Purchase a new Pike C1+, Lyrik D1+, Zeb A1+ & Boxxer D1 Charger 3 RC2 damper with Shockcraft Rockeater Tune to upgrade your RockShox Pike, Lyrik, Zeb or Boxxer.

The Rockeater Tune is a preconfigured set of modifications and internal tuning which is targeted at 70-80 kg riders who like to ride rough stuff fast without getting beaten
They have enough range to also work great for riders from 60-90 kg
But even outside those limits they're better than anything you'll find factory

The Rockeater Tunes are based on our Matrix & Custom Tune series, incorporating Unharsh & other Modifications where needed.  But it's simpler.  There are no calculations or data needed.  We will service, install and dyno test to make sure it's running perfectly.

As the Rockeater Tunes are a one-size-fits-all upgrade, they provide the same performance and improvements for any future owners, preserving your investment.

Pricing & Availability
This product is a new RockShox Pike C1+, Lyrik D1+, Zeb A1+, Boxxer D1+ Charger 3 RC2 damper with a Rockeater Tune, which includes labour, machining, new parts, consumables and fluids

The dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.
Pike Damper SRAM Part Code: 00.4318.063.000
Lyrik Damper SRAM Part Code: 00.4318.063.001
Zeb Damper SRAM Part Code: 00.4318.063.002
Boxxer Damper SRAM Part Code: 00.4318.063.009

Want your existing Charger damper tuned?
You can also send us your existing Lyrik Charger damper or fork for tuning.  We have both Matrix Tune & Rockeater Tune options.

Learn More

Charger 2 Damper Upgrade Kit
Fits 32mm SID 27-29" 2012-2016, Reba 27-29 (2012-2017) and Bluto
Max 120mm travel
RLC (rebound, lockout and compression) adjust.
With One-Lock cable remote.

SRAM Part Code: 00.4018.783.011 Learn More

Service, tuning and upgrade pricing for RockShox Zeb 2021+
Includes labour, consumables and fluids
Excludes wiper seals, repairs & repair parts

Select special service, upgrade & tuning options to view pricing
See Related Products for more info on each selectable item Learn More

Self contained ZEB Charger 3 RC2 damper for repair or upgrade of RockShox ZEB forks
Fits 38 mm ZEB A1+ 2021+ forks
Includes adjuster knobs, butter cup & foot bolt
Charger 3 is a 2023+ design which performs best with Shockcraft modifications and tuning.

SRAM Part Code: 00.4018.063.002

These dampers are ordered in from the NZ Supplier as required.  Lead time is usually 2 days.

Shockcraft can tune this damper for you before delivery.  This improves small bump compliance and support.  Important for hard and fast riders.

Learn More

Damper Upgrade Kit CHARGER2.1 RC2 for Zeb A1+ 2021 (SRAM)
Self contained charger2.1 damper for repair or upgrade from sub-par Charger R/RC versions.
Adjustable 4 click High Speed Compression (HSC), 19 click Low Speed Compression (LSC) and Low Speed rebound (LSR)
2021 Zeb A1 only.  Max 200mm travel.
Includes adjuster knobs & foot bolt.

SRAM Part Code: 00.4318.048.000

Shockcraft can tune this damper for you before delivery.  This improves compliance, support and stability.  Details here for purchase of this damper tuned & modified.

Learn More

Purchase a new Zeb A1 2021+ Charger 2.1 RC2 damper with Shockcraft Matrix Tune to upgrade your RockShox Zeb

Our Matrix Tune & Unharsh Modifications for these dampers are for your weight, bike geometry and riding style.  We remove harshness, increase support and compliance, while providing a lively playful feel.

Pricing & Availability
This product is a new RockShox Zeb A1 2021+ Charger 2.1 RC2 damper with modifications & tuning, which includes labour, machining, new parts, consumables and fluids

This damper can also be used to upgrade a 2023+ Zeb by removing the Charger 3 with buttercup.

Damper SRAM Part Code: 00.4318.048.000

Want your existing Charger damper tuned?
You can also send us your existing Zeb Charger damper or fork for tuning.  Information and pricing is over here. Learn More

If you have a Debonair C1 air spring for RockShox Lyrik/Pike, a replacement 35 mm Debonair this B1-style sealhead is now available.
The C1 sealhead effectively shortens the air shaft and reduces/eliminates the pneumatic topout control present in the B1/B2 air shaft assemblies.
While the Secus can be physically attached to a C1 Debonair air shaft assembly, it will reduce your travel and may top out noticeably loudly.  We strongly recommend replacing the C1 sealhead with a B1 sealhead. Learn More

Spare foot nut for Vorsprung Secus. Learn More

Secus RockShox A3 foot stud to fit a Secus to Rockshox forks

This supersedes the RockShox A2 foot stud.  The RockShox A3 foot stud fits all the same forks as the A1 & A2 kits, plus more.
The A1, A2 & A3 kits all share the same footstud part, but the A2 kit also includes spacer shims to allow for fitment on forks that the A1 kit did not fit. The A3 kit includes the spacer shims plus an adaptor for Buttercup air shafts.  Note that the Buttercups will be replaced.

The A3 kit includes the spacer shims plus 4x o-rings. Learn More

For the first time, Vorsprung has created an air spring with a truly better spring rate, everywhere in the travel, than a coil.  The Secus upgrade delivers the first and only single crown air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.

This version of the Secus fits RockShox forks (see Compatibility info).  Also available for Fox & Marzocchi forks.
Learn More

Available for use with a Vorsprung Secus RockShox A2 kit on newer RockShox forks with Buttercups. Learn More

Spare heat shrink for Vorsprung Smashpot cartridge tube
Required if swapping a Smashpot when adjusting travel and/or swapping to a different fork Learn More

Vorsprung Smashpot coil conversion system for RockShox Zeb 2021+ forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Vorsprung Smashpot coil conversion system for Rockshox Lyrik and Yari forks
Fits Rockshox Lyrik and Yari, some Pike & Revelation forks with 35 mm stanchions and M32.5 x0.5mm top-caps (fine thread)
M32.5x1.0 (Coarse thread) kit for Non Boost Pike is available.
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in.
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Replacement heat shrink for Vorsprung Smashpot coil springs Learn More

Individual coil springs for the Vorsprung Smashpot coil conversion system
Includes heat shrink as pictured and spring isolator perch (also available separately here)
Spring rates available from 30-80 lb/in in 5 lb/in increments
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

All sizes ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Replacement Smashpot foot stud assembly to fit RockShox forks
Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
This foot stud assembly can be used to swap a Smashpot from a Fox, Öhlins or DVO fork to a RockShox fork
You will also need the Smashpot top cap for your specific RockShox fork model (see related products) Learn More

Replacement Hydraulic Bottom Out (HBO) adjuster knob for Vorsprung Smashpot Learn More

2 piece isolator system helps keep the coil spring quiet and stanchions protected internally when installing the Vorsprung Smashpot coil conversion
Retrofittable to older Smashpot Coil Conversion kits
Can be used in all forks instead of the older style spring perch
Replaces the PVC liner previously used in the RockShox Zeb and Fox 38 kits

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time. Learn More

Replacement Vorsprung Smashpot top caps
To swap a Smashpot to another fork you'll need the right top cap for the fork
If changing between fork brands you'll also need the appropriate foot stud (see related products) Learn More

Travel adjust kit for Vorsprung Smashpot
Includes 10 mm top out travel spacers (x5, silver in picture) & spring travel spacers (2 x 2 mm, 1 x 10 mm, 2 x 20 mm black acetal spacers)
Required for changing travel if you do not have the original parts Learn More