We are OPEN
Click here for updates on our current status.
 

Fork Parts

Set Descending Direction

17 Item(s)

  1. Fork service kit for Rockshox Pike & Lyrik forks 2018+.
    Model years 2018 onwards with preset travel and Charger 2/2.1 RC, RCT3 or RC2 dampers.
    Kit is configurable to have wiper seals, all internal seals, oil, tools and upgrades. Learn More
  2. Fork service kit for Rockshox Pike & Lyrik forks with Dual Position Air (DPA) air springs.
    Model years 2014-2017 (Pike) and 2016-17 (Lyrik) with two position travel adjust and RC or RCT3 dampers.
    Kit is configurable to have wiper seals, all internal seals, oil and tools Learn More
  3. Fork service kit for Rockshox Pike & Lyrik forks with Solo Air springs.
    Model years 2014-2017 (Pike) and 2016-17 (Lyrik) with preset travel and RC or RCT3 dampers.
    Kit is configurable to have wiper seals, all internal seals, oil, tools and upgrades. Learn More
  4. Fork service kit for Rockshox Yari forks A1-A2 2016-2020 with Motion Control damping.
    Yari is a Lyrik with a lower spec damper that can be upgraded.  Spring upgrades are the same as Lyrik.
    Kit is configurable to have wiper seals, all internal seals, oil, tools and upgrades. Learn More
  5. Fork Service Kit for RockShox 35 mm Forks

    From: US$1.18

    To: US$755.60

    Fork service kit containing fork seal kit (select either SKF or SRAM), internal seal kit, fork oil, bushing lubricant, Slickoleum assembly grease, oil syringe & optional seal press tool Learn More
  6. Fork Service Kit for RockShox Pike Forks

    From: US$1.18

    To: US$696.49

    Fork service kit containing full rebuild kit (SRAM) or fork seal kit (select either SKF or SRAM), fork oil, bushing lubricant, Slickoleum assembly grease, oil syringe & optional seal press tool Learn More
  7. Individual volume spacer for Rockshox 35mm forks (Pike, Lyrik, Yari etc) with solo air spring (no travel adjust).
    SRAM Part Code (for pack of 10): 11.4018.032.001

    Learn More
  8. RockShox 35 mm Fork Seal Kit (SRAM)

    From: US$2.60

    To: US$31.32

    Original RockShox 35 mm fork seal kit. Fits RockShox Boxxer (2010+), Domain Dual Crown, Lyrik & Pike (2014+) forks Learn More
  9. Debonair V3 (RS calls it Debonair C1) is a new design for mid 2020 release to make bikes ride higher in the travel and use travel more easily.
    It is identified by a longer red shaft foot and a red base-plate which is hollow underneath.

    These are available for self-install or can be installed as part of a Shockcraft service.  Sizes are specific to each model, generation and travel of fork.

    All sizes ordered in from supplier upon customer order.  Usually available approx 2 days lead-time.

    V3 are no longer available for Rockshox Pike A1-A2, use RockShox DebonAir V2 Air Shaft Upgrade (SRAM)

    Learn More
  10. RockShox Lyrik B1+/Yari A1+ 2016+ Charger 2.1 Damper RC2 (SRAM)

    US$421.74

    Available Ex NZ Supplier 2 Days

    Self contained Lyrik/Yari Charger 2.1 RC2 damper for repair or upgrade of RockShox Lyrik B1+ & Yari A1+ 2016+ forks
    Fits 35 mm Lyrik 27/29, Yari 27/29 & Pike A2 29+ forks which use the Lyrik chassis
    Adjustable 4 click High Speed Compression (HSC), 19 click Low Speed Compression (LSC) and Low Speed rebound (LSR)
    580 mm overall length
    For up to 180 mm travel
    Includes adjuster knobs & foot bolt
    Top cap threads 32 x 0.5 mm
    Shipping dimensions:  75 x 75 x 630 mm
    Charger 2.1 is a mid 2019 update with better damping circuits, lower friction and softer compression damping than Charger 2.0

    SRAM Part Code: 00.4020.170.000

    These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.

    Shockcraft can tune this damper for you before delivery.  This improves small bump compliance and support.  Important for hard and fast riders.

    Learn More
  11. Purchase a new Lyrik B1+/Yari A1+ 2016+ Charger 2.1 RC2 damper with Shockcraft Matrix Tune to upgrade your RockShox 35 mm Lyrik 27/29, Yari 27/29 or Pike A2 29+ forks

    Our Matrix Tune & Unharsh Modifications for these dampers are for your weight, bike geometry and riding style.  We remove harshness, increase support and compliance, while providing a lively playful feel.

    Pricing & Availability
    This product is a new RockShox Lyrik B1+/Yari A1+ 2016+ Charger 2.1 Damper RC2 with modifications & tuning, which includes labour, machining, new parts, consumables and fluids

    These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.
    Damper SRAM Part Code: 00.4020.170.000

    Rockeater Tune
    We also have our Rockeater Tuned Lyrik/Yari Charger 2.1 RC2 dampers, info here.

    Want your existing Charger damper tuned?
    You can also send us your existing Lyrik Charger damper or fork for tuning.  We have both Matrix Tune & Rockeater Tune options. Learn More
  12. Purchase a new Lyrik B1+/Yari A1+ 2016+ Charger 2.1 RC2 damper with Shockcraft Rockeater Tune to upgrade your RockShox 35 mm Lyrik 27/29, Yari 27/29 or Pike A2 29+ forks

    The Rockeater Tune is a preconfigured set of modifications and internal tuning which is targeted at 70-80 kg riders who like to ride rough stuff fast without getting beaten
    They have enough range to also work great for riders from 60-90 kg
    But even outside those limits they're better than anything you'll find factory

    The Rockeater Tunes are based on our Matrix & Custom Tune series, incorporating Unharsh Modifications where needed.  But it's simpler.  There are no calculations or data needed.  We will service, install and dyno test to make sure it's running perfectly.

    As the Rockeater Tunes are a one-size-fits-all upgrade, they provide the same performance and improvements for any future owners, preserving your investment.

    Pricing & Availability
    This product is a new RockShox Lyrik B1+/Yari A1+ 2016+ Charger 2.1 RC2 damper with a Rockeater Tune, which includes labour, machining, new parts, consumables and fluids

    The dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.
    Damper SRAM Part Code: 00.4020.170.000

    Matrix Tune
    If you want the full experience of a Matrix Tuned RockShox Lyrik B1+/Yari A1+ 2016+ Charger 2.1 RC2 damper we still have these too.  Information and pricing is here.

    Want your existing Charger damper tuned?
    You can also send us your existing Lyrik Charger damper or fork for tuning.  We have both Matrix Tune & Rockeater Tune options.


    Learn More
  13. 200H service kit for RockShox Yari  A1 with motion control & Dual Position Air
    Contains wiper seals, foam rings, crush washers,
    motion control rebound shaft seals, compression foot seals, piston ring and orings.
    Dual Position Air spring o-rings.

    SRAM Part Code:  00.4315.032.610
    Superceeded by 00.4315.032.622 Learn More
  14. Rebound adjuster knob and bolt for RockShox Yari forks

    SRAM Part Code: 11.4015.404.027 Learn More
  15. RockShox Yari Solo Air A1-A2 200 Hour Service Kit (SRAM)
    For Yari forks fitted with Motion Control damper & solo air spring.

    Rockshox part code:  00.4315.032.623 Learn More
  16. For the first time, Vorsprung has created an air spring with a truly better spring rate, everywhere in the travel, than a coil.  The Secus upgrade delivers the first and only single crown air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.

    This version of the Secus fits RockShox forks (see Compatibility info).  Also available for Fox & Marzocchi forks.
    Learn More
  17. Vorsprung Smashpot coil conversion system for Rockshox Lyrik and Yari forks
    Fits Rockshox Lyrik and Yari, some Pike & Revelation forks with 35 mm stanchions and M32.5 x0.5mm top-caps (fine thread)
    M32.5x1.0 (Coarse thread) kit for Non Boost Pike is available.
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in.
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More

Set Descending Direction

17 Item(s)