LSC compression adjustable via internal grub screw
Float adjustable via circlip position
26.6 mm piston diameter M30.5 x 1 mm cap threads
312 mm overall length
Oil depth 230 mm
Manitou Part Code: 83-2343

Learn More

Stance Kingpin (Dual Crown) TPC+ Compression Damper Assembly
Twin piston TPC+ for position sensitive damping
LSC compression adjustable via internal grub screw
Float adjustable via circlip position
26.6 mm piston diameter M30 x 1 mm cap threads
303 mm overall length
Oil depth 230 mm
Manitou part code: 83-2887

Change from 2005 is cap threads are smaller (30 mm vs 30.5 mm)

Learn More

Stance TPC rebound damper assembly 100-150 mm
Fits other forks with end-cap and piston swapped with existing
228 mm overall length, 193 mm steel tube
Piston approximately 28.5 mm diameter
End cap threads 30.5 x 1 mm
Manitou Part Code: 83-2347

Learn More

Stance TPC rebound damper assembly 100-150 mm
Fits other forks with end-cap and piston swapped with existing.
228 mm overall length, 193 mm steel tube
Piston approximately 28.5 mm diameter
End cap threads 30 x 1 mm
New Old Stock (NOS)
Manitou Part Code: 83-2890

Identical to 83-2347 (2005) except end-cap threads are not as tight in the leg

Learn More

Stance TPC Rebound damper assembly 100-150 mm Non Adjustable
Fits other forks with end-cap and piston swapped with existing
228 mm overall length, 193 mm steel tube
Piston approximately 28.5 mm diameter
End cap threads 30.5 x 1 mm
Manitou Part Code: 83-2345

Adjustable version is 83-2347

Learn More

Stance TPC rebound damper assembly 100-150 mm Non Adjustable
Fits other forks with end-cap and piston swapped with existing
228 mm overall length, 193 mm steel tube
Piston approximately 28.5 mm diameter
End cap threads 30 x 1 mm
Manitou Part Code: 83-2889

Identical to 83-2345 (2005) except end-cap threads are not as tight in the leg
Adjustable version is 83-2890

Learn More