ABS+ compression damper kit to upgrade Manitou 32 mm forks (Minute/Marvel/Machete/Drake/Circus/Tower).
Includes damper and machined aluminium knob with retainer screws.
Pro level with aluminium knobs and piston.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston; does not fit 2020+ R7 or Machete forks (ABS+ damper 141-26532-K001 fits these forks)
Tune: ABS+ production XC stack (CV-11411-03).  Fully tunable and re-valvable to fit any rider weight or terrain.

Shim kit and revalving instructions here.

Manitou Part Code: 141-26532-K013

Learn More

Platform compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated platform with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3294

NOTE:  This is not ABS+.  It does not use shim stacks and is not revalvable.

Learn More

Lockout compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3144

Learn More

Minute/Marvel/Tower/Machete Pro 120 mm cartridge rebound damper
Cartridge rebound damper assembly with 16 mm piston and reduced oil volume/weight
Used in Pro models
100-120mm travel only
29" wheel only
Manitou Part Code: 141-29090-K006

Learn More

32mm Pro 29" 140 mm Cartridge Rebound Damper (Manitou)
Fits Manitou Minute Pro forks with 140mm travel 29" wheel.


Manitou Part Code: 141-29090-K007 Learn More

32mm rebound damper assembly 100-145mm.
Fits Machete JUNIT 24" 2019+, R7 Expert & Machete Comp 2021+

Manitou Part Code: 141-36683-K008 Learn More

TPC compression damper assembly for 2008+ Minute/Tower/Drake etc
Shim stack piston with adjustable LSC (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3143

Learn More

ABS+ Fork compression damper Minute MRD, with alloy knob.
16mm piston for lightweight MRD damper only.

Manitou Part Code: 141-26532-K005 Learn More

ABS+ Fork compression damper kit for Minute/Marvel Expert.
Fits most 32mm Manitou forks from 2007-2019.
M30x1.0 cap threads, red aluminium piston & knob.  Easily tuned.

Manitou Part Code: 141-26532-K010

Learn More

ABS+ damper kit to upgrade Manitou Circus Comp 32 mm jump forks with steel legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Gold anodised alloy piston is 29mm OD (excluding oring) and only fits the chromed steel legs, it will not fit alloy stanchion forks.
Jump tune features a lot of compression damping.
Fitment: M30 x 1.0 mm cap threads, 29 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K006

Learn More

ABS+ damper kit for Manitou Circus Expert 32 mm jump forks with alloy legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Red alloy piston is 28mm OD (excluding oring) and fits fits the majority of Minute, Marvel, Machete and Circus Expert forks.
Fitment: M30 x 1.0 mm cap threads, 28 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K007 Learn More

ABS+ Compression damper kit for Manitou M30 & Markhor forks.  Also fits R7 and some BLACK models.
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Lower priced alternative to R7 ABS+

Manitou Part Code: HB-141-32556-K001

Learn More

ABS+ compression damper kit to fit Manitou J-Unit Machete 20" forks.
Includes damper and plastic adjuster knob with retainer screws.
Comp level with pastic knobs and damper piston.
Shorter length than usual 32mm ABS+ dampers.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: J-unit Kids.  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-36683-K009 Learn More

ABS+ compression damper kit to upgrade Manitou 32 mm forks (Minute/Marvel/Machete/Drake/Circus/Tower).
Includes damper and moulded plastic with retainer screws and index balls/springs.
Comp level with plastic knobs and piston.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: ABS+ production XC stack (CV-11411-03).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K002  Superceded by Manitou Part Code: 141-31938-K002

Learn More

ABS+ Fork Compression Damper with HBO for Minute Pro
Has hydraulic-bottom-out (HBO) for Minute Pro/Expert forks with HBO on rebound shaft.
M30x1.0 threads, blue aluminium piston (27.2mm) for thicker wall stanchions, alloy knob.

Manitou Part Code: 141-31938-K012

Learn More

ABS+ compression damper kit for Manitou R7, M30 & Markhor forks.
Fully tunable and revalvable.
25mm green piston and M26.5x1.00mm cap threads.

Manitou Part Code: 141-26532-K001

Learn More

Fluid Flow compression damper assembly for Axel & Trace Forks
Non adjustable plastic plate with fixed size holes for damping
No knobs required.
Piston diameter approx 25 mm
Cap threads M26 x 1.0 mm
Manitou Part Code: 85-5253

Learn More

Lockout compression damper assembly for 2002-2003 Black & also Skareb Forks
Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 24 mm
Cap threads M26 x 1.0 mm

Manitou Part Code: 85-5299

Learn More

Lockout compression damper for Manitou Black 2003-4 forks.
24mm piston, M26x1.0mm cap threads
Also fits Manitou Skareb.  Same as 85-5868 but smaller thread.

Manitou Part Code: 85-5298

Learn More

Lockout compression damper assembly for Manitou Black 2004-2006 Forks
Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 24 mm
Cap threads M26.5 x 1.0 mm
Manitou Part Code: 85-5868

Learn More

Fluid Flow compression damper assembly for Black Forks 2004-2006. May fit 2002-2003 but threads will be tight.
Non adjustable plastic plate with fixed size holes for damping
No knobs required.
Piston diameter approx 24 mm
Cap threads M26.5 x 1.0 mm
Manitou Part Code: 85-5800

Learn More

Manitou Black SPV damper shaft assembly 80-120 mm
227 mm overall length, 163 mm steel tube, 24.6 mm piston
068159 End-Cap with 1.125 x 18 TPI thread
Evolve type with bleed hole through rebound check valve & blue piston glide ring.
Manitou Part Code: 85-5869

Learn More

Manitou Part Code: 141-27220-K003 Learn More

Manitou Part Code: 141-27220-K002 Learn More

Damper Piston Seat (Manitou)
For repair of cartridge dampers using 16mm pistons
Fits Minute Pro, Mattoc Pro, Mezzer Expert/Pro, R7 Expert/Pro etc

Manitou Part Code: 121-27208

Learn More