Fork service kit containing fork seal kit (select either SKF or SRAM), internal seal kit, fork oil, bushing lubricant, Slickoleum assembly grease, oil syringe & optional seal press tool Learn More

Individual volume spacer for Rockshox 35mm forks (Pike, Lyrik, Yari etc) with solo air spring (no travel adjust).
SRAM Part Code (for pack of 10): 11.4018.032.001

Learn More

SKF Low Friction Fork Seal kit for RockShox Boxxer 35 mm forks
Contains 2x wiper seals, 2x oil seals and 2x foam rings

Learn More

BoXXer Charger 2.1 RC2 damper upgrade kit
Fits 35 mm BoXXer forks 2019+ C1+
Includes complete right side internals

SRAM Part Code: 00.4020.171.000

These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.

Shockcraft can tune this damper for you before delivery Learn More

Purchase a new BoXXer C1+ 2019+ Charger 2.1 RC2 damper with Shockcraft Rockeater Tune to upgrade your RockShox BoXXer 2019+ fork

The Rockeater Tune is a preconfigured set of modifications and internal tuning which is targeted at 70-80 kg riders who like to ride rough stuff fast without getting beaten
They have enough range to also work great for riders from 60-90 kg
But even outside those limits they're better than anything you'll find factory

The Rockeater Tunes are based on our Matrix & Custom Tune series, incorporating Unharsh Modifications where needed.  But it's simpler.  There are no calculations or data needed.  We will service, install and dyno test to make sure it's running perfectly.

As the Rockeater Tunes are a one-size-fits-all upgrade, they provide the same performance and improvements for any future owners, preserving your investment.

Pricing & Availability
This product is a new RockShox BoXXer C1+ 2019+ Charger 2.1 RC2 damper with a Rockeater Tune, which includes labour, machining, new parts, consumables and fluids

The dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.
Damper SRAM Part Code: 00.4020.171.000

Matrix Tune
If you want the full experience of a Matrix Tuned RockShox BoXXer C1+ 2019+ Charger 2.1 RC2 damper we still have these too.  Information and pricing is here.

Want your existing Charger damper tuned?
You can also send us your existing BoXXer Charger damper or fork for tuning.  We have both Matrix Tune & Rockeater Tune options. Learn More

Purchase a new BoXXer C1+ 2019+ Charger 2.1 RC2 damper with Shockcraft Matrix Tune to upgrade your RockShox BoXXer 2019+ fork

Our Matrix Tune & Unharsh Modifications for these dampers are for your weight, bike geometry and riding style.  We remove harshness, increase support and compliance, while providing a lively playful feel.

Pricing & Availability
This product is a new RockShox BoXXer C1+ 2019+ Charger 2.1 RC2 damper with modifications & tuning, which includes labour, machining, new parts, consumables and fluids

These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.
Damper SRAM Part Code: 00.4020.171.000

Rockeater Tune
We also have our Rockeater Tuned BoXXer Charger 2.1 RC2 dampers, info here.

Want your existing Charger damper tuned?
You can also send us your existing BoXXer Charger damper or fork for tuning.  We have both Matrix Tune & Rockeater Tune options. Learn More

Self contained Boxxer Charger 3 RC2 damper for repair or upgrade of RockShox Boxxer forks
Fits 38 mm Boxxer D1+ 2024+ forks
Includes adjuster knobs, butter cup & foot bolt
Charger 3 is a 2023+ design which performs best with Shockcraft modifications and tuning.

SRAM Part Code: 00.4018.063.009

These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.

Shockcraft can tune this damper for you before delivery.  This improves small bump compliance and support.  Important for hard and fast riders.

Learn More

Boxxer B1-B2 2015-2019 coil spring Soft - yellow. 37 lb/in. SRAM Part Code: 11.4015.380.010 Learn More

Rockshox Charger Bladder Assembly for Boxxer B1-B2 (SRAM)
Fits 2015-18 Boxxer World Cup (WC) with Charger 1 dampers.
Total Length Approx 172mm

SRAM Part Code:  11.4018.031.010 Learn More

Purchase a new Pike C1+, Lyrik D1+, Zeb A1+ & Boxxer D1 Charger 3 RC2 damper with Shockcraft Rockeater Tune to upgrade your RockShox Pike, Lyrik, Zeb or Boxxer.

The Rockeater Tune is a preconfigured set of modifications and internal tuning which is targeted at 70-80 kg riders who like to ride rough stuff fast without getting beaten
They have enough range to also work great for riders from 60-90 kg
But even outside those limits they're better than anything you'll find factory

The Rockeater Tunes are based on our Matrix & Custom Tune series, incorporating Unharsh & other Modifications where needed.  But it's simpler.  There are no calculations or data needed.  We will service, install and dyno test to make sure it's running perfectly.

As the Rockeater Tunes are a one-size-fits-all upgrade, they provide the same performance and improvements for any future owners, preserving your investment.

Pricing & Availability
This product is a new RockShox Pike C1+, Lyrik D1+, Zeb A1+, Boxxer D1+ Charger 3 RC2 damper with a Rockeater Tune, which includes labour, machining, new parts, consumables and fluids

The dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.
Pike Damper SRAM Part Code: 00.4318.063.000
Lyrik Damper SRAM Part Code: 00.4318.063.001
Zeb Damper SRAM Part Code: 00.4318.063.002
Boxxer Damper SRAM Part Code: 00.4318.063.009

Want your existing Charger damper tuned?
You can also send us your existing Lyrik Charger damper or fork for tuning.  We have both Matrix Tune & Rockeater Tune options.

Learn More

Rebound knob only for RockShox Lyrik RC, Pike and BoXXer.

SRAM Part Code: 11.4015.404.028 Learn More

For the first time, Vorsprung has created an air spring with a truly better spring rate, everywhere in the travel, than a coil.  The Secus upgrade delivers the first and only single crown air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.

This version of the Secus fits RockShox forks (see Compatibility info).  Also available for Fox & Marzocchi forks.
Learn More