Minute 2008 MARS Air 29" Crown Steerer Assembly (CSA/CSU)
Steerer: 1.125" Straight, Aluminium Black
Travel: 80 mm
Stanchions: 32 mm, Gold Anodised Aluminium, 281 mm Length (from top of crown)
Crown: Polished Silver
New Old Stock (NOS)
Manitou Part Number: 83-3299

Learn More

Machete & Marvel ISO air piston
28.2 mm OD, 18 mm tall
M6 threaded puller hole on top
Orange anodised
Use with ISO compression rod (domed top) only
Manitou Part Code: 141-28131-K015
Replacement seal: 141-28131-K022

Learn More

Lockout compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3144

Learn More

27" Non Boost lower leg casting
100x15mm hexlock axle.
Includes bushings and seals.
No axle hardware or stickers.
Matt Black.

Manitou Part Code: 141-30417-K003 Learn More

Replacement piston for Manitou Minute/Tower forks with MARS air coil system
27.1 mm OD (measured across blue glide ring)
Also fits Manitou Nixon

Manitou Part Code: 141-25698

Replacement T-seal for this piston is available here.

Learn More

Minute/Tower Pro MARS air piston
27 mm OD, 18.5 mm tall
M6 threaded puller hole on top
Blue anodised
Manitou Part Code: 141-30416-K023
Replacement Seal: 141-28131-K023
Supersedes 141-25698

Learn More

Minute/Marvel/Tower/Machete Pro 120 mm cartridge rebound damper
Cartridge rebound damper assembly with 16 mm piston and reduced oil volume/weight
Used in Pro models
100-120mm travel only
29" wheel only
Manitou Part Code: 141-29090-K006

Learn More

Damper knob kit for Minute/Machete/Marvel Pro/Expert forks
Contains red compression knob, blue rebound knob, detent balls/springs and retaining screws
Manitou Part Code: 141-31938-K016

Learn More

Minute/Marvel/Tower/Machete 2008+ 29" rebound damper assembly 80-120 mm
250 mm overall length, 215 mm steel tube
28.6 mm piston
072037 End-Cap with M30 x 1mm thread
Manitou Part Code: 83-3295

Learn More

TPC rebound assembly for 2008+ Minute, Marvel & Machete 32 mm forks
80-140 mm travel, 27", 27.5 and 650B wheel sizes.
235 mm overall length, 198 mm steel tube, 28 mm piston diameter
072037 End-Cap with M30 x 1.0 mm thread
Includes rebound knob & screw

Manitou Part Code: 141-30418-K011

Learn More

TPC rebound assembly for Machete Boost & Comp 32 mm forks
80-140 mm travel, up to 29" wheel sizes.
250 mm overall length, 213 mm steel tube, 28 mm piston diameter
072037 End-Cap with M30 x 1.0 mm thread
Includes comp level rebound knob & screw

Manitou Part Code: 141-23991-K005 Learn More

Minute/Marvel/Tower/Machete 2008+ rebound damper assembly 80-140 mm
206 mm overall length, 170 mm steel tube
28.6 mm piston
White End-Cap with M30 x 1mm thread
Manitou Part Code: 83-3341

Learn More

Minute SPV damper shaft assembly (2007)
236 mm overall length, 173 mm steel tube, 29.4 mm piston
End-Cap with M30x1mm thread
Evolve type with bleed hole through rebound check valve & blue piston glide ring.
Manitou Part Code: 83-3146

Learn More

TPC compression damper assembly for 2008+ Minute/Tower/Drake etc
Shim stack piston with adjustable LSC (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3143

Learn More

Compression Rod for Minute Comp & Expert 26 Configurable for 120mm version To be used with TS air piston (with recess). Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt Manitou Part Code: 141-30658-K006 Learn More

Compression rod, spring & cap assembly for Manitou Minute TS Air
Designed for 26" 120 mm but can work with variety of other travel & wheel sizes using appropriate bottom-out bumpers
Includes foot bolt (M8 x 1.0 mm thread)

Manitou Part Code: 141-27988-K010 Learn More

Compression Rod for Minute Comp & Expert 26
Configurable for 130mm version To be used with TS air piston (with recess).
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Code: 141-27988-K011 Learn More

Compression rod, spring & cap assembly for Manitou Minute TS Air
Designed for 26" 140mm, includes 10mm spacer for 130mm but can work with variety of other travel & wheel sizes using appropriate bottom-out bumpers.
300mm overall shaft length.  For 26" forks.
Includes negative coil spring, top-out bumper, bottom-out bumper, bumper support washer and M8x1mm foot bolt.

Manitou Part Code: 141-30658-K007

Learn More

Compression Rod for Minute Comp & Expert 26
Configurable for 120mm version
To be used with TS air piston (with recess).
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Code: 141-27988-K009 Learn More

Compression Rod for Minute Comp or Expert 29" forks Configurable for 130 and 140 mm versions To be used with TS air piston (with recess). Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt Manitou Part Code: 141-30643-K016 Learn More

2007 Minute/Marvel Comp TS air piston
28 mm OD, 13.5 mm tall
13mm recess for TS Air shaft.
Gold or Blue anodised
Manitou part code: 83-3188
Replacement seal: 141-28131-K022

Learn More

Minute/Marvel/Machete TS air piston
28 mm OD, 16.5 mm tall
M6 threaded puller hole on top, 15mm recess underneath.
Gold anodised
Manitou part code: 141-27988-K012
Replacement seal: 141-28131-K022

Learn More

34 mm Foam Ring Pair
6.5mm tall.
Fits 34mm forks from Manitou & Fox

Shockcraft Part Code:  S-FOAMRING-34PAIR Learn More

Replacement lower leg bushings for Manitou 34 mm forks
Including Mattoc, Magnum (2016-17) & Mastodon

Manitou Part Number: 141-30996-K019 Learn More

Valve-cap for Manitou 34 mm forks (Mattoc, Magnum & Mastodon) using IRT, TS or ISO air spring systems
Replacement part or upgrade for early forks using a conventional valve cap
Manitou Part Code: 127-31811

Learn More