Replacement Smashpot foot stud assembly to fit RockShox forks
Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
This foot stud assembly can be used to swap a Smashpot from a Fox, Öhlins or DVO fork to a RockShox fork
You will also need the Smashpot top cap for your specific RockShox fork model (see related products) Learn More

Vorsprung Smashpot coil conversion system for RockShox Zeb 2021+ forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Vorsprung Smashpot coil conversion system for Öhlins RXF38 forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Vorsprung Smashpot coil conversion system for Öhlins RXF36 m.1 & m.2 forks
Includes adjustable hydraulic bottom-out system
Spring rates available from 30-80 lb/in
Requires strip down, tools and oil to install
Can be installed as part of any Shockcraft service (book here)

Ordered in from NZ supplier upon customer order.  Usually available approx 2 days lead-time.

Learn More

Replacement Smashpot foot stud assembly to fit Öhlins RFX36 forks
Vorsprung Smashpot kits for RockShox, Fox, Öhlins & DVO use the same core assembly (inner & outer) with a different foot stud assembly & top cap
This foot stud assembly can be used to swap a Smashpot from a RockShox, Fox or DVO fork to an Öhlins RFX36 fork
You will also need the Smashpot top cap for the Öhlins RFX36 forks (see related products) Learn More

Service, tuning and upgrade pricing for RockShox Zeb 2021+
Includes labour, consumables and fluids
Excludes wiper seals, repairs & repair parts

Select special service, upgrade & tuning options to view pricing
See Related Products for more info on each selectable item Learn More

Shockcraft manufactured high flow piston kit.
Fits and works in TTX22 and STX22 forks (coil or air) only.
Kit contains piston, glide ring and 4 pages of paper drawings.

Shockcraft Part Code:  SC-PISTON-OHLINS-22HF-KIT

Learn More

Fork service & upgrade kit containing fork seal kit, fork oil, Slickoleum assembly grease & oil syringe.
Service kit works for all internals (air, coil, TTX22, STX22, TTX18 etc etc).
Optional high flow piston kit works for TTX22 and STX22 versions only.

Learn More

Shims, balls & springs for DIY tuning of Manitou ABS+ compression dampers
ABS+ tuning guide can be found here
Manitou Part Code: 141-32511-K001

Learn More

ABS+ damper with MILO remote lockout kit
Fits 2020+ Manitou R7 Pro, R7 Expert & Machete Comp forks
Threads M29.6x0.8mm.
Can be converted to crown adjust.

Manitou Part Code: 141-38117-K029 Learn More

ABS+ compression damper kit to fit Manitou J-Unit Machete 20" forks.
Includes damper and plastic adjuster knob with retainer screws.
Comp level with pastic knobs and damper piston.
Shorter length than usual 32mm ABS+ dampers.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: J-unit Kids.  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-36683-K009 Learn More

ABS+ damper kit to upgrade Manitou Circus Comp 32 mm jump forks with steel legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Gold anodised alloy piston is 29mm OD (excluding oring) and only fits the chromed steel legs, it will not fit alloy stanchion forks.
Jump tune features a lot of compression damping.
Fitment: M30 x 1.0 mm cap threads, 29 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K006

Learn More

ABS+ compression damper kit to upgrade Manitou 32 mm forks (Minute/Marvel/Machete/Drake/Circus/Tower).
Includes damper and machined aluminium knob with retainer screws.
Pro level with aluminium knobs and piston.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston; does not fit 2020+ R7 or Machete forks (ABS+ damper 141-26532-K001 fits these forks)
Tune: ABS+ production XC stack (CV-11411-03).  Fully tunable and re-valvable to fit any rider weight or terrain.

Shim kit and revalving instructions here.

Manitou Part Code: 141-26532-K013

Learn More

ABS+ damper kit for Manitou Circus Expert 32 mm jump forks with alloy legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Red alloy piston is 28mm OD (excluding oring) and fits fits the majority of Minute, Marvel, Machete and Circus Expert forks.
Fitment: M30 x 1.0 mm cap threads, 28 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K007 Learn More

ABS+ compression damper kit to upgrade Manitou 32 mm forks (Minute/Marvel/Machete/Drake/Circus/Tower).
Includes damper and moulded plastic with retainer screws and index balls/springs.
Comp level with plastic knobs and piston.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: ABS+ production XC stack (CV-11411-03).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K002  Superceded by Manitou Part Code: 141-31938-K002

Learn More

ABS+ compression damper kit for Manitou R7, M30 & Markhor forks.
Fully tunable and revalvable.
25mm green piston and M26.5x1.00mm cap threads.

Manitou Part Code: 141-26532-K001

Learn More

MILO (Manitou Integrated Lock Out) kit for ABS+ damper used in 2011+ forks
Kit includes 2 position handle-bar lever, cable, cable housing, fork mounted cable stop, return spring, ABS+ damper cap and screw
Will adapt any ABS+ fork damper to remote (handlebar) lockout operation
Manitou Part Code: 141-26896

Learn More

Labour for replacement or resizing of fork bushings to fix looseness, knocking or play.  Includes burnishing to final size.

Available immediately for 28.6 mm, 30 mm, 32 mm, 34 mm, 35 mm, 36 mm, 37 mm, 38 mm and 40 mm forks.  Other sizes will have a slight delay as we manufacture tooling.

Note wiper seals need removed for this service and almost always require replacement.

Price excludes cost of replacement bushings.
Price shown is for labour when lower legs are removed from fork and provided dry
If whole fork is provided then minimum additional labour will be Lower Leg Service labour, as per pricing here

Learn More

Final sizing and tolerancing of fork bushings to ensure minimal friction and maximum performance.  Cures issue of friction and stiction to improve small bump control.  Also reduces break-in time of a new fork to zero.
Burnish sizes are carefully chosen to provide maximum oil film thickness without any knocking or noticable play.

Available immediately for 30 mm, 32 mm, 34 mm, 35 mm and 36 mm forks.  Other sizes will have a slight delay as we manufacture tooling.

Learn More

For upgrade of Mezzer Expert or repair on Mezzer Pro
Adds a second air valve and air chamber for tuning last half of the stroke.

Manitou Part Code: 141-36713-K021 Learn More

Manitou Mattoc IRT Upgrade Kit 2020+
Adds a second air chamber for independent tuning of mid-end stroke.
Compatible with 2020+ Mattoc Pro, Mastodon Pro & Circus Pro can be fitted to Comp with a piston swap.
Installs with a cassette tool and uses a flatter cap than earlier versions

Manitou part code: 141-32668-K010

Learn More

IVA: Incremental Volume Adjust A 5 position spacer system to tune positive air chamber volume and increase progression
Thread M31 x 0.8 mm
Finer thread than the Mattoc/Magnum IVA upgrade kit

Manitou Part Code: 141-35384-K006 Learn More

Upgrade your Mattoc Expert to Mattoc Pro specification.
Requires the Mattoc Pro rebound shaft assembly
Compression damping requires either the Mattoc Pro MC2 compression assembly or convert your Expert compression damper with the Pro HBO Cup.
27" wheel size for up to 160 mm travel

Manitou Part Codes: 141-30996-K017 (Rebound Assembly) & 141-30996-K001 (Compression Damper Assembly) or 126-30377 (Mattoc Pro HBO Cup)

Learn More

Manitou Racing Development (MRD) Upgrade kit.
Fits Dorado 2009-2019
Includes Dorado Infinite Rate Tune (IRT) air spring upgrade kit, Trail Side Relief bleeder caps
& high performance MRD wiper seals

Manitou Part Code: 141-32409-K001

Learn More

IRT: Infinite Rate Tune
Adds a second air chamber for independent tuning of mid-end stroke.
Coarse thread M32x1.0mm for 2014-2019 Mattoc, Magnum, Mastodon Pro and Expert level forks.
Manitou Part Code: 141-32668-K003 Learn More