Complete rebuild seal kit for Manitou McLeod & Mara Inline rear shocks
Fits single-can and king-can (dual can)

Manitou Part Code: 142-31535-K001 Learn More

MILO (Manitou Integrated Lock Out) complete kit
Remote lever, cable & shock mounted cable-stop to convert Manitou McLeod or Mara Inline to remote compression adjustment
Lever included is two position.  Can be used with other levers.

Manitou Part Code: 142-31535-K027 Learn More

Internal Update kit for the Manitou McLeod Shocks (2014-20)
Includes new style gold piston and shim kit for update and tuning.
Fixes any knocking and updates valving to match the Mara Shocks

Manitou Part Code: 142-37945

Learn More

Replacement single air can for Manitou McLeod 200 x 56 mm rear shocks Manitou Part Code: 142-31535-K021 Learn More

Replacement Manitou McLeod damper body To fit 200 x 56 mm McLeod shock Includes new IFP, IFP valve and cap, and eyelet bushing Manitou Part Code: 142-31535-K014 Learn More

Replacement Internal Floating Piston (IFP) for Manitou McLeod rear shocks
Red version from 2016 Fits all Manitou McLeod dampers
Includes quad-ring seal (-116)
Manitou Part Code: 126-29522

Learn More

King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Fits 190x 50 mm & 200 x 50 mm McLeod rear shocks Manitou Part Code: 142-31535-K030 Learn More

King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Manitou Part Code: 142-31535-K032 Learn More

King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Manitou Part Code: 142-31535-K033 Learn More

Replacement Manitou McLeod Shaft & Eyelet
To fit 165 x 38 mm McLeod shock

Manitou Part Code: 142-31535-K014 Learn More

Metal 2005 Seal Kit (Manitou)
Includes wiper and bumper

New Old Stock (NOS)
Manitou Part Code: 83-2236 Learn More

Rebound knob for Manitou Metel, Swinger & Revox coil spring rear shocks
Requires de-gas and shaft head removal for installation
28.3 mm overall length, 7.2mm shaft and M6.5x0.75 thread.
Same as Part Code: 83-2876 but includes clicker ball, spring and grub screw.

Manitou Part Code: 83-3012 Learn More

Manitou Metel & Swinger low speed compression knob & needle New Old Stock (NOS) Manitou Part Code: 83-2239 Learn More

Metel Swinger Coil Knob Kit (Manitou)
Fits Swinger coil, Metel, Revox Coil etc.
28.4 mm overall length, 7.1mm shaft, M6.5x0.75 thread
Interchanged with 83-2876 & 83-3012
Kit includes clicker ball, spring and grub screw.

Manitou Part Code:  85-4492 Learn More

MILO (Manitou Integrated Lock Out) lever kit for rear shock or repair
Kit includes 2 position handle-bar lever, cable & cable housing
Manitou Part Code: 141-31975-K003

Learn More

Shock pin and collars to fit 12 mm ID rear shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)
38 mm total width
6 mm bolt hole
Two piece top-hat design
Photo indicative only

Manitou Part Code: 85-6205 Learn More

Shock Hardware Kit - 10 x 22.2 mm (FOX)

10 mm bolt hole, 0.874 inch (22.2mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars, two crush washers and o-rings.
Fits almost all Fox rear shocks.

Ref 214-11-001 FTW 779690
Fox Part Code; 803-03-317

Learn More

Three piece shock hardware.
12.7mm (1/2") pin
10mm bolt hole
40mm total width
Black anodised aluminium.
Works with DU or IGUS bushings.

SRAM Part Code:  11.4115.012.620 Learn More

Shock Hardware Kit - 10 x 60 mm, 7 piece (FOX)

10 mm bolt hole, 60 mm total width
Contains one pair of 1/2" flanged polymer bushings, stainless steel pin, two collars and o-rings
Fits almost all Fox rear shocks
Fits top end of shocks fitted to non-thru shaft Trek Fuel EX 2017-19

Fox Part Code: 803-03-321 Learn More

Three piece shock hardware.
12.7mm (1/2") pin
6mm bolt hole
16mm total width
Black anodised aluminium.
Works with DU or IGUS bushings.

SRAM Part Code:  11.4115.012.320 Learn More

Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 6 mm bolt hole, 21.8 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks

X-Fusion Part Code: 42-XRKBU06218-101 Learn More

Shock Hardware Kit - 6 x 21.85 mm, 5 piece (FOX)

6 mm bolt hole, 0.86 inch (21.85mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref  214-08-006  FTW RW160642

Fox Part Code;  803-03-143 Learn More

Shock Hardware Kit - 6 x 21.85 mm, 9 piece (FOX) 6 mm bolt hole, 0.86 inch (21.84mm) total width Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings. Fits almost all Fox rear shocks. Ref 214-08-006 FTW 793134 Fox Part Code: 803-03-258 Learn More

Shock Hardware Kit - 6 x 22.2 mm, 7 piece (FOX)

6 mm bolt hole, 0.874 inch (22.2mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref 214-08-007  FTW 1020988

Fox Part Code;  803-03-259 Learn More

Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 6 mm bolt hole, 22.2 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks

X-Fusion Part Code: 42-XRKBU06222-101 Learn More