You have no items in your shopping cart.
Shock Hardware
We have collected together a large range of shock hardware with various sizes and specifications. Use our Find Hardware by Size tool to find the right kit to fit your shock & bike.
If the size you need is not listed please contact us as we can check if it is available at one of our suppliers. If the size you need is not available "off-the shelf" or you want the best fit for your application we can make our custom Straight Axle Shock Hardware to fit.
Custom Fit or Offset
Mountain Bike Shock eyelets come in a multitude of sizes and within each of those sizes a range of tolerances. To acheive the best performance and longest life our custom made Straight Axle Shock Hardware is designed, toleranced and selected by our mechanical engineer to work best in your application.
The basis for our custom Straight Axle Shock Hardware is a three piece system with a pin and two collars. This setup is stiffer, stronger and longer lasting than the typical two piece. Correctly toleranced, it also runs smooth and free without play. IGUS Pre-tensioned bushings are used in our self-install hardware for maximum performance and longevity. Options for specific applications include reamed fits, threaded bores, locking screws, o-ring and quad-ring seals and spherical ball mounts.
Suspension Pivot Hardware
Shockcraft can build and supply all the components to rebuild the pivots in suspension linkages using bushings as well as bearings. We carry a large range of bearings, bushings and fasteners while manufacturing custom axles, pins and spacers. Contact us for more details.
-
Mounting Hardware Kit - 12.7 x 10 x 22.2 mm, 9 Piece (Fox)
US$40.36Available on backorder
Shock Hardware Kit - 10 x 22.2 mm (FOX)
10 mm bolt hole, 0.874 inch (22.2mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars, two crush washers and o-rings.
Fits almost all Fox rear shocks.
Ref 214-11-001 FTW 779690
Fox Part Code; 803-03-317
Learn More -
Trek Rail Manitou Mara Pro Conversion (Shockcraft)
From: US$580.73
To: US$1,161.75
Custom Hardware for fitting a Manitou Mara Pro Air shock to a Trek Rail with Thru-Shaft Reaktiv
Learn More
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes conversion pins and a Trek Specific Manitou Mara Pro 230 x 60 mm with a short snout conversion
Resulting combination bolts straight in. The Manitou Mara Pro has adjustable HS & LS comprssion and is suited to all riding styles. Tuning for your weight and riding style is also available - details here
Please contact us to confirm availability -
Contact us for alternative options
Cane Creek DB Coil Rear Shock for Giant Reign
Trunnion Mount top (54 mm wide, M10 x 1.0 threaded holes)
Open lower eyelet (no bushing) to fit Giant main pivot
205 mm eye to eye length 62.5 mm stroke
9.5 mm shaft
Fits Giant Reign 2018+
Spring included - select your rate (use our spring calculator to work out spring rate) Learn MoreOut of stock
-
Mounting Hardware Kit - 12.7 x 8 x 40 mm, 9 Piece (Fox)
US$31.50Available on backorder
Shock Hardware Kit - 1/2" (12.7 mm) x 8 mm x 40 mm, Fox 9 piece
8 mm bolt hole, 40 mm 1.575") total width
Contains one pair of flanged polymer bushings, aluminum pin, four collars and o-rings.
Ref 214-09-045
FTW 1095786
Fox Part Code: 803-03-336
Note - image is representative only Learn More -
Fitted Straight Axle Shock Hardware - One End (Shockcraft)
US$71.33Custom made to order
Shock hardware custom fitted in our workshop to your shock's individual eyelet tolerances. Widths from ~16mm on up. Virtually any diameter and bolt hole possible. Includes stainless steel pin with plastic collars and standard IGUS bushing Allow 7 days lead time after receipt of shock Learn More -
Self-Install Sealed Straight Axle Shock Hardware - One End (Shockcraft)
US$83.22Custom made to order
Premium sealed 1/2" shock hardware for bikes that like to get wet and muddy Custom made to fit your shock eyelet and frame Includes stainless steel pin with Shockcraft's own sealing collars to keep contaminants out, and pre-tensioned IGUS bushing for best fit For pin widths 25 mm and greater both sealing collars and spacers are used Allow 7 days lead time after order confirmation Learn More -
Self-Install Straight Axle Shock Hardware - One End (Shockcraft)
US$71.33Custom made to order
Heavy duty stainless steel shock pivot pin with two plastic collars and pre-tensioned IGUS bushing for best fit Custom made to fit your shock eyelet and frame Allow 7 days lead time after order confirmation Learn More -
1/2" Low Friction Flanged Bushing Pair
US$10.67Please enquire
Flanged bushings for shock eyelets
Learn More
Installed as a pair with o-rings (not included) for new fitment or repair
Straight replacement for similar bushings from Fox, Trelleborg etc
Note these have a tighter ID than Fox & IGUS
They can be reamed to size after installation if they are too tightOut of stock
-
Faux Flange Adapters - pair with IGUS bushing (Shockcraft)
From: US$8.92
To: US$26.69
Loose flange adapter collars (pair) with standard size IGUS bushing and o-rings for repair of worn Fox flanged bushings.
Learn More
One kit repairs one end of rear shock. -
Premium sealed shock hardware for bikes that like to get wet and muddy. 21.9 mm width to fit 1/2" shock eyelets. Heavy duty stainless steel wear surfaces, IGUS pre-tensioned bushing for maximum life and Shockcraft's own sealing collars to keep contaminants out. Learn More
-
Offset Shock Hardware - One End (Shockcraft)
US$89.16Custom made to order
Heavy duty offset stainless steel shock pivot pin with two plastic collars and pre-tensioned IGUS bushing for best fit
Learn More
Custom made to fit your shock eyelet and frame
This is shock hardware for one end of shock only
Allow 7 days lead time after order confirmation
Important: Check clearance between frame mounting tabs and shock body is sufficient to run offset hardware. Also check suspension and tyre clearance throughout the stroke -
OEM shock hardware for Specialized Stumpjumper/Safire/Epic frames that use AFR shocks with 12 mm eyelet Upgraded for lower friction & longer life with an IGUS pre-tensioned bushing Available in three lengths Learn More
-
2 piece shock reducers to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)
Learn More
Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install 3 piece hardware is suitable for these shocks -
Shock pin and collars to fit 12 mm ID shock eyelets (including early Manitou, X-Fusion, RockShox & Specialized AFR rear shocks)
Learn More
Modern shocks usually use 12.7 mm (1/2") ID eyelets; our fitted & self-install hardware is suitable for these shocks -
1/2" DU Bushing (Monocrome)
US$3.86In Stock
Straight replacement for shock eyelets in Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide.
Learn More -
1/2" IGUS Eyelet Bushing
US$8.92In Stock
Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide. Available with shock eyelet pressing or complete custom fitted shock hardware.
Learn More -
1/2" Pre-tensioned IGUS Eyelet Bushing
US$17.77In Stock
Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets.
Learn More
1/2" ID x 1/2" Wide.
Pre-tensioned bushing to accomodate small variations in eyelet diameter and shape without binding or play Available with shock eyelet pressing or complete custom shock hardware -
12 mm Manitou Wide DU Bushing (Monocrome)
US$3.86In Stock
Straight replacement for Manitou Wide (14 mm) Rear Shock Eyelets 12 mm x 14 mm x 14 mm Learn More -
12 mm DU Bushing (Monocrome)
US$3.86In Stock
Straight replacement for
Manitou, X-Fusion & some RockShox
Rear Shock Eyelets
12 mm x 14 mm x 12 mm Learn More -
12 mm IGUS Eyelet Bushing
US$8.92In Stock
Harder wearing upgrade for Manitou, X-Fusion & some RockShox Rear Shock Eyelets 12 mm x 14 mm x 12 mm Available with shock eyelet pressing Learn More -
12 mm Pre-tensioned IGUS Eyelet Bushing
US$11.89In Stock
Harder wearing upgrade for Manitou, X-Fusion & some RockShox Rear Shock Eyelets 12 mm x 14 mm x 12 mm Pre-tensioned bushing to accomodate small variations in eyelet diameter and shape without binding or play Available with shock eyelet pressing Learn More -
10 mm IGUS Eyelet Bushing
US$8.92In Stock
Harder wearing upgrade for
older RockShox
Rear Shock Eyelets
10 mm x 12 mm x 12 mm
Available with shock eyelet pressing Learn More -
DU Bushings - various sizes
US$3.86Economical standard replacement for shock eyelet bushings Various sizes available - select required dimensions below Bushings sold individually Learn More -
IGUS Flanged Bushings
US$8.92Hard wearing, self lubricating and low maintenance flanged IGUS bushings Various sizes available - select required dimensions Bushings sold individually Learn More -
5th Element Spherical Bearing (5th Element)
US$9.51Out of stock - contact us for other solutions
Application: 5th Element Shock Mounts ID: 3/8" (9.5 mm), OD: 16 mm, Body W: 7 mm, Ball W: 5/16" (7.9 mm) Learn More
Shock Hardware
Recent Posts
-
Good suspension should be stable and supportive while being planted, y... -
Deans Bank 6 Hour, Wanaka Bike Wanaka is back with their Deans Bank r... -
Bike of the Month, October 2023 Transition Smuggler with Ready Mix Tu...
Categories
Instagram
