Secus Fox A3 foot stud to fit a Secus to Fox 40 mm stanchioned forks
This kit includes the same foot stud as the one in the Fox A1 kit, but includes a replacement air piston for the Fox 40 Learn More

Secus Fox A2 foot stud to fit a Secus to Fox 38 mm stanchioned forks Learn More

Adapter for installing 2014+ RS Pike/Lyrik Solo Air Luftkappe for A2 chassis Pike into 2018 RockShox Pike with B1 chassis.

Note 29+ Pike (2017/18) is built on the Lyrik/Yari B1 chassis and does not require this adapter.

Learn More

Vorsprung Luftkappe air piston with higher volume negative
Fits 2014-2017 RockShox Pike & Lyrik forks
Fits 2018+ Lyrik & Yari
Fits 2018+ Rockshox Pike with an A2 Adapter.
Not compatible with Debonair V2 or V3 shafts.
Requires 10 mm shaft clamp to install
Can be installed as part of any Shockcraft service (book here)

Learn More

Vorsprung Smashpot coil conversion system for Fox 36 forks
Fits 2015+ Fox 36 forks with M33x0.8mm top-caps
2021+ Fox 36 forks require the 20 mm top cap adapter
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Will not fit E bike forks with smaller ID stanchions and caps
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Fox 2021 34 GRIP2 Cartridge - 150mm VVC HSR / LSR / HSC/ LSC
Complete damper assembly with adjuster knobs for repair, upgrade or tuning

Available stock or with Shockcraft tuning

Not usually stocked.  Ordered in from NZ Supplier.  ETA usually 30 to 90 days
Fox Part Code:  820-18-400-KIT

Learn More

Fox Service Set 2021 36 GRIP2 Cartridge - 180mm VVC HSR / LSR / HSC/ LSC (Fox)
Also fits Marzocchi Z1 2019+ forks
Complete damper assembly with adjuster knobs for repair, upgrade or tuning

Available stock or with Shockcraft tuning

Fox Part Code:  820-18-335-KIT

Learn More

Vorsprung Smashpot coil conversion system for Fox 38 mm 2021+ forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Will not fit E bike forks with smaller ID stanchions and caps
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Replacement Smashpot foot stud assembly to fit Fox forks
Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
This foot stud assembly can be used to swap a Smashpot from a RockShox, Öhlins or DVO fork to a Fox fork
You will also need the Smashpot top cap for your specific Fox fork model (see related products) Learn More

Fox 2021 38 GRIP2 Cartridge - 180mm VVC HSR / LSR / HSC/ LSC
Complete damper assembly with adjuster knobs for repair, upgrade or tuning

Available stock or with Shockcraft tuning

Fox Part Code:  820-18-336-KIT

Learn More

Fox 2021 40 GRIP2 Cartridge - 203 mm VVC HSR / LSR / HSC/ LSC
Complete damper assembly with adjuster knobs for repair, upgrade or tuning

Available stock or with Shockcraft tuning

Not usually stocked.  Ordered in from NZ Supplier.  ETA usually 30 to 90 days
Fox Part Code:  820-18-337-KIT

Learn More

20 mm top cap adapter required to fit Smashpot Coil Conversion to 2021+ Fox 36 forks Learn More

Roll pin tool for use in installation of Luftkappe in Fox Float 34 Evol 2018+, 34 NA2 2016-17 & 36 Evol 2018+ forks

Learn More

Vorsprung Luftkappe air piston and low volume sealhead for Fox 34 NA2 forks
Fits 2016-17 Fox Float 34 NA2 Performance & Factory Series forks (130+ mm only)
Requires shaft clamp to install and is threaded onto air shaft.
Included low volume sealhead increases negative volume similar to 2018 Evol spec
Can be installed as part of any Shockcraft service (book here)

Learn More

Vorsprung Luftkappe air piston with higher volume negative
Fits 2018+ Fox Float 36 Evol Performance & Factory Series forks
Requires roll pin tool to install
Can be installed as part of any Shockcraft service (book here)

Learn More

Shaft clamp tool for use in installation of Luftkappe & Secus

Learn More

Vorsprung Luftkappe air piston with higher volume negative
Fits 2018+ Fox Float 34 Evol Performance & Factory Series forks
Fits 2021+ Fox 38 forks
Requires roll pin tool to install as it is pinned to the air shaft.
Can be installed as part of any Shockcraft service (book here)

Learn More

Shockcraft Engineered Damper Piston
Shockcraft engineered and manufactured damper piston for tuning specific forks or shocks.  These pistons are designed to solve specific fitment and performance problems with stock fork or shock dampers in conjunction with Shockcraft tuning packages. 

Pistons are specific to and unique to fit each application.

Only available from Shockcraft Learn More

Air piston removal tool for Fox 40 mm forks
For use in installation of Vorsprung Secus Learn More

Replacement Hydraulic Bottom Out (HBO) adjuster knob for Vorsprung Smashpot Learn More

Vorsprung Smashpot coil conversion system for Marzocchi Z1 forks
Fits 2019+ Marzocchi Z1 forks with M33x0.8mm top-caps
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Will not fit E bike forks with smaller ID stanchions and caps
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Charger 2.1 Damper Seal-Head.
Also fits Charger 2.0 damper
Red colour and lower friction seal than previous
Use for repair or service.

SRAM Part Code: 11.4018.107.000 Learn More

SKF seal head upgrade/replacement for RockShox charger 1 dampers
Fits Pike, Lyrik & Boxxer forks, both RC & RCT3 with Charger 1
Upgrade for early Pike forks built with Trelleborg seal head.
Replacement part for seal head on later model Pike, Lyrik & Boxxer forks

SRAM Part Code: 11.4015.353.030 Learn More

Mezzer M35x1.0 Cartridge End Cap (Manitou) Provides bottom-out bumper interface on Mezzer Pro forks. Required when upgrading Mezzer Expert to Pro damper Manitou Part Code: 128-35666 Learn More

Vorsprung Smashpot coil conversion system for Rockshox Lyrik and Yari forks
Fits Rockshox Lyrik and Yari, some Pike & Revelation forks with 35 mm stanchions and M32.5 x0.5mm top-caps (fine thread)
M32.5x1.0 (Coarse thread) kit for Non Boost Pike is available.
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in.
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More