Shockcraft

Set Ascending Direction

1-25 of 37

Page:
  1. 1
  2. 2
  1. Schrader Valve Core with short 16 mm length
    5V1 thread
    Part Code: 98-30474

    Learn More
  2. Schrader valve core replacement part for forks & shocks Learn More
  3. Red valve cap to fit schrader valves on forks and rear shocks. Anodised aluminium, o-ring sealed. Learn More
  4. Deep blue valve cap to fit schrader valves on forks and rear shocks. Anodised aluminium, o-ring sealed. Learn More
  5. Black valve cap to fit schrader valves on forks and rear shocks. Anodised aluminium, o-ring sealed. Learn More
  6. Damper and brain cartridge o-ring kit for Specialized S120 forks
    Includes 12 o-rings of mostly bizarre sizes
    Shockcraft asssembled kit containing the fundamentals of Specialized kit: S202-0096 Learn More
  7. Shockcraft's internal seal kit for Specialized E150 fork damper cartridges Learn More
  8. Shockcraft's internal seal kit for Specialized E150 fork adjustable travel air (ATA) cartridges Learn More
  9. M3 set screw with 8 mm length and half reduced to 2 mm diameter
    Part Code: 01-29693

    Learn More
  10. Heavy duty stainless steel shock pivot pin with two plastic collars and pre-tensioned IGUS bushing for best fit Custom made to fit your shock eyelet and frame Allow 7 days lead time after order confirmation Learn More
  11. Premium sealed 1/2" shock hardware for bikes that like to get wet and muddy Custom made to fit your shock eyelet and frame Includes stainless steel pin with Shockcraft's own sealing collars to keep contaminants out, and pre-tensioned IGUS bushing for best fit For pin lengths 25 mm and greater both sealing collars and spacers are used Allow 7 days lead time after order confirmation Learn More
  12. Presta to Schrader valve adapter. CNC aluminium with o-ring seal. Learn More
  13. Spacer rings to reduce overall length and travel of Manitou Mcleod rear shocks Install in air can above top out bumper Four spacers will reduce a 190 x 50 mm McLeod to 185 x 45 mm to fit Giant etc Learn More
  14. Damper internal seal kit for Manitou EFC, SX, SX-Ti, FS & FS-Ti forks 1996 to 1997 including Palmer Stroker

    1995 EFC has black & red flame graphics, with smaller diameter damper (kit available here)
    1996 EFC has red & black band graphics, with larger diameter damper shared with the 1996 & 1997 SX & FS forks
    1996 SX has black lower legs and yellow adjuster knobs
    1997 SX has white lower legs and red/black adjuster knobs
    1997 SX-Ti has red lower legs and red/black adjuster knobs
    1997 FS has white lower legs, red/black adjuster knobs & bulge sleeves on top of the stanchions
    1997 FS-Ti has red lower legs, red/black adjuster knobs & bulge sleeves on top of the stanchions
    1997 FS-Ti Palmer Stroker has green lower legs, red/black adjuster knobs & bulge sleeves on top of the stanchions

    Learn More
  15. Damper internal seal kit for Manitou EFC forks 1995 only
    1996 EFC uses a different kit

    1995 EFC has black & red flame graphics, with smaller diameter damper
    1996 EFC has red & black band graphics, with larger diameter damper shared with the 1996 & 1997 SX & FS forks

    Learn More
  16. 3 cc syringe of low viscosity Lightning Bearing Grease Learn More
  17. Replacement IFP (internal floating piston) set for DT Equalizer 2 & 3 rear shocks
    Designed and Manufactured by Shockcraft
    These were pull shocks fitted to Scott Genius Bikes in the mid 00's to early 10's
    Originals have seals which are unservicable
    These take standard O-ring seals
    Sold as a pair, only available with Shockcraft Service Learn More
  18. Hot Oil Pink 250 cc for rear shocks and fork cartridge dampers
    14 cSt @ 40°C

    Learn More
  19. Hot Oil Green 250 cc for rear shocks and fork cartridge dampers
    18-19 cSt @ 40°C

    Learn More
  20. Contains new shaft seal, shaft wiper & shaft bushing Fits older Fox Vanilla/Vanilla R/RX/RC/TC shocks with 3/8" (9.53 mm) shafts Aftermarket kit supplied by Shockcraft Learn More
  21. Fork Service Kit Fox 40 Forks 2005-2015

    From: $114.90

    To: $144.40

    Fork service kit for F40 forks 2005-2015 using Open Bath R dampers or FIT R/RC2 dampers.
    Kit contains SKF fork seal kit, fork oil, bushing lubricant, air chamber lubricant, Slickoleum assembly grease & oil syringe.

    Learn More
  22. Fork Service Kit Fox 36 Forks 2005-2015

    From: $219.90

    To: $225.90

    Fork service kit for F36 forks 2005-2015 using Open Bath R dampers or FIT R/RLC/RC2 dampers.
    Kit contains SKF fork seal kit, fork oil, bushing lubricant, air chamber lubricant, Slickoleum assembly grease, oil syringe & optional seal press tool

    Learn More
  23. Fork Service Kit Fox 34 Forks 2012-2015

    From: $114.90

    To: $225.90

    Fork service kit for F34 forks 2012-2015 using Open Bath R/RL/RLC dampers, FIT CTD or CTD O/C dampers.
    Kit contains SKF fork seal kit, fork oil, bushing lubricant, air chamber lubricant, Slickoleum assembly grease, oil syringe & optional seal press tool

    Learn More
  24. Fork service kit for F32, F34, F36 & F40 forks 2016+ using contained FIT4 (CTD, RC2) or GRIP dampers.
    Kit contains SKF fork seal kit, fork oil, bushing lubricant, air chamber lubricant, Slickoleum assembly grease, oil syringe & optional seal press tool.

    This kit replaces the 5wt teflon oil in GRIP dampers and lower legs with dedicated bath and damper oils.  The GRIP dampers do not suffer any more or less oil mixing than other cartridge dampers and teflon does not float in oil.

    Learn More
  25. Shock hardware custom fitted in our workshop to your shock's individual eyelet tolerances. Widths from ~16mm on up. Virtually any diameter and bolt hole possible. Includes stainless steel pin with plastic collars and standard IGUS bushing Allow 7 days lead time after receipt of shock Learn More

Set Ascending Direction

1-25 of 37

Page:
  1. 1
  2. 2