You have no items in your shopping cart.
Brand |
Manitou |
Description |
Inline air shock with shim-stack damper |
Model |
|
Appearance |
Black anodised with blue rebound knob and black IPA lever. |
Release Year/s |
|
Decals |
Red M hollow or filled in for aftermarket. Various for OEM |
Damper |
|
i2i Sizes |
6.0x1.25" (152x32mm) 6.5x1.5" (165x38mm) 7.5x2.0" (190x50mm) 7.875x2.0" (200x50mm) 7.875x2.25" (200x56mm) 8.5x2.5" (216x63mm) 190x40mm Metric 190x45mm Metric 210x50mm Metric 210x55mm Metric 230x60mm Metric 230x65mm Metric |
Spring |
Air spring with captive negative chamber Dual layer King-Can available as option for higher air volume |
Remotes |
Convert to external remote with a cable bracket and return spring. Can use MILO 2 position remote or alternative. |
Eyelet Sizes |
1/2" (12.7mm) eyelets on both ends Comes with 08DU08 DU bushings installed |
Tweaks |
|
Updates Since 2015 |
IFP piston upgraded, original was grey, replacement was red |
Upgrade Compatibility |
|
Standard Service with no air can seals |
NZ$166 (incl GST) |
Damper service for shocks which are in good condition but have foamed or degraded damper oil. Price includes labour, damper fluid, damper seals and consumables; excludes air seals and any repairs. Book Here |
Standard Service with individual air can seals |
NZ$192 (incl GST) |
Service for shocks which are in good condition.and have no internal contamination. Price includes labour, damper fluid, damper seals and consumables; includes wiper seal and quad-ring air seals. Excludes any repairs. Book Here |
Standard Service with complete Manitou rebuild kit |
NZ$237.85 (incl GST) |
Service for shocks which require every seal to be replaced. Price includes labour, damper fluid, consumables and a complete McLeod rebuild kit #142-31535-K001 Excludes any repairs. Book Here |
Make your McLeod even better with these upgrades.
King-Can |
The King-Can is a high volume air-can with two internal positions for medium or high volume. The need for a higher volume can is usually determined by your bike linkage design. If the correct air pressure and response gives you too much sag then you need more air volume. Learn More |
Yellow Bleeder Piston |
|
Shim Stack Tuning |
Stock |
Maxima 5 wt fork oil in damper - bleed full with shaft at full compression. 300psi in IFP Slickoleum grease in air-can. |
Shockcraft Recommended |
Motorex 2.5 wt fork oil in damper - vacuum bleed. Shockcraft Hot Oil Pink for heavy & hot usage. 300-500psi in IFP depending on leverage & impact speeds. Slickoleum - air piston & seals |
In Stock
In Stock
Schrader Valve Core with short 16 mm length
5V1 thread
Part Code: 98-30474
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Custom made to order
Custom made to order
Available on backorder
Available on backorder
As low as: US$205.07
Custom made to order
Heavy duty offset stainless steel shock pivot pin with two plastic collars and pre-tensioned IGUS bushing for best fit
Custom made to fit your shock eyelet and frame
This is shock hardware for one end of shock only
Allow 7 days lead time after order confirmation
Important: Check clearance between frame mounting tabs and shock body is sufficient to run offset hardware. Also check suspension and tyre clearance throughout the stroke
In Stock
In Stock
MILO (Manitou Integrated Lock Out) lever kit for rear shock or repair
Kit includes 2 position handle-bar lever, cable & cable housing
Manitou Part Code: 141-31975-K003
Last One Left
Last One Left
Backorder ex-USA
Last One Left
Replacement Internal Floating Piston (IFP) for Manitou McLeod rear shocks
Red version from 2016 Fits all Manitou McLeod dampers
Includes quad-ring seal (-116)
Manitou Part Code: 126-29522