WE ARE OPEN
Click here for updates on our current status.
 

Smashpot Coil Conversion

Set Descending Direction

21 Item(s)

  1. HBO Revalve Kit (Shockcraft)

    As low as: US$56.81

    Shockcraft shim and drawing kit for revalving Vorsprung Smashpot HBO
    Allows revalving of the HBO circuit to be softer and allow full use of the last 30 mm of travel
    4 tunes shown on the drawing, Bypass, Soft, Medium and Firm plus Stock
    Drawing lays out the shims required for each tune (paper drawing & to scale)
    Allows full travel without hitting the wall
    Installation requires special tools and knowledge
    Recommend Motorex Supergliss 100K (warm climate), Supergliss 68K (cool climate) or Motorex 2 to 7.5 wt

    Shockcraft can revalve the HBO during service if you don't feel confident doing it yourself Learn More
  2. Vorsprung Smashpot coil conversion system for Öhlins RXF38 forks
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  3. Replacement Smashpot foot stud assembly to fit DVO Onyx SC forks
    Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
    This foot stud assembly can be used to swap a Smashpot from a RockShox, Fox or Öhlins fork to a DVO Onyx SC fork
    You will also need the Smashpot top cap for the DVO Onyx SC forks (see related products) Learn More
  4. Replacement Smashpot foot stud assembly to fit Öhlins RFX36 forks
    Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
    This foot stud assembly can be used to swap a Smashpot from a RockShox, Fox or DVO fork to an Öhlins RFX36 fork
    You will also need the Smashpot top cap for the Öhlins RFX36 forks (see related products) Learn More
  5. Smashpot HBO Knob (Vorsprung)

    US$12.35

    Last One Left

    Replacement Hydraulic Bottom Out (HBO) adjuster knob for Vorsprung Smashpot Learn More
  6. Vorsprung Smashpot coil conversion system for DVO Onyx SC 2019+ forks
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  7. Vorsprung Smashpot coil conversion system for Öhlins RXF36 m.1 & m.2 forks
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  8. Smashpot Travel Adjust Kit (Vorsprung)

    From: US$16.33

    To: US$41.00

    Travel adjust kit for Vorsprung Smashpot
    Includes 10 mm top out travel spacers (x5, silver in picture) & spring travel spacers (2 x 2 mm, 1 x 10 mm, 2 x 20 mm black acetal spacers)
    Required for changing travel if you do not have the original parts Learn More
  9. Replacement heat shrink for Vorsprung Smashpot coil springs Learn More
  10. Smashpot Spring Isolator Perch Universal (Vorsprung)

    US$27.79

    Available Ex NZ Supplier 2 Days

    2 piece isolator system helps keep the coil spring quiet and stanchions protected internally when installing the Vorsprung Smashpot coil conversion
    Retrofittable to older Smashpot Coil Conversion kits
    Can be used in all forks instead of the older style spring perch
    Replaces the PVC liner previously used in the RockShox Zeb and Fox 38 kits

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time. Learn More
  11. Vorsprung Smashpot coil conversion system for RockShox Zeb 2021+ forks
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  12. Smashpot Coil Conversion for Fox 38 (Vorsprung)

    From: US$398.31

    To: US$407.82

    Vorsprung Smashpot coil conversion system for Fox 38 mm 2021+ forks
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Will not fit E bike forks with smaller ID stanchions and caps
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  13. Vorsprung Smashpot coil conversion system for Rockshox Lyrik and Yari forks
    Fits Rockshox Lyrik and Yari, some Pike & Revelation forks with 35 mm stanchions and M32.5 x0.5mm top-caps (fine thread)
    M32.5x1.0 (Coarse thread) kit for Non Boost Pike is available.
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in.
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  14. Vorsprung Smashpot coil conversion system for Fox 36 forks
    Fits 2015+ Fox 36 forks with M33x0.8mm top-caps
    2021+ Fox 36 forks require the 20 mm top cap adapter
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Will not fit E bike forks with smaller ID stanchions and caps
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  15. Individual coil springs for the Vorsprung Smashpot coil conversion system
    Includes heat shrink as pictured and spring isolator perch (also available separately here)
    Spring rates available from 30-80 lb/in in 5 lb/in increments
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    All sizes ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  16. Spare heat shrink for Vorsprung Smashpot cartridge tube
    Required if swapping a Smashpot when adjusting travel and/or swapping to a different fork Learn More
  17. Replacement Smashpot foot stud assembly to fit Fox forks
    Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
    This foot stud assembly can be used to swap a Smashpot from a RockShox, Öhlins or DVO fork to a Fox fork
    You will also need the Smashpot top cap for your specific Fox fork model (see related products) Learn More
  18. Smashpot Foot Stud Assembly for RockShox Forks (Vorsprung)

    US$67.93

    Available Ex NZ Supplier 2 Days

    Replacement Smashpot foot stud assembly to fit RockShox forks
    Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
    This foot stud assembly can be used to swap a Smashpot from a Fox, Öhlins or DVO fork to a RockShox fork
    You will also need the Smashpot top cap for your specific RockShox fork model (see related products) Learn More
  19. Smashpot Top Cap (Vorpsprung)

    From: US$28.81

    To: US$36.43

    Replacement Vorsprung Smashpot top caps
    To swap a Smashpot to another fork you'll need the right top cap for the fork
    If changing between fork brands you'll also need the appropriate foot stud (see related products) Learn More
  20. Vorsprung Smashpot coil conversion system for Marzocchi Z1 forks
    Fits 2019+ Marzocchi Z1 forks with M33x0.8mm top-caps
    Includes adjustable hydraulic bottom-out system
    Spring rates available from 30-80 lb/in
    Will not fit E bike forks with smaller ID stanchions and caps
    Requires strip down, tools and oil to install
    Can be installed as part of any Shockcraft service (book here)

    Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

    Learn More
  21. 20 mm top cap adapter required to fit Smashpot Coil Conversion to 2021+ Fox 36 forks Learn More

Set Descending Direction

21 Item(s)